Saeco 10000206 Operating And Maintenance Manual - Descaling

15

2

3

4

1

5

6

DESCALING

DESCALING

When performing a descaling cycle, it is necessary to be present during the entire process 

(about 40 minutes).

Caution! Do not use vinegar as a descaler.

The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling 

solution. Saeco descaling solution is recommended.

The used solution should be disposed according to the manufacturer instructions and/or regulations in the 

country of use.

Note: before starting a descaling cycle make sure that:

1  a container of adequate size is available;

2  if the “Aqua Prima” fi lter is used, make sure that it has been removed.

When the descaling light is 

fl ashing, a descaling cycle must 

be performed.

Place a large container beneath 

the steam spout.

Empty the tank and refi ll it, 

dissolving the descaling solution 

in a full tank of water.

Press the hot water button.

Turn the knob until the 

position is reached. Dispense 

the descaling solution into the 

container for 15 seconds.

Turn the knob until it is in the 

rest position ( ).