Saeco 10000206 Operating And Maintenance Manual - Installation

7

7

1

2

8

9

3

4

5

6

INSTALLATION

STARTING THE MACHINE

Make sure the power button is not pressed and the machine is turned off. Check the machine features on 

the label on the bottom of the appliance.

Lift the cover of the coffee bean 

hopper.

Remove the water tank.

We recommend installing the 

“Aqua Prima” water fi lter (see 

page 8).

Fill the container with coffee 

beans. Close the cover placing 

it correctly on the hopper.

Fill the tank with fresh drinking 

water up to the MAX level. 

Reinsert the tank.

Firmly push down the power 

button to turn on the machine. 

The machine performs a self-

test.

Insert the plug into the socket 

located in the rear panel of the 

machine and insert the other 

end into a socket with suitable 

current.

Place a container beneath the 

steam spout.

Turn the knob until the 

position is reached.

Press the water button. The 

indicator light turns on.

The machine automatically primes the circuit. If this operation is not completed, proceed manually as described 

from step 7 to 12.