1 contents 1. Safety ..................................................................................................................................................... 3 2. Introduction ..................................................................................................................
2 11. Conditional access ....................................................................................................................... 29 11.1 ca s etting ..........................................................................................................................................
3 1. Safety this hd receiver has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. Mains supply: external dc 12v adapter overloading: do not overload wall outlet, extension cord or adapter as this may result in fire or electric s...
4 if you have any difficulties concerning the operation of your hd receiver, please refer to the relevant section of this manual, including the ‘troubleshooting’. This manual will provide you with useful information on using the hd receiver. 3. Features mpeg-fully dvb-s / dvb-s2 (h.264) hd complia...
5 4. Remote control you can power on/off the receiver, operate on screen menu, and use a variety of hot key function. Power to switch your receiver on from standby or standby to on. Mute used to enable or disable the audio numeric keys used to select channels or enter programming parameters tv / rad...
6 tms(time shift) press this button to display time shift info bar. Play to play the mp3, jpeg, or record files. Stop to stop the time shift, recording, or mp3/jpeg player. Pause used to select the freeze function. Press once to freeze the screen picture. Fb to start fast backward function. Ff to st...
7 1. If you have a high definition television set, you should use a hdmi cable for best result, plug one end of the cable into the hdmi socket on the receiver, and the other end into the matching socket on your television. In this case, you do not have to make audio connections because the hdmi conn...
8 connect one end of the ethernet cable to the product and the other end to the lan router. 2.Connecting to the wi-fi (wireless lan): you can connect the network via the wi-fi access point or dsl/cable modem. A. Plug in the wireless usb dongle to the usb port.(separate purchase required) b. Set the ...
9 7. Basic operations 7.1 turn on stb first, connect to an external 12v adapter to turn on the unit. When the stb is first used, there will play the first channel from the default channel list. If the stb is not first used, stb will play the same channel as last time before turning off. ? Frequently...
10 [p-/p+] keys can implement the “page up/page down” function 4 press [exit] key to exit the current window. ? Frequently asked question q: why the screen displays “no favorite channel”, after pressing [fav] key? A: it is because that you haven’t set any channels as “favorite channel”. Please refer...
11 4 press [yellow] key in epg menu can set one record timer or go to timer list menu. 5 in epg menu, when you select one event by high light item, you can set this event to record timer list directly by press [rec] button. 6 in epg menu, press [exit] to close epg screen. 7.13 tv/radio in tv mode, p...
12 3 press [green] key to display details information for epg now. 4 press [yellow] key you can change the current channel’s property, such as fav/ lock/ skip/ delete/ rename. 5 press [blue] key can open the “sort” window like below. There are five kinds of sorting ways. You can press [channel up/ch...
13 7.16 page up/page down in channel list, press [page+/page-] key can page up and page down the channel list. 7.17 text 1 press [ttx] key in full screen, you can open teletext page on the channel which has teletext information. 2 if the channel has no teletext information, it will show “no teletext...
14 8. Service when you press [menu] key to enter menu, there will display the picture like below: press [left/right] key you can select the submenu of organizing services and organizing favourites. press [ok] key to enter the “organizing service”. If menu lock is “on”, it will display an dialogu...
15 2. You can press [up/down] key to move highlight and press [ok] key to confirm the select mode. 3. Press [menu] key to close “options” list. Move 1. Select the channels which you want to edit in channel list by press [ok] key or other select mode. 2. Then press [right] key to move the high light ...
16 1. Press[find] key can open the “find” window like above. You can press[up/down/ left/right ]key to move highlight and press [ok] key to input the selected symbol or letter into the dialogue. 2. After input each character, the program list on the left will search the channel according your input,...
17 2 press [up/ down] key to select satellite. Press [page] key to page up or page down. Lnb type in this item, press[ left/right ]key can switch among “standard”, “user” and “universal” , ”unicable” mode. Diseqc diseqc: you can press [ok] and [up/ down] key to switch options. There are several opti...
18 1 in “satellite” item, press[ left/right ]key to switch satellite that you want to scan or press[ok]key to enter satellite list for selection. 2 in “tp index” item, you not only can use [ left/right ]key to select transponder but also can use[add] and [delete]functions. when you press[green] ke...
19 9.2 fastscan satellite in this menu, you can search the channels fast by select the provider and press ok button on start search item. 9.3 auto installation “auto installation” is a very new and convenient function. It will automatically detect all dishes connecting to this machine and scan the a...
20 in “system” menu: press[ left/right ]key to select menu items among language, a/v control,ethernet setting,time setting, timer, parental control,miscellaneous settingls,software upgrad, default setting, hdmi certificatio ,information. Press[ok]key to enter the selected item. 10.1 language when yo...
21 display mode is for switching the system outputting video resolution. Move highlight on it and press left or right key, it will switch video resolution circularly by the sequence "auto", "by native tv","480p", "576p", "720p_50","720p_60,"1080i_50"," 1080i_60" ," 1080p_50" and" 1080p_60"this effec...
22 3.Press [ok] button on connect item to start connecting. A) in this menu you may assign a dynamic ip address to the digital receiver. To do so, select the dhcp on. B) if you have a static ip address, unselect the dhcp enable, then the ip address, subnet mask, gateway and dns options become enable...
23 gprs 1. Select gprs network on link type item 2. Inset the gprs sim card 3. Press [red] key into the gprs setting menu. 4.In this menu you can press [ok] key to select gprs setting. 10.4 time setting when you enter to “local time setting” menu, you will see the screen like below: gmt usage: t...
24 10.5 timer press [ok] key to open timer menu. current time information will display on the first column; if the current time is incorrect, please modify the time information in “time” item. timer number: you can press [left/right] keys to set timer number, and there are 8 timers in total. t...
25 ix. Standby after finish: you can press [left/right] to control the system is in standby mode or in playing mode after the record stopped. X. Extend record time : press [left/right] button or input the number using numeric keys to set the extend record time. It is used to add time at beginning an...
26 turn on the subtitle manually by press [subtitle] key. 2 auto power down: you can press[left/right] key to select the time or “off”, if you select time, duration this time if no any operation on receiver, it will go to standby mode. 3 deep standby: if set to “on”, press power key receiver will be...
27 this function depends on connection with external server. In case of no software on server, this function will not work. 10.8.4 ftp upgrade when connected to the internet, receiver can make software update from file from ftp server. Note: this function depends on connection with external server. ...
28 this function can upgrade the software through signal lines from the satellite 1 select the satellite and tp or input the tp value and download pid, these parameters you can get from your provider. 2 then move the highlight to the start button and press [ok] button to start upgrade. 10.9 default ...
29 when you press [ok] key in the “backup save” item,there will show a message to inquiry you"do you want to set current database as default data?".If you select “ok” option,it will to set current data as default data 10.10 information 1 when you enter to “information” menu, you will see a screen li...
30 you can press [left/right] key to set the message display time. 12. Media if you enter to the "media" menu, you will see the picture like the below: note: if no usb hard disk insert to the receiver this menu is not available. 12.1 record in this menu you can playback the record files, and you can...
31 right corner.If you want to watch the video in full screen you can press [ok] button. You can press [1] key to adjust the volume while you preview the video file,press [0]key to sort the file list. And press to enable or disable the audio yellow key to edit the files or folders. Include rename,...
32 red key to rename the file or folder. green key to copy the file or folder to other folder. yellow key to delete the file or folder from the disk. blue key to create a new folder in the disk. Press [exit] key to draw back to ‘edit’ menu [white] key: to setting the repeat mode of the mp3 p...
33 you can preview the picture at the top right corner if the scroll bar is on the picture files (jpg, bmp), and show the logo when at mp3 file. Move scroll bar when press up/down key, page up or down by page key. Go into sub-directory when press ok key in the file directory, play the selected file ...
34 to preview the images. Press this key you can see the picture like below. 12.6 software in this menu you can press [left/right] button to select the usb disk that you want to visit. 1. Select you want to upgrade file, press[green] key select the upgrade mode among software(no channel list), chann...
35 press “yellow” button to enter the hdd information menu like the below picture,you can see details information about the hdd usb speed test press “blue” button to enter the usb speed test menu like the below picture,you can see the standard speed and your usb harddisk speed, according this inform...
36 1.Press [up/down] key to move highlight. 2.Press [ok] key on one item, it will play pertinent video. The video will show on top left corner. Press [ok] again, it only shows video in the centre of your screen. Now press [zoom] key, the video will play in full screen. 3.Press [vol+/vol-] to control...
37 press ok button to see the detail infomation.Like the below. 13.3 weather forecast in this menu you can see the weather forecast, press [green] key to add city. red key to update the weather forecast to the newest. green key to add new city.Use this menu.You can add 5 cities at most. yellow...
38 13.5 ftp when connected to the internet, receiver can download some files, such as software, mp3 or image files from ftp server. Note: this function depends on connection with external server. In case of no any files on server, this function will not work. 13.6 titan online in this memu you can c...
39 “ready to receive data” state, at last run the “bubbleupnp” app on android device, and select the receiver as the renderer by android device media files sharing. 13.9 big2small with this function you can watch the tv channels on android device from receiver (big2small server). Firstly download an...
40 15. Epg press ‘ok’ button to this menu you can see the picture like the below,you can select epg more and schedule.This function is same as epg. 16. New features equalizer when you listen the radio program, it will display the music spectrum graphic on tv screen..
41 17. Trouble shooting if you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric sho...
42 18. Specifications system resources main processor 594mhz based cpu flash memory 64 mbits ddr sdram 1024 mbits tuner/front-end(optional) tuner type dvb-s / dvb-s2 input connector f-type, connector, female signal level -65 to -25 dbm lnb power & polarization vertical: +13v horizontal: +18v current...
43 rs-232c(3.5mm earphone jack) transfer rate 115.2kbps 9 pin d-sub type lan 100m usb two usb 2.0 slot compatible hdmi ver1.3 type a physical specification size[w*h*d] 115x75x21mm net weight 0.11kg operation temperature 0℃~+45℃ storage temperature -10℃~+70℃ storage humidity 5%~95% rh (non-condensing...