Saeco AMBRA SUP 015VR Operation and maintenance - page 9
English
9
6 - INSTALLATION
Warning
The presence of nearby magnetic fields or electric devices
generating interference may cause malfunctioning in the
electronic control of the machine.
Important
Do not install the machine outdoors and in environments where
water or steam jets are used.
Important
When the temperature is approaching 0°C internal compo-
nents containing water are subject to freezing.
Do not use the machine in such conditions.
To guarantee the correct functioning and durability of the
appliance, follow the indications below:
-
room temperature:
10°C ÷ 40°C
-
maximum humidity :
90%.
-
make sure that the machine has not been tampered with
during transport by verifying the package sealing;
-
verify the machine conditions and model inside the
packaging;
-
verify the content of the accessories envelope enclosed
to the machine (see “6.1 List of supplied accessories”);
-
remove the machine from the original packaging that
should be preserved for future use (e.g. change of lo-
cation);
-
remove all the remaining packaging.
Important
Disposal of packaging should be carried out according to
existing laws and regulations and in line with environmental
considerations.
6.1
List of supplied accessories
•
N. 1 brew group key (ref. 24 - Fig. 1).
•
N. 1 Instruction and Maintenance Manual
6.2
Positioning
For correct functioning of the appliance follow the indica-
tions below:
-
select an even surface
-
select a location that is sufficiently well-lit, clean and
near an easily reachable power source;
-
the distance from the walls must be as shown in Fig.3;
-
the maximum angle of inclination of the supporting
surface must not exceed 2°
6.3
Electric connection
Warning
This operation must be performed by the maintenance techni-
cian.
The machine requires single-phase voltage according to the
value contained in the identification plate (2.4 Machine
identification).
Warning
The socket should be easily accessible to the supply opera-
tor, so that the machine can be easily unplugged when
necessary.
Before connecting the machine check the following points:
-
the line voltage of the socket must correspond to that
indicated on the machine plate;
-
the electrical system must be in line with existing laws
and regulations and must have the load capacity indi-
cated on the plate.
When in doubt, request professional assistance to de-
termine the characteristics of the electrical system.
Warning
The use of extensions and adapters is forbidden.