S.E.M. Santos Z-7788 User manual - Digital Clock
E-5
DIGITAL CLOCK
HOW TO SET THE “WAKE-UP” TIMER
1. On standby, press and hold the Timer key on the remote control for more than 2 seconds
to start timer setting mode. The wake up source will fl ash on the display (for example:
disc or USB)
2.
Press or keys on remote control to select the source for timer:
DISC
FUNCTION
TUNER AM
FUNCTION
iPod
FUNCTION
CARD
FUNCTION
USB
FUNCTION
TUNER FM
FUNCTION
*The unit LCD display will show “disc” for sources CD-audio, CD-MP3 and DVD.
3. Press Timer on the remote control to confi rm the setting.
4. Repeat Step 2 and Step 3 to set volume and the timer on or off.
The timer is now fully programmed and the unit will automatically switch “on” (& “off”)
at the set times, as long as the timer function is “active”
- Press the Timer key on the remote control to turn the timer on/off setting. The “timer”
icon will appear on the display if time is “on”.
*Note:
- The timer-off function will not be activated if the start and stop time are the same.
- During timer setting, if no button is pressed within approx. 10 seconds, the system will exit the time setting
mode automatically.
5. Automatic power of sleep function
The set has a special sleep timer function which can automatically switch off the unit.
This is useful for sleeping to music at night.
Press
Sleep to set the sleep timer as follow:
90
MINS
80
MINS
70
MINS
60
MINS
50
MINS
40
MINS
30
MINS
20
MINS
10
MINS
SLEEP OFF
While sleep mode is activated, you can check the remaining time
Press
Sleep key on the remote control to view the remaining time.
- “XXXMIN” will be displayed. “XXX” is the remaining time in minutes.
To deactivate the sleep timer
-
Press
Sleep repeatedly during sleep time checking until sleep icon is off, or press on/
standby key.
6. Alarm function (beep-beep alarm)
The set has an alarm function, which can be set as follows:
- During standby, press and hold the Alarm key (on the remote control), the display
will show on hh:mm , and you will see “hh” is fl ashing.
-
Use
the or keys to change the desired setting.
Press
Alarm key to confi rm selection.
- Repeat above to steps to confi rm the minutes setting and activate alarm.
*Note:
During alarm settings, if no button is pressed within approx. 10 Seconds, the system will exit the timer
setting mode automatically.
Press the alarm key repeatedly to shuffl e between activating and Deactivating the alarm.