RoadEyes recneo User Manual - page 24
22
Machine will use the setting value with new player version for
recording after firmware updating completed. When setting is
completed, the player will close automatically.
7. Remove memory card from USB device from PC.
8. Power-off first, then put the memory into Vehicle video recorder
slot, connect TV-out cable, if it doesn’t have TV-Out function,
please verify by recording light indicator on machine.
9. Please do not power-off during updated. Interrupt the update may
cause the machine not work properly, and need to repair by factory
(it needs around one minute to process the firmware updated,
please check the light indicator or screen is normal or not after one
minute), Use as following ways to process the firmware updated.
From the PC:
(i). Put the power cable into USB slot on PC, and the machine will
start the firmware update automatically.
During the firmware update, It will remain in booting screen.
Caution! Powering off the machine during firmware upgrading
may cause major malfunction.