Roadeyescams recduo User Manual - G. Start / Stop Recording
10
G. Start / Stop Recording
When power on the device, the screen will show a welcome message for the device
starts if connected to TV-Out. The firmware version of the device will displayed
before LIVE view of recording starts.
1. Power on / Start Recording
The device can be started completely after power on for one minute. When the
device is started on programming, the green indicator light is flicker before GPS
positioning completed. After one minute, the red indicator light will be kept
flicker until
show n on right side of LIVE view; the device starts
recording now.
Definition of Indicator
●
Force record button: good for using at night
●
Red indicator of REC:
Stable flicker of red indicator: On recording
Fast flicker of red indicator: Force recording
●
Green indicator of GPS positioning:
Flicker of green indicator: GPS 3D positioning
Steady of green indicator: GPS 3D positioning accomplished.
2. Power Off / Stop Recording
Power off and enter playback page to stop recording.
Power off and then remove the memory card to read the recording file in
computer.
Force Recording Button
IR LED
Recording Indicator
GPS Indicator