1. DL manuals
  2. Saeco
  3. Coffee Maker
  4. Talea Touch
  5. Operation And Maintenance Manual

Saeco Talea Touch Operation And Maintenance Manual

Manual is about: SAECO TALEA TOUCH TITANIUM SIL SUP032AR

Summary of Talea Touch

  • Page 1

    Operation and maintenance manual before using the machine, please read the attached operating instructions. Carefully read the safety rules mode d'emploi veuillez lire attentivement le mode d'emploi (notamment les consignes de sécurité) avant d'utiliser l'appareil. Espresso italia pty ltd www.Espres...

  • Page 2

    Important safeguards when using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1 read all instructions and information in this instruction book and any other literature included ...

  • Page 3

    Caution this appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service centre. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no user serviceable...

  • Page 4

    2 contents general information ................................................................................................................... 3 appliance ......................................................................................................................................... 4 a...

  • Page 5

    3 the coffee machine is suitable for preparing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage cause...

  • Page 6

    4 touch-screen display appliance compartment for pre- ground coffee accessories “aqua prima” zdwhu¿owhu ground coffee measuring scoop cleaning brush water hardness tester grinder adjustment key power cable brew group dregs drawer socket for power cable coffee bean hopper power button service door co...

  • Page 7

    5 1 2 3 4 7 6 5 when the right temperature is reached, the machine performs a priming and a rinse cycle of the internal circuits. A small quantity of water is dispensed. Wait for this cycle to be completed automatically. See page 21 to enable/disable the rinse function. The screen for product dispen...

  • Page 8

    6 1 2 3 4 5 7 8 6 these settings allow you to regulate the machine’s parameters to dispense coffee according to the typical parameters of the country where it is used. For this reason, the languages are also differentiated by location. Show text 8:30 am 15/06/06 go to menu press “go to menu”. Press ...

  • Page 9

    7 4 9 3 2 5 7 6 8 1 «aqua prima» water filter to improve the quality of the water you use, and extend the life of your machine at the same time, it is uhfrpphqghgwkdw\rxlqvwdoowkh³$txd3ulpd´zdwhu¿owhu$iwhulqvwdoodwlrqjrwrwkhzdwhu¿owhu lqlwldol]dwlrqsurjudpvhhsurjudpplqj,qwklvzd\wkhpdfklqhdgylvhvwkhx...

  • Page 10

    8 • to get the desired coffee, press the corresponding symbol on the display. The machine automatically performs all the necessary operations. • press the icon twice to make 2 cups. Press twice light medium strong the colour intensity of the icon indicates the quantity of coffee to be ground for pre...

  • Page 11

    9 medium coffee strong coffee mild coffee sbs adjusts the intensity of the brewed coffee. The coffee may even be adjusted while brewing. This adjustment has an immediate effect on the selected type of brewing. Coffee intensity sbs – saeco brewing system to raise the drip tray, press lightly on the l...

  • Page 12

    10 1 2 3 4 5 choose the product and press the corresponding icon on the display: once for 1 cup and twice for 2 cups. The machine begins grinding the set quantity of coffee. The machine begins dispensing the selected beverage. Product dispensing coffee brewing can be stopped at any time by pressing ...

  • Page 13

    11 4 2 1 3 6 5 the machine allows you to use pre-ground and decaffeinated coffee.Pre-ground coffee must be poured into the appropriate compartment positioned next to the coffee bean hopper. Only use coffee ground for espresso machines and never coffee beans or instant coffee. (see the “beverage prog...

  • Page 14

    12 1 4 5 6 7 2 3 8 9 product dispensing place a container beneath the steam/hot water spout. Turn the knob until the position is reached. Wait until the machine has dispensed the desired quantity of water. When the machine has dispensed the desired quantity, turn the knob until it is in the rest pos...

  • Page 15

    13 1 5 6 7 2 3 4 8 9 place a container with the beverage to be warmed up beneath the steam spout. Heat the beverage; move the container while heating. :khq\rxkdyh¿qlvkhgwxuqwkh knob until it is in the rest position ( ). After dispensing, clean the steam spout as described on page 36. Note: if the di...

  • Page 16

    14 3 4 5 6 1 8 2 7 9 product dispensing exit steam hot water steam select steam dispensing (see point 2 and 3 on page 13). Place the cup beneath the steam spout. Turn the knob until the position is reached. Froth the milk: move the cup during heating. :khq\rxkdyh¿qlvkhgwxuqwkh knob until it is in th...

  • Page 17

    15 1 2 6 7 8 3 4 5 milk island (optional) this device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the milk island, read the manual and all precautions carefully for correct use. Important note: the quantity of milk in...

  • Page 18

    16 beverage programming beverage programming menu hold down the beverage key for two seconds every beverage can be programmed according to your individual tastes. This customization is shown on the display by adding an asterisk. To program the desired beverage: when a product has been customized, it...

  • Page 19

    17 1 2 3 4 5 6 7 to brew a different amount of coffee than the one preset by the manufacturer, press “custom coffee dose” before the end of the brewing cycle in progress. When the desired quantity is reached, press “stop coffee”. By pressing start! The machine prepares to brew coffee. The machine au...

  • Page 20

    18 programming the machine some of the machine’s functions may be programmed to customize operations according to your own requirements. Press “go to menu”. The programming menu will be accessed: programming the machine operations (see page 19.) product programming (see page 23) setting (see page 25...

  • Page 21

    19 «language» menu to change the display language of the messages. Press “language & display” and “language”. This function was described at the beginning of the manual. This setting is of fundamental importance for correctly adjusting the parameters of the machine according to the country where the...

  • Page 22

    20 programming the machine «ready machine» menu this function activates/deactivates a tone every time the machine is ready. Press “alerts and acoustic settings” and “machine ready”. Alerts and acoustic settings 1.2.2.1. Machine ready off machine ready on «key tone» menu this function activates/deact...

  • Page 23

    21 «rinse» to clean the internal circuits in order to guarantee that the beverages are only made with fresh water. The function is enabled as default by the manufacturer. Note: this rinse cycle is performed every time the machine is turned on after the warming phase. Press “water settings” and “rins...

  • Page 24

    22 1 2 1 2 3 4 programming the machine «water hardness» menu with the “water hardness” function you can adapt your machine to the hardness degree of the water you use. The machine will so require descaling at the right moment. Hardness is expressed on a scale from 1 to 4. The appliance is preset at ...

  • Page 25

    23 beverage settings to adjust the general brew parameters of the various types of coffee. Press “beverage settings” on the main menu. Selecting every single product you can adjust: the coffee’s brew temperature the quantity of coffee to be ground (opti-dose) or the use of pre- ground coffee coffee ...

  • Page 26

    24 coffee temperature adjustment to set the temperature for preparing coffee. Press “temperature” and select the desired temperature. Low temperature medium temperature high temperature «opti-dose» adjustment for coffee brewing to set the coffee quantity to be ground and to set the use of pre-ground...

  • Page 27

    25 set clock to set all the parameters concerning the clock. Important to correctly program the times for turning the machine on and off! Press “set clock”. Time/date settings to set the current time, the stand-by timer and the energy saving function. Press “time/date settings” from the main menu. I...

  • Page 28

    26 programming the machine time format to set the time view mode. The modification of this setting adjusts all the parameters that require viewing/setting the time. Press “time format”. 1.3.1.2. Time format am/pm time format 24 hr american format view mode 24 hr international format view mode date s...

  • Page 29

    27 stand-by settings to set after how much time, from the last dispensing, the machine will go into stand-by. The default setting is «after 3 hours». Press “stand-by settings”. 1.3.3. Stand-by settings after 3 hours after 15 min after 30 min after 1 hour when the set time has elapsed, the machine go...

  • Page 30

    28 machine on/off with this function the machine turns on (activate) and turns off (energy saving) at the desired times.The machine manages this function only if it is turned on at the main power button. Press “machine on/off” 1.3.4. Machine on/off interval 1 on 00:00 off 00:00 week day settings in ...

  • Page 31

    29 1.3.4.1. Interval 1 adjust the hour for turning off by pressing + or – turning off 09 h 00 min adjust the minutes by pressing + or – press the key to return to the turn on times. Note: to save the settings press one of the keys: o for each day, choose the intervals for turning on scroll the days ...

  • Page 32

    30 «total count.» menu maintenance settings to clean/maintain all the machine’s internal circuits. Press “maintenance settings” on the main menu. In this menu you can: display the products dispensed by the machine 1.4 maintenance settings product counters cleaning cycle perform the cleaning cycle of...

  • Page 33

    31 1 2 press “cleaning cycle” «cleaning cycle» menu to clean the machine’s internal circuits used for brewing coffee. To wash the brew group, simply clean with water as shown on page 37. This cleaning completes the maintenance of the brew group. We recommend using saeco tablets, which can be purchas...

  • Page 34

    32 5 2 4 3 1 6 press “boiler descaling cycle” «boiler descaling cycle» menu to perform the automatic descaling cycle. Descaling is necessary every 3-4 months or when the machine indicates it. The machine must be turned on and will automatically manage the distribution of the descaler. A person must ...

  • Page 35

    33 7 13 8 9 10 11 12 14 :khqwkhvroxwlrqlv¿qlvkhgwkh following message appears on the display: remove the water tank, rinse with fresh drinking water to eliminate traces of the descaling vroxwlrqwkhquh¿oozlwkiuhvk drinking water. Insert the tank with fresh drinking water. Rinse the machine’s circuits...

  • Page 36

    34 1 2 maintenance press “lock display” «lock display» menu to clean the display. The touch screen display may be cleaned with a dampened cloth or with appropriate detergents for cleaning displays sold on the market. Solvents, alcohol, harsh detergents and/or sharp objects that may damage the displa...

  • Page 37

    35 1 2 3 factory settings the function for restoring all the factory settings is contained in this menu. Press “factory settings”. If “yes” is selected, a subsequent confi rmation by inverted keys is requested. By selecting “yes” the settings are restored. All the custom settings will be lost and can...

  • Page 38

    36 1 2 3 4 6 5 9 8 7 cleaning and maintenance with the brush, clean the pre- ground coffee compartment. Switch off the machine and unplug it. Clean the tank and the cover. Remove the drip tray, empty and wash it. Remove the grounds drawer. Clean the display with a dry cloth. Remove and wash the stea...

  • Page 39

    37 1 2 7 8 9 3 4 5 6 open the service door and remove the dregs drawer. The brew group must be cleaned at least once a week. Wash the brew group with warm water. Warning! Do not wash the brew group with detergents that can compromise its correct operation. Do not wash in the dishwasher. :dvkwkh%uhz*...

  • Page 40

    38 error codes guide message that appears how to remove the message close coffee bean lid close the coffee bean hopper lid to be able to make a beverage. Add coffee beans fill the coffee bean hopper with coffee beans. Insert brew group insert the brew group in its seat. Insert coffee grounds drawer ...

  • Page 41

    39 technical data technical data nominal voltage see label on the appliance power rating see label on the appliance power supply see label on the appliance shell material abs - thermoplastic size (w x h x d) [[pp´[´[´ weight 9 kg - 19.8 lbs cable length pp´ control panel front (touch-screen) water t...

  • Page 42: Sos

    40 safety rules in case of emergency immediately unplug the cord from the outlet. Only use the appliance • indoors. • for preparing coffee, hot water and for frothing milk. • for domestic use. • by adults in non altered psycho-physical conditions. Precautions for the use of the machine • do not use ...

  • Page 43

    41 failures ‡ 'rqrwxvhwkhdssoldqfhlididloxuhkdvehhqyhul¿hgruvxvshfwhgiruh[dpsohdiwhuehlqjgursshg • any repairs must be performed by an authorized customer service center. • do not use the appliance with a defective power cord. The manufacturer or its customer service center will have to replace the ...