- DL manuals
- Saeco
- Coffee Maker
- Primea Touch Plus
- Operation And Maintenance Manual
Saeco Primea Touch Plus Operation And Maintenance Manual
Summary of Primea Touch Plus
Page 1
Table of contents operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules for household use only.
Page 2
Important safeguards when using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to person do not immerse cord, plugs...
Page 3
Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the...
Page 4: Table of Contents
2 general information .................................................................................................................................3 machine ..............................................................................................................................................
Page 5
3 the coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk beverages and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty or professio...
Page 6: Machine
4 cappuccinatore maintenance kit c i t compartment for pre- ground coffee brew group coffee grounds drawer socket for power cord open coffee bean hopper button coffee bean hopper cup warming plate main switch service door accessories coffee bean hopper cover drip tray button for raising/lowering the...
Page 7: Installation
5 1 2 3 4 7 6 5 installation attach the female end of the power cord to the machine. Insert the male end into the power outlet. Place a container beneath the hot water spout. Press the button on the coffee hopper to open the cover. Fill the hopper with coffee beans. Close the cover pushing it down c...
Page 8: Installation
6 1 3 press to select the desired language. The machine starts and displays the menu in the selected language. See manual on page 34 to adjust the clock. 5 italiano (ch) language 1/2 français deutsch nederlands english italiano (i) ok 1 select the desired language. Press for the other languages. Pre...
Page 9
7 5 6 9 4 1 3 2 remove the small white fi lter from the tank and store it in a dry place sheltered from dust. Fill the tank with fresh drinking water and reinsert it into the machine. Set the intenza aroma system: a = light water b = medium water (standard) c = hard water for further details see page...
Page 10: Display
8 • to get the desired beverage, press the corresponding symbol on the display. The machine automatically performs all the necessary operations. • to make 2 cups, press the beverage symbol twice. Press twice weak medium strong the intensity of the color on the cup icon (only valid for coffee beverag...
Page 11: Adjustments
9 medium coffee strong coffee mild coffee sbs adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee. Coffee intensitiy sbs – saeco brewing system height adjustable drip tray. To raise the drip tray, press ligh...
Page 12: Beverage Dispensing
10 1 2 3 dispensing coffee, hot water and milk can be interrupted at any time by selecting the "stop ... Dispensing" button. The dispensed milk can reach high temperatures: there is a danger of scalding. Do not touch it with bare hands. Check that all the containers are clean. To do this operation, ...
Page 13
11 1 2 3 4 5 dispensing beverages with ground coffee pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the "beverage programming" chapter on page...
Page 14: Beverage Dispensing
12 2 2 3 4 5 1 1 6 press the hot water icon once. Hot water dispensing when the hot water begins to dispense, short spurts of hot water may be dispensed which pose a risk of scalding. The hot water spout can reach high temper atures: avoid touching it with bare hands. Begin hot water dispensing. To ...
Page 15
13 9 start rinsing milk rinsing cycle 8 rinsing... Rinsing milk circuit- please wait if the user wishes to continue preparing other drinks the machine will keep the “milk rinsing” signal active. After 20 minutes of inactivity, the machine requires the user to perform a rinsing cycle as described in ...
Page 16: Beverage Dispensing
14 2 3 1 4 5 2 3 4 5 1 beverage dispensing espresso macchiato espresso macchiato cappuccino cappuccino cappuccino espresso macchiato the machine begins grinding the quantity of coffee entered. Press the icon once for 1 cup and twice for 2 cups. Espresso macchiato begins brewing. Once the coffee has ...
Page 17: Beverage Programming
15 2 1 2 1 beverage programming beverage programming menu hold down the beverage button for two seconds press the button "my coffee" and within two seconds, press the beverage button each beverage can be programmed according to your individual taste. Customization is shown on the display with the ad...
Page 18: Beverage Programming
16 1 5 6 7 beverage programming to brew an amount of coffee greater than that preset by the manufacturer, press “custom coffee amount” before the end of the brew cycle in progress. When the quantity is reached, press “stop coffee dispensing”. Pressing start! Allows the machine to brew coffee. The ma...
Page 19
17 8 9 pressing start! Allows the machine to start the brewing cycle. The machine automatically starts and fi nishes dispensing the milk, according to the standard settings. My latte macchiato to dispense an amount of milk greater than that preset by the manufacturer, press “custom milk amount” befor...
Page 20: Programming The Machine
18 programming the machine machine settings when the machine settings are selected the following screen appears. Here you can: set the language of the menus. Set the illuminate cups function. Set the machine operation through the water fi lter set/activate the tones. Set the water hardness. Set the c...
Page 21
19 “l anguage” menu for changing the language of the display. This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. Language “water filter” menu t...
Page 22: Programming The Machine
20 1 2 1 2 3 4 a b c intenza aroma system machine water hardness setting programming the machine rinsing on off “rinse” menu to clean the internal circuits for coffee brewing in order to guarantee that beverages are brewed with fresh water only. In this menu you can: deactivate the rinse cycle. Acti...
Page 23
21 in this menu you can: activate/deactivate a machine ready tone. Activate/deactivate a tone each time a button is pressed. Activate/deactivate a tone that reminds the user to proceed with washing the circuits to prepare milk. Note: the tones are divided in the following way: • long continuous tone...
Page 24: Programming The Machine
22 programming the machine beverage settings to adjust the general brew parameters of the various beverages containing coffee, press the “beverage settings” button on the main menu. For every single beverage, you can adjust: the coffee’s brew temperature. The quantity of coffee to be ground and the ...
Page 25
23 “aroma” adjustment for coffee brewing to set the “aroma” function, that is to say the quantity of coffee to be ground, and to set the use of pre-ground coffee. You can have your beverage with the quantity of coffee you desire or you can choose to prepare it with decaffeinated coffee by using the ...
Page 26: Programming The Machine
24 “coffee of the world” function this function allows the user to prepare coffee according to the most famous recipes in the world. Coffee of the world espresso italiano ristretto good night milk café creme café american coffee good morning coffee prepare a true italian ristretto. Prepare a typical...
Page 27
25 this message remains active for approximately 5 seconds and then returns to the main message. American coffee the beverages in the “coffee of the world” function, if saved, will be associated with the following buttons, and accompanied by an asterisk: • ristretto: • italian espresso: • coffee: • ...
Page 28: Programming The Machine
26 beverage counters beverage counter function this function shows how many beverages have been prepared for every single type of beverage. Hot milk 0 latte macchiato 1 cappuccino 0 espresso macchiato 0 hot water 0 coffee long 15 coffee 0 espresso 0 programming the machine this function shows the ma...
Page 29
27 coffee cleaning cycle maintenance descaling cycle lock display maintenance to clean/maintain all of the machine’s internal circuits, press the “maintenance” button on the main menu. In this menu you can: begin the wash cycle of the brew group. Perform the descaling cycle. Begin rinsing the milk c...
Page 30: Programming The Machine
28 programming the machine milk circuit wash cycle to rinse the machine’s internal circuits used for preparing milk. This cycle is proposed after 14 days from the fi rst dispensing of a milk-based beverage. After 14 days, the “milk cleaning” message starts fl ashing (see page 13). Perform the wash cyc...
Page 31
29 add cleaner to milk conteiner milk cleaning cycle cleaning... Milk cleaning cycle fill the milk container with fresh water up to the «max» level. 7 8 position an adequately sized container under the milk spout. The wash cycle starts automati- cally. Wait for the wash cycle to fi nish. 9 11 12 ok i...
Page 32: Programming The Machine
30 13 14 16 15 rinsing... Milk cleaning cycle rinse the milk container milk cleaning cycle fill milk container with cold water milk cleaning cycle wait… when the rinse cycle has fi nished the above message will appear. Remove the milk container. Rinse the container and fi ll it with fresh water. Perfo...
Page 33
31 coffee circuit cleaning cycle (brew group wash cycle) to clean the machine’s internal circuit used for brewing coffee. It is advisable to perform this wash cycle after 500 coffee brewing cycles, or monthly. Packages of saeco detergent tablets may be purchased at your local dealer or by authorized...
Page 34: Programming The Machine
32 2 1 saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturer’s instructions and/or according to the regulations enforced...
Page 35
33 1 ciclo di risciacquo 3 2 6 5 4 the machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective. In order to run a descaling cycle before the machine indicates the necessity t...
Page 36: Programming The Machine
34 current time 09:45 (am) time settings time format current weekday thursday time setting to set all the parameters relating to the clock and calendar. Important: to correctly program the times for turning the machine on and off, press the “timer settings” button. View the current time setting. Vie...
Page 37
35 time format to set the time view mode. This setting adjusts all clock functions to either “am/pm” or “24 hour” formats. To set the time view mode, press the “time format” button. The modifi catino is immediately applied and in small writing appears ‘am/pm” or “24 hour”. Automatic timer settings wi...
Page 38: Programming The Machine
36 08h (am) turn machine on 15 min setting an interval for turning on the machine in order to program an interval for turning on the machine, press the button for the interval that you wish to set. Adjust the hour to turn on by pressing + or - adjust the minutes by pressing + or - to save the adjust...
Page 39
37 energy saving settings to set after what duration of time, from the last dispensed beverage, the machine will go into stand-by mode. The default setting is "after 3 hours". When the selected duration of time has passed, the display reads “stand-by”. To activate the machine, press “start”. After h...
Page 40: Programming The Machine
38 factory settings the function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the original settings. Press the “factory settings” button. If "yes" is selected, a subsequent confi rmation by inverted switch buttons is requested...
Page 41: Cleaning and Maintenance
39 cleaning and maintenance 1 2 3 1 6 5 4 maintenance during operation during normal operation, the “empty dreg drawer” message may appear. This operation must be performed when the machine is on. If the coffee grounds drawer is emptied with the machine off or when it is not signalled on the display...
Page 42: Cleaning and Maintenance
40 cleaning and maintenance the milk container and the cappuccinatore have been designed to optimize the milk froth. Thorough cleaning and maintenance of the milk container and cappuccinatore will allow you to savour excellent milk-based beverages. It is recommended to rinse the cappuccinatore befor...
Page 43
41 remove the cappuccinatore. Thorough maintenance of the cappuccinatore thoroughly wash the cappuccinatore at least once a week. The components should be hand-washed with household detergents. Separate the upper part of the cappuccinatore from the lower part. Remove the regulator. Remove the cap fr...
Page 44: Cleaning and Maintenance
42 1 2 3 5 4 press to open the service door. The brew group must be cleaned at least once a week. Lubricate the brew group after approximately 500 brewing cycles. The grease for the lubrication of the brew group may be purchased by authorized service centres. Wash the brew group with warm water. War...
Page 45
43 6 5 4 after approximately 2000 grinding cycles, the grinder needs a slight adjustment to ensure it is running in peak condition. Warning! This operation should be carried out carefully and by an experienced user. The screw could fall into the grinder; if it happens remove it before restarting the...
Page 46: Error Codes
44 error codes guide message that appears how to remove the message restart the machine turn off and after 30 minutes turn the machine on again to restore normal operation. Call assistance problem that requires the intervention of the customer service center. Insert drip tray insert drip tray under ...
Page 47: Error Codes / Technical Data
45 error codes / technical data subject to engineering and manufacturing changes due to technological developments. The machine conforms to the european directive 89/336/eec (italian legislative decree 476 dated 04/12/92) concerning electromagnetic compatibility. Nominal voltage see label on the app...
Page 48: Sos
46 sos in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for foaming milk. • for domestic use. • this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental cap...
Page 49
47 • never direct the jet of hot water and/or steam towards yourself or others. Danger of scalding. • do not insert objects through the appliance’s openings. (danger! Electrical current!). • do not pull out the plug by yanking on the power cord or touching it with wet hands. • warning. Danger of bur...
Page 50: Sup 030 Adr
R & d manager mr. Andrea castellani ec declaration of conformity ec 2006/95, ec 2004/118, ec 1992/31, ec 1993/68 saeco international group s.P.A - via torretta, 240 - 40041 gaggio montano (bo) - italy declare under our responsability that the product: automatic coffee maker sup 030 adr to which this...
Page 51
Saeco international group s.P.A. Via torretta, 240 i-40041 gaggio montano, bologna tel: + 39 0534 771111 fax: + 39 0534 31025 www.Saeco.Com the manufacturer reserves the right to change the features of the product without prior notice. © saeco international group s.P.A. T y p e s u p 0 30 a d r c o ...