S-Cam Sorell SF3000 User Manual - page 18
33
Using MENU
32
CONTROL
●PROGRAM
: Allows you to listen to the selected tracks only.
• To perform track programming:
Press and hold the EQ button to enter
Navigation mode.
After selecting a desired track with the jog
key, press the EQ button briefly to save it.
• To play programmed tracks:
Go to MENU
➝ CONTROL ➝ PROGRAM by
pressing and holding the jog key and then the
PROGRAM list is displayed.
Select a track to begin play with and push the
jog key in the
direction to play tracks in
the programmed order.
(See page 22.)
●RECORDING
: Adjust the recording quality of external
input, FM radio and voice recording.
■ BITRATE
: Specify the recording quality that you want.
A low bit rate decreases file size but yields poorer
sound quality. A high bit rate yields better sound
quality but increases the file size, shortening the
max. recording time.
■ AUTO SYNC
: This function automatically detects when there
is no incoming signal during encoding
(recording) and saves the input in separate
files. (Signals following about 3 seconds of
silence are saved as separate files.).
➤
➤
➤
➤
➤
CONTROL
■ MIC VAD
: During voice-recording, stops recording when there
is no signal.
●SLEEP TIME
: Specify the time after which the player
automatically powers off while playing.
■ SET TIMER
: Specify the desired time (0-60 minutes).
■ TIMER
: Display the remaining timer time.
●STUDY KEY
: Set the time interval that is skipped when
the jog key is pushed in the
or
direction.
This function allows you to skip the specified
time interval by pushing the jog key in the
or direction, which can be useful
when used with a language study file that
has a long recording time.
※Set it to 00 to disable the function.
●PLAY SPEED
: Specify the desired play speed.
Press “-” to decrease and “+” to increase
the play speed. 100% (00) represents
normal play speed.
➤
➤
➤
➤
➤
➤
➤
➤
Select
M
o
v
e
Select
M
o
v
e