1. DL manuals
  2. SAB
  3. TV Receiver
  4. 3606
  5. User Manual

SAB 3606 User Manual

Manual is about: HD

Summary of 3606

  • Page 1

    1 contents 1. Safety ..................................................................................................................................................... 3 2. Introduction ..................................................................................................................

  • Page 2

    2 12.1 i nformation ...................................................................................................................................... 25 12.2 d efault s etting ..........................................................................................................................

  • Page 3: 1. Safety

    3 1. Safety this hd receiver has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. Mains supply: 100 - 240v ac 50/60hz overloading: do not overload wall outlet, extension cord or adapter as this may result in fire or electric sho...

  • Page 4: 3. Features

    4 3. Features  mpeg-fully dvb-s / dvb-s2 (h.264) hd compliant  6000 channels (tv and radio) programmable  multilingual menu text support  channel switching time less than 1 second  channel list editing  favorite channel list editing  true-color on-screen display (osd)  full picture in graphi...

  • Page 5: 4. Remote Control

    5 4. Remote control you can power on/off the receiver, operate on screen menu, and use a variety of hot key function. Power to switch your receiver on from standby or standby to on. Mute used to enable or disable the audio numeric keys used to select channels or enter programming parameters (tv / ra...

  • Page 6

    6 usb to remove the usb hard disk safely. Tms(time shift) press this button to display time shift info bar. Play to play the mp3, jpeg, or record files. Stop to stop the time shift, recording, or mp3/jpeg player. Pause used to select the freeze function. Press once to freeze the screen picture. Fb t...

  • Page 7: 5. Front Panel

    7 5. Front panel power key: to switch the receiver power on/stand by menu key：to enter into the main menu. Key: to adjust volume level, or to move cursor left or right in the menu. ^, v key : to change channels, or to move cursor up or down in the menu ok key: to see tv/radio channel list, or to con...

  • Page 8: 7. Connecting Your System

    8 aerial out: this enables the connection of another receiver. (optional) aerial in : this port is to connect the coaxial cable from terrestrial antenna. (optional) 7. Connecting your system there are four ways to connect the receiver to your existing tv system. We recommend using one of the followi...

  • Page 9

    9 connect an rca stereo cable from the audio l, r jacks on the back of the receiver to the line, aux, spare or extra input jacks on your hi-fi system. 7.1 tv with motorized system (diseqc 1.2) connect one end of your coaxial cable to the lnb in connector on the receiver and the other end to the rec ...

  • Page 10: 8. Basic Operations

    10 8. Basic operations 8.1 turn on stb first, press the [device’s main power] to turn on the unit. When the stb is first used, there will play the first channel from the default channel list. If the stb is not first used, stb will play the same channel as last time before turning off. ? Frequently a...

  • Page 11

    11 4 press [exit] key to exit the current window. ? Frequently asked question q: why the screen displays “no favorite channel”, after pressing [favorite] key? A: it is because that you haven’t set any channels as “favorite channel”. Please refer to favorite . 8.10 audio 1 in full screen, press [audi...

  • Page 12

    12 4 press [yellow] key in epg menu can set one record timer or go to timer list menu. 5 in epg menu, when you select one event by high light item, you can set this event to record timer list directly by press [rec] button. 6 in epg menu, press [exit] to close epg screen. 8.13 tv/radio in tv mode, p...

  • Page 13

    13 5 press [blue] key can open the “sort” window like below. There are five kinds of sorting ways. You can press [channel up/channel down] key to move highlight and press [ok] key to confirm you selection. 6 the five kinds of sorting way are: default: sorting by scanning result. Fta/$: sort channel ...

  • Page 14: 9. Service

    14 3 in “x2 ~ x16” image, using [up/ down/ up/ down] keys to move the image center area you want to see. 4 in zoom mode, press [exit] to close “zoom” window. 8.21 tv/rcv 1 press [tv/rcv] key can switch between tv mode and stb mode 8.22 menu  press [menu] key can open the menu, exit the current menu...

  • Page 15

    15 5. Press color key can implement the corresponding function in “organizing services”. Groups 1 press [red] key can open the “ groups ” window like above 2 you can press [up/down] key to move highlight and press [ok] key to select group. 3 press [menu] key to close “ groups ” list. Options 1. Pres...

  • Page 16

    16 delete a) select the channels which you want to edit in channel list by press [ok] key or other select mode. B) then press [right] key to move the high light to right toolbar. C) select delete icon by press [channel up/channel down] key and [ok] key. D) delete the channel by press [ok] key. Skip ...

  • Page 17: 10.   Installation

    17 10. Installation 1 press [left/right] key to select menu pages among service, installation, preference, system, conditional access, internet,usb and game. 2 press [ok] key to enter the “installation”. If menu lock is “on”, it will display an dialogue for user to key in password. The default passw...

  • Page 18

    18 22k you can use [volume up/ volume down] key to switch “on / off”. When this item is switched to “on”, receiver will receive tv and radio input signal from 22k port. If the item is switched to “off”, the receiver will receive all signal from 0k port. ! Notice when you choose lnb type “universal”,...

  • Page 19

    19 single scan 1 press [red] key, it will show up a dialog to ask you scan mode (means you want to scan all channels or only scan free channels), program type (means you want to scan all channels or only scan tv/radio channels), scan type (means preset scan, that is searching the existed tp. Automat...

  • Page 20: 11. Preference

    20 “satellite guide” is use for user to enter local longitude; local latitude and satellite longitude. By the evaluation from the receiver evaluate the antenna azimuth and antenna elevation; user can follow this guidance to adjust antenna. 1 you can use number keys to input parameters in “local long...

  • Page 21

    21 parental lock,l time setting, timer, a/v control, miscellaneous settingl osd setting. Press[ok]key to enter the selected item. 11.1 language when you enter to “language” menu, you will see the screen like below: 1 language: press [volume up/ volume down] key to select menu languages, the selectio...

  • Page 22

    22 have to key in password, set “no” means unlock. 3 channel lock determining that when user wish to play the lock channels, whether have to input the password or not. If the setting is “yes”, play the channels with lock mark will show up a dialogue on the screen and ask for the password. If the set...

  • Page 23

    23 raw data, if hdmi tv can decode lpcm only, system will just decode ac3 or lpcm to be lpcm and then output.  press [exit] key to draw back from “tv system” menu. 11.4 time setting when you enter to “local time setting” menu, you will see the screen like below:  gmt usage: this item is use for op...

  • Page 24

    24 iii. On time: use number keys to input your wakeup time. Once the time’s up, no matter what the system is in standby mode or in playing mode, the system will automatically switch to the channel you want and start to play. Iv. Duration: after you set a time for “duration” item, once the time’s up,...

  • Page 25: 12. System

    25 11.7 osd setting when you enter the “osd setting” menu, you will see a screen like below: 1 osd timeout: when you switch channels in full screen, there will show up some information about current channel on the lower of the screen. And regarding to the duration of these information show up on the...

  • Page 26

    26 12.2 default setting 12.2.1 backup restore: when you press [ok] key in the “backup restore” item, it will pop a dialogue ask this operation will load to backup default . If you select “yes”, all the channels user added will be deleted. 12.2.2 factory reset: when you press [ok] key in the “ factor...

  • Page 27

    27 connect master receiver to slave receiver via serial interface. Enter “software upgrade” menu in master receiver and press[volume up/volume down]keys to switch upgrade mode： all sw+bootloader /all sw+channel list/software(no channel list)/channel list. 2 moving highlight to “start” on master reec...

  • Page 28: 13. Conditional Access

    28 in this menu you can select the upgrade mode among software(no channel list), channel list, all sw+bootloader and all sw+channel list, and you can select the appropriate upgrade file on "upgrade file" item. After you select the "upgrade mode" and "upgrade file", press ' ok ' button on "start" ite...

  • Page 29: 14. Usb

    29 13.2 common interface we provide two ci slots (option, some model only has one slot) for user to use. Using different cam & cards provided by different cas operator, user can view many type or scrambled channels. We provide this menu to display the detail information of the cam & cards inserted i...

  • Page 30

    30 or press [green] key to lock the file, or press [yellow] key to delete the file. You can press [1] key to adjust the volume while you preview the record file on top of the right corner .And you can press to enable or disable the audio. 14.1.2 mp3 files in this menu you can select the mp3 file to ...

  • Page 31

    31 [white] key: to setting the repeat mode of the mp3 player. After begin to play mp3, it will show the mp3 play window. Press “pause” button to pause.. Press “play” button to play. Press “stop” button to stop and time return to 00:00. Press “prev” button to jump to the beginning of file list if pla...

  • Page 32

    32 [0] key: to sort the file list by press [0] button. [red] key: show file play list. There will display “the type of playlist do not exist” if there are no any file. Image view operation please see the below image operation menu if image function is selected.  red key: move the selected file by p...

  • Page 33

    33 14.1.4video youcan see the video files in this menu, it can support .Mpeg and .Ts format file.And press [play] key, you can preview the video at the top right corner. You can press [1] key to adjust the volume while you preview the video file,press [0]key to sort the file list. And press to enabl...

  • Page 34

    34 note: if you format the hdd, all the files include mp3, jpeg and the record files will be deleted from the hdd. If you want change the path for recording files and timeshift files, press “blue” button to enter the dvr set menu, then press ok button to set the path on current select disc. 14.3 pvr...

  • Page 35: 15. Internet

    35 15. Internet if you enter to the " internet " menu, you will see the picture like the below: you can get a new software from the network via lan port. 15.1 network local setting 1. Select your network type as wired or wireless, if you select wireless, can configuring wi-fi (wireless) as the follo...

  • Page 36

    36 1. When connected to the internet, receiver can manually or automatically make software update from file from server. Note: this function depends on connection with external server. In case of no software on server, this function will not work. 15.3 ftp upgrade when connected to the internet, rec...

  • Page 37: 16. Game

    37  green key to add new city.Use this menu.You can add 5 cities at most.  yellow key to delete current city.  blue key to switch other temperature mode. 15.6 rss reader in this menu you can see the news  red key to update the news to the newest.  green key to add new channels,you can input a n...

  • Page 38: 17. New Features

    38 16.1 tetris a) moving highlight to “setup” and press [volume up/volume down] key to select the game level (speed). B) moving highlight to “start” and press [ok] key to start the game. C) moving highlight to [cancel]keys and press [ok]key to draw back from the game. D) start on the game:  [volume...

  • Page 39

    39 1 you can press " " button to pause the video, and can save the picture to flash by press " p+ " button when the video is paused. 2 you can press " " or " " button to fast backward or fast forward. 3 you can press " " or " " button to slow backward or slow forward. 4 press “left" or "right" butto...

  • Page 40: 18. Trouble Shooting

    40 18. Trouble shooting if you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric sho...

  • Page 41: 19. Specifications

    41 19. Specifications system resources main processor 400m hz based cpu flash memory 64m bits ddr sdram 1024mbits tuner/front-end(optional) tuner type dvb-s / dvb-s2 input connector f-type, connector, female loop through f-type, connector, female signal level -65 to -25 dbm vertical: +13v horizontal...

  • Page 42

    42 s/pdif optical(optional) and coaxial, digital audio or dolby digital bit stream output transfer rate 115.2kbps rs-232c 9 pin d-sub type usb two usb 2.0 slot compatible ver1.2 hdmi type a etherent rj45 physical specification size[w*h*d] 220mm x169mm x 46(h)mm 300mm x 231mm x64mm net weight 1.0kg o...