Road Angel vantage Product Manual & User Manual - Customising Your
18
6.
Customising your
ROAD ANGEL Vantage
You can change the way ROAD ANGEL Vantage works by adjusting its
menu settings. During normal operation, click on the MENU button on the
left side of the screen. This is not available during an alert.
Alerts
Enable or disable optional alert types.
Audio
Choose how ROAD ANGEL Vantage uses audio
prompts to alert you to road dangers.
Distances
Set the distance at which ROAD ANGEL Vantage
commences its alerts.
Display
Adjust display settings: screen contrast and
colours, speed units and time setting.
Unit Data
View technical information about your ROAD
ANGEL Vantage: its serial number, firmware
version, subscription expiry date and the date of
the most recent database update.
Reset
Restore the factory default settings.
After several seconds of inactivity on a menu screen, the display will return
to normal mode.
19
Alerts
Settings in the Alerts menu determine how ROAD ANGEL Vantage warns
you about road hazards.
Property
Details
Options
(factory setting in
bold)
Blackspots
Switch Blackspot alerts on or off.
Off
…
On
Camera Vans
Switch mobile van alerts on or off.
Off
…
On
Congestion
Zones
Switch Congestion zone entry warnings on or
off.
Off
…
On
Fatigue Alerts
Switch the fatigue timer alert on or off.
Off
…
On
School Zones
Switch School alerts on or off.
Off
…
On
Overspeed
Alerts
Set your own maximum speed: the unit will
alert you if you exceed it.
Off
…
25 – 70
NOTE. If a setting is switched ON, a Green bar indicator will display at the
bottom of the appropriate icon - as shown in the above illustration. If the
setting is switched off, the bar will display as grey.