SABINE Smart Spectrum SWM4000 Series Operating Manual - page 12
12
Sabine SWM4000 Smart Spectrum
®
Wireless
© 2011 Sabine
, Inc.
Appendix B - Frequencies and Groups
FREQUENCY BAND SELECTION
Most countries closely regulate radio frequency devices to limit RF (radio frequency) interference. Many countries are in the
process of changing their regulations in order to accomodate requirements for DTV braodcasts and smart phones. SWM4000
systems are available in several frequency ranges. Contact your local retailer to determine the bands that are suitable in your
area. Sabine is making new frequency bands available as the regulations evolve. The most current information can be found at
www.Sabine.com.
The following bands are available at the time this manual was printed:
902-928 MHz - For the Americas and the Pacific Rim (These frequencies are expected to remain license free and relatively free of
interference for the foreseable future.)
710-740 MHz - For use in Europe.
606-630 MHz - For use in the UK.
SWM4000 systems typically provide predefined frequency groups and channels. All microphones in a system should be set to in-
dividual channels within a sinlge group to reduce the chance of interference. DO NOT SET TWO TRANSMITTERS TO THE SAME
GROUP AND CHANNEL.
Up to 8 individual transmitter/receiver systems may be used simultaniously in the same venue. It is possible to operate up to 20
systems simultaneously.
Appendix C - Rack-Mounting SW40-RH Receivers