Swim-n-dunk & commercial basketball games corporate headquarters western sales and manufacturing plant p.O. Box 400 •••• 1017 sw berg parkway canby, oregon 97013 (503) 266-2231 •••• (503) 266-4334 www.Srsmith.Com 06-647 s.R. Smith, llc 2004 jun 09 assembly and installation instructions.
2 introduction the commercial and swim-n-dunk basketball games are designed for use on in-ground pools in shallow water depth areas. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. **important** check entire boxes and ...
3 commercial and swim-n-dunk parts list note: two in-deck plastic anchors (as-100p) for concrete decks are required to install the game. Assembly instructions 1. Begin by locating the basketball posts and the cross brace as shown in figure 1. This is simpler if the vertical posts are already inserte...
4 figure 4 figure 5 (20) (11) (13) (2) (12) (11) (17).
5 4. Attach the rim to the front of the backboard and to the post assembly on the opposite side of the backboard with the 5/16” bolts, 1” od flat washers, nylon washer, 3/8” flanged bushing and nuts as shown in figures 4 and 5. Note: remove the protective film from the front face of the backboard be...
