RoadEyes recneo User Manual - page 25
23
After firmware update, please reboot the Machine manually to
complete the update.
P.S after finished updated, When turn on the vehicle video
recorder, it will appear firmware version number
, then enter the live recording screen
(remark: version number will be changed of each firmware
updated.)
From vehicle:
(ii). Put the power cable into USB slot on PC, and the machine will
start the firmware update automatically.
During the firmware update, It will remain in booting screen.
Caution! Powering off the machine during firmware upgrading
may cause major malfunction. Start vehicle engine, wait until the
power steadily, then plug-in the power to vehicle video recorder,
please do not stop engine during updating. t will remain in
following screens. Caution! Powering off the machine during
firmware upgrading may cause major malfunction.
After firmware update, please reboot the Machine manually to
complete the update.
P.S after finished updated, when turn on the vehicle video recorder, it
will appear firmware version number
, then enter
the live recording screen (remark: version number will be changed of
each firmware updated.)
10. After finished, it will enter recording status, it can be used normally.