Saab 400 101 754 Installation instructions manual - page 4
4 45 18 510
Saab 900 M94-, Saab 9-3
28 Put the amplifier bracket in place and screw it
tight.
29 Put the amplifier in place and tighten the screws
securing it to the bracket and the support.
30 Put the amplifier wiring harness in place under
the dashboard.
31 Plug in the wiring harness to the amplifier.
32 Plug in the DIN cable to the amplifier.
33 Lift out the radio from the dashboard and plug in
the DIN cable.
34 Connect the ground cable to grounding point
G34P on the A-pillar on the passenger side.
35 Connect the leads to the blue connector H33-3
as follows:
YE/WH - pin 10
OG/WH - pin 11
GY - pin 30
BN/RD - pin 31
36 Connect the power supply lead to fuse 25 in the
fuse holder.
37 Secure the wiring harness with cable ties.
38 Refit the side panel to the centre console.
39 Refit the glove box.
40 Refit the lower dashboard panel on the driver’s
side.
41 Refit the cover on the door pull.
42 Refit the cover by the door mirror.
43 Put the opening handle in place and screw it
tight.
44 Put the cover on the opening handle in place.
45 Put the tailgate release button in place.
31
29
29
32
34
28
G34 S/P
D930A052