Saab 400 101 754 Installation instructions manual - page 3
45 18 510 3
Saab 900 M94-, Saab 9-3
18 Remove the lower dashboard panel on the driv-
er’s side.
19 Remove the screws securing the relay holder
and bend it to one side.
20 Lay the wiring harness for the driver’s loud-
speaker in place under the dashboard.
21 Insert the wiring harness through the grommet
in the drivers door and connect the leads as fol-
lows:
YE/WH - pin 19
OG/WH - pin 20
22 Connect the leads to the blue connector H33-3
as follows:
23 Secure the wiring harness with cable ties.
24 Remove the glove box.
25 Remove the side panel on the passenger side of
the centre console.
26 Insert the wiring harness through the grommet
in the passenger door and connect the leads as
follows:
GY - pin 19
BN/RD - pin 20
27 Secure the wiring harness to the dashboard
member with a cable tie.
900
9-3
YE/WH - pin 10
OG/WH - pin 25
OG/WH - pin 11
YE/WH - pin 26
GY - pin 30
GY - pin 28
BN/RD - pin 31
BN/RD - pin 29
24
24
18
D930A054