2 introduction the commercial and swim-n-dunk basketball games are designed for use on in-ground pools in shallow water depth areas. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. **important** check entire boxes and ...
3 commercial and swim-n-dunk parts list note: two in-deck plastic anchors (as-100p) for concrete decks are required to install the game. Assembly instructions 1. Begin by locating the basketball posts and the cross brace as shown in figure 1. Attach the cross brace to the posts with the stainless st...
4 4. Install the net to the rim. Refer to page 3 of the huffy sports rim owners manual for the proper installation procedures. 5. Attach the rim to the front of the backboard and to the post assembly on the opposite side of the backboard with the 5/16” bolts, flat washers and nuts as shown in figure...