SABINE STX-1100 Manual - Automatic Battery Monitoring
5
How To Use The Special Features
Automatic Battery Monitoring
The STX1100 monitors the voltage of its battery automatically. If the
voltage gets low, the "In Tune" indicator light (green) will stop blinking
and the "Flat" (amber) and "Sharp" (red) indicator lights will blink simul-
taneously. The tuner will then tune accurately for about 10 more hours.
Automatic SLEEP MODE Battery Saver
The STX1100 will turn itself off if it does not hear a tone for 15 minutes to
help prevent the battery from discharging unnecessarily. To turn the tuner
back on from sleep mode, simply move the power switch to OFF and
then back ON. Note: A very small amount of current will be drawn from
the battery in sleep mode, so it is best to turn the tuner off with the power
switch.
9-volt DC ADAPTOR
Most 9-volt DC adaptors can be used with the STX1100. If the adaptor
has a polarity switch, set the center pin of the DC adaptor jack to nega-
tive (barrel: 2.5mm inside diameter).