Road Angel vantage Product Manual & User Manual - page 17
10
3. Positioning in your car
On the windscreen
1.
Hold the suction cup against the windscreen. For maximum adhesion,
it may help to dampen the suction cup.
2.
Pull the lever upwards to apply suction.
3.
Adjust the angle and position of the unit so that you have a clear view
of the screen when driving.
4.
Tighten the joint grip to lock in position.
11
On the dashboard
ROAD ANGEL Vantage is also supplied with a plastic disk, backed with an
adhesive pad, allowing you to mount the unit directly on the dashboard.
This option is not suitable for all vehicles: ensure that your ROAD ANGEL
Vantage is not located close to any heater vents.
1.
Using the supplied wipe, clean the area of your dashboard where you
want to attach the mounting disk. Allow the area to dry.
2.
Peel the backing from the disk’s adhesive pad.
3.
Press the disk firmly onto the dashboard.
4.
Leave the disk for 24 hours so the adhesive can set properly.
5.
Press the suction cup onto the disk. For maximum adhesion, it may
help to dampen the suction cup.
6.
Press the lever downwards to apply suction.
7.
Adjust the angle and position of the unit so that you have a clear view
of the screen when driving.
8.
Tighten the joint grip to lock in position.