Saber Edge LM-21SBS Operator's manual - Safety and
6
Safety and
Instructional Decals
Important: All damaged or illegible safety and
instruction decals should be replaced.
They are located near areas of potential danger.
Safety Warning Label Danger Decal
1. Bladecontrolbar
2. TractionClutchBar
3. Knob(4)
4. GrassCatcher
5. CuttingHeightLever
6. handle
Product Overview
Setup
Important: Remove and discard the protective
plastic sheet that covers the engine.
Installing the Handle
Important:Whenfoldingorunfoldinghandlebecareful
nottopinchordamagethecables.Damagedcableswill
createunsafeoperatingconditions
If thecable[s]isdamageddonotusethemachineandcon-
tactanAuthorizedServiceDealer
• Remove top handle and spin handle around and
lay on the ground flat with blade control bar
facing upward.
• Rotate lower handle to the operating position.
Align the lower handle hole with lower handle
bracket and insert two 5/16th x 1 inch carriage
bolts on both sides using 5/16th flat washer and
nut and tighten.
• Securely tighten all four lower handle bolts
• Install upper handle to lower handle using 5/16th
x 2 inch carriage bolts and handle knobs. Making
sure cable is on top of the handle.
• Snap on the two cable clamps
to the handle one on the top
handle and other on lower
handle securing the cable to
the handle.
1. Warning-Readownersmanual.
2. Thrownobjecthazard-keepbystandersasafedistancefromthe
machine.
3. Disconnectthespark-plugwireandreadtheinstructionsbefore
servicingorperformingmaintenance.
4. Gasolineishighlyflammable.Filloilandgasolinewithcaution
outdoors.Nevernearopenflameorsparks.
5. Cutting/dismembermenthazardofhandorfoot,frommower
blade-stayawayfrommovingpartsandkeepallguardsand
shieldsinplace.
6. Weareye,earandheadprotectionwhenoperatingunit.
7. Cutting/dismembermenthazardofhandorfoot,mower
blade-donotmowupanddownslopes,onlymowacross;stop
themowerandengine,pickupdebrisbeforeoperating;look
behindanddownwhenreversing
1 2 3 4 5 6 7