1. DL manuals
  2. Saeco
  3. Coffee Maker
  4. Primea Touch Plus
  5. Operation And Maintenance Manual

Saeco Primea Touch Plus Operation And Maintenance Manual

Manual is about: SAECO PRIMEA TOUCH PLUS V2 URB SUP030ADR

Summary of Primea Touch Plus

  • Page 1

    Saeco international group s.P.A. Via torretta, 240 i-40041 gaggio montano, bologna tel: + 39 0534 771111 fax: + 39 0534 31025 www.Saeco.Com the manufacturer reserves the right to change the features of the product without prior notice. Le producteur se réserve le droit d“apporter toutes modification...

  • Page 2

    Table of contents operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules mode d'emploi veuillez lire attentivement le mode d'emploi (notamment les consignes de sécurité) avant d'utiliser l'appareil. For household us...

  • Page 3

    Important safeguards when using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 read all instructions and information in this instruction book and any other literature included ...

  • Page 4

    Caution this appliance is for household use. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse base in water. To reduce the risk of fire or electric shock, do not disassemble the base. There are no user serviceable parts insi...

  • Page 5

    2 general information .................................................................................................................................3 machine ..............................................................................................................................................

  • Page 6

    3 the coffee machine is intended for preparing espresso by using either coffee beans or ground coffee. It includes an automatic device for preparing milk products and a hot water dispenser. The machine is elegantly designed for domestic use and is not suitable for continuous heavy duty use of a prof...

  • Page 7

    4 compartment for pre- ground coffee brew group dregsdrawer socket for power cord open coffee bean hopper button coffee bean hopper cup warming plate main switch service door accessories coffee bean hopper cover liquid tray button for raising/lowering the drip tray touch screen display sbs brew unit...

  • Page 8

    5 1 2 3 4 7 6 5 installation attach the female end of the power cord to the machine. Insert the male end into the power outlet. Place a container beneath the hot water spout. Press the button on the coffee hopper to open the cover. Fill the hopper with coffee beans. Close the cover pushing it down c...

  • Page 9

    6 1 1 2 3 manual priming of the water circuit position a container under the hot water spout (it is possible that water will not come out of the spout). Press the display once and the machine will begin priming the water circuit. When the prime circuit cycle is fi nished, remove the container. The ma...

  • Page 10

    7 4 5 6 1 2 3 9 remove the "aqua prima" fi lter from its packaging. Enter the date of the current month. Insert the applicator on the fi lter. «aqua prima» filter to improve the quality of the water used, install the "aqua prima" fi lter. After installation, go to the fi lter activation program (see pro...

  • Page 11

    8 • to get the desired beverage, press the corresponding symbol on the display. The machine automatically performs all the necessary operations. • to make 2 cups, press the beverage symbol twice. Press twice weak medium strong the intensity of the color on the cup icon (only valid for coffee beverag...

  • Page 12

    9 2 1 medium coffee strong coffee mild coffee sbs adjusts the intensity of the brewed coffee, and can even be adjusted while brewing. Any adjustment has an immediate effect on the brewing coffee. Coffee intensitiy sbs – saeco brewing system height adjustable drip tray. To raise the drip tray, press ...

  • Page 13

    10 1 2 3 dispensing coffee, hot water and milk can be interrupted at any time by selecting the "stop ... Dispensing" button. The dispensed milk can reach high temperatures: there is a danger of scalding. Do not touch it with bare hands. Check that all the containers are clean. To do this operation, ...

  • Page 14

    11 1 2 3 4 5 dispensing beverages with ground coffee pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Pour in only coffee ground for espresso machines and never coffee beans or instant coffee. (see the "beverage programming" chapter on page...

  • Page 15

    12 2 2 3 4 5 1 1 6 press the hot water icon once. Hot water dispensing when the hot water begins to dispense, short spurts of hot water may be dispensed which pose a risk of scalding. The hot water spout can reach high temperatures: avoid touching it with bare hands. Begin hot water dispensing. To d...

  • Page 16

    13 2 1 9 hot milk dispensing hot milk press the hot milk icon once. The hot milk is dispensed. Start rinsing milk rinsing cycle rinse the milk tank remove the milk container from the machine; if it sill contains milk, put it back in the refridgerator for later use and substitute the additional conta...

  • Page 17

    14 2 3 1 4 5 2 3 4 5 1 product dispensing espresso macchiato espresso macchiato cappuccino cappuccino cappuccino espresso macchiato the machine begins grinding the quantity of coffee entered. Press the icon once for 1 cup and twice for 2 cups. Espresso macchiato begins brewing. Once the coffee has b...

  • Page 18

    15 2 1 beverage programming beverage programming menu hold down the beverage button for two seconds press the button "my coffee" and within two seconds, press the beverage button each beverage can be programmed according to your individual taste. Customization is shown on the display with the additi...

  • Page 19

    16 1 5 6 7 beverage programming to brew an amount of coffee greater than that preset by the manufacturer, press “custom coffee amount” before the end of the brew cycle in progress. When the quantity is reached, press “stop coffee dispensing”. Pressing go! Allows the machine to brew coffee. The machi...

  • Page 20

    17 8 9 pressing go! Makes the machine prepare to dispense the beverage. The machine automatically starts and finishes dispensing the milk, according to the standard settings. My latte macchiato to dispense an amount of milk greater than that preset by the manufacturer, press “custom milk amount” befo...

  • Page 21

    18 programming the machine machine settings when the machine settings are selected the following screen appears. Here you can: set the language of the menus. Set the illuminate cups function. Set the machine’s operation through the “aqua prima” filter. Set/activate the tones. Set the water hardness. ...

  • Page 22

    19 “language” menu for changing the language of the display. This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the machine is used. Language “aqua prima filter” me...

  • Page 23

    20 1 2 programming the machine rinsing on off “rinse” menu to clean the internal tubes in order to guarantee that the beverages are dispensed only with fresh water. In this menu you can: deactivate the rinse cycle. Activate the rinse cycle. Note: this rinse cycle is performed every time the machine ...

  • Page 24

    21 cup warmer off off while standby always on “cup warming plate” menu to activate the cup warming plate on the upper part of the machine. Keep the cup warming plate always on. In this menu you can: keep the cup warming plate off when the machine is in stand-by. Keep the cup warming plate always off...

  • Page 25

    22 programming the machine beverage settings to adjust the general brew parameters of the various beverages containing coffee, press the “beverage settings” button on the main menu. For every single product, you can adjust: the coffee’s brew temperature. The quantity of coffee to be ground and the u...

  • Page 26

    23 “aroma” adjustment for coffee brewing to set the “aroma” function, that is to say the quantity of coffee to be ground, and to set the use of pre-ground coffee. You can have your beverage with the quantity of coffee you desire or you can choose to prepare it with decaffeinated coffee by using the ...

  • Page 27

    24 “coffee in the world” function this function allows the user to prepare coffee according to the most famous recipes in the world. Caffee del mondo espresso italiano ristretto goodnight milk café creme café american coffee goodmorning coffee prepare a true italian ristretto. Prepare a typical nort...

  • Page 28

    25 this message remains active for approximately 5 seconds and then returns to the main message. American coffee the beverages in the “coffee in the world” function, if saved, will be associated with the following buttons, and accompanied by an asterisk: • ristretto: • italian espresso: • coffee: • ...

  • Page 29

    26 product counters product counter function this function shows how many products have been prepared for every single type of beverage. Hot milk 0 latte macchiato 1 cappuccino 0 espresso macchiato 0 hot water 0 coffee long 15 coffee 0 espresso 0 programming the machine this function shows the machi...

  • Page 30

    27 coffee cleaning cycle maintenance descaling cycle lock display maintenance to clean/maintain all of the machine’s internal circuits, press the “maintenance” button on the main menu. In this menu you can: begin the wash cycle of the brew group. Perform the descaling cycle. Begin rinsing the milk c...

  • Page 31

    28 3 4 5 6 8 9 7 2 programming the machine milk circuit wash cycle to rinse the machine’s internal circuits used for preparing milk. After 14 days from the fi rst dispensing of a beverage with milk, the “milk cleaning” button stars fl ashing (see page 13). Press the button and refer to instructions at...

  • Page 32

    29 10 11 12 14 15 16 17 19 13 18 please start cleaning milk cleaning cycle start cleaning... Milk cleaning cycle rinse the milk tank milk cleaning cycle fill the milk tank with cold water milk cleaning cycle please start rinsing milk cleaning cycle start rinsing... Milk cleaning cycle rinse the milk...

  • Page 33

    30 coffee circuit cleaning cycle (brew group wash cycle) to clean the machine’s internal circuit used for brewing coffee. We recommend using this washing cycle on a monthly basis. Note: before performing this function make sure that: 1. A large enought container is positioned under the spout. 2. The...

  • Page 34

    31 2 1 saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the manufacturer’s instructions and/or according to the regulations enforced...

  • Page 35

    32 1 ciclo di risciacquo 3 2 6 5 4 programming the machine the machine begins to dispense the descaling solution through the hot water spout. The dispensing occurs at preestablished intervals, in order to allow the solution to be more effective. In order to run a descaling cycle before the machine i...

  • Page 36

    33 current time 09:45 (am) time settings time format current weekday thursday time setting to set all the parameters relating to the clock and calendar. Important: to correctly program the times for turning the machine on and off, press the “timer settings” button. View the current time setting. Vie...

  • Page 37

    34 programming the machine time format to set the time view mode. This setting adjusts all clock functions to either “am/pm” or “24 hour” formats. To set the time view mode, press the “time format” button. The modificatino is immediately applied and in small writing appears ‘am/pm” or “24 hour”. Auto...

  • Page 38

    35 08h (am) turn machine on 15 min setting an interval for turning on the machine in order to program an interval for turning on the machine, press the button for the interval that you wish to set. Adjust the hour to turn on by pressing + or - adjust the minutes by pressing + or - to save the adjust...

  • Page 39

    36 programming the machine energy saving settings to set after what duration of time, from the last dispensed beverage, the machine will go into stand-by mode. The default setting is "after 3 hours". When the selected duration of time has passed, the display reads “stand-by”. To activate the machine...

  • Page 40

    37 factory settings the function for restoring all the factory settings is contained in this menu. This function is particularly important for restoring the original settings. Press the “factory settings” button. If "yes" is selected, a subsequent confirmation by inverted switch buttons is requested ...

  • Page 41

    38 1 2 3 4 5 8 7 6 cleaning and maintenance with the brush, clean the pre- ground coffee compartment. Turn the machine off and unplug the cord. Clean the tank and the cover. Remove the drip tray, empty and hand wash. Remove the dregsdrawer, empty and wash. Clean the cappuccinatore as shown in the co...

  • Page 42

    39 1 2 3 5 6 7 9 4 8 press to open the service door. The brew group must be cleaned at least once a week. Wash the brew group with warm water. Warning! Do not wash the brew group with detergents that can compromise its correct operation. Do not wash in the dishwasher. Wash any coffee residues from t...

  • Page 43

    40 3 2 1 1 2 3 to guarantee that the parts that come into contact with milk are perfectly clean and to optimize the performance of your primea cappuccino, we recommend cleaning the appropriate container under running water before dispensing milk-based beverages. To simplify this operation, the machi...

  • Page 44

    41 error codes guide message that appears how to remove the message (switch the machine off and then on again to solve the problem) turn off and after 30 minutes turn the machine on again to restore normal operation. (call customer service center.) problem that requires the intervention of the custo...

  • Page 45

    42 error codes / technical data subject to engineering and manufacturing changes due to technological developments. The machine conforms to the european directive 89/336/eec (italian legislative decree 476 dated 04/12/92) concerning electromagnetic compatibility. Nominal voltage see label on the app...

  • Page 46

    43 sos safety rules in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for foaming milk. • for domestic use. • by adults in non altered psycho-physical conditions. Precautions for the use of the machine • do not u...

  • Page 47

    44 safety rules failures • do not use the appliance if a failure has been verifi ed or suspected, for example after being dropped. • any repairs must be performed by an authorized customer service center. • do not use the appliance with a defective power cord. The manufacturer or its customer service...

  • Page 48

    45 note.