SABINE STX-1100 Manual - Music Stand Clips
6
Music Stand Clips
The STX1100 mounts easily to the bed of
a music stand so that you can monitor
your pitch while you play. (See Figure 1.)
If your stand has a sharp or ragged edge,
a strip of tape along the edge will prevent
scratching the top of your tuner.
The clips will easily accommodate a thin
piece of metal like a music stand, but they
will be permanently bent if you try to jam
them over something thicker, such as the
handle of a guitar amp.
NOTE: BENT CLIPS ARE NOT COVERED UNDER WARRANTY.
Automatic Calibration
Most tuners on the market will allow the user to calibrate only a few
Hertz from standard A = 440Hz. They prove to be almost useless if the
user wishes to tune to an instrument that is more than a few Hertz out of
tune. However, the STX1100 can be calibrated to match any instrument
by simply touching a button.
Example: If you wish to tune a guitar so that it will be in tune with a
certain piano, simply play any note on the piano, and wait a moment for
the note to register on the tuner’s display. Then touch the FUNCTION
button on the tuner. Instantly the green IN-TUNE light will go on, indicat-
ing that the tuner now considers the piano to be in perfect tune. Now if
you tune your instrument to the tuner, your instrument will be in tune with
Fig. 1
IN
ST
RU
ME
NT