Safa Media SR-M160N User Manual - Recording
11
Recording
Please note the followings before you start recording
ƃ
Check that the product is in standby mode.
ƃ
Press and hold Power/Play button in the stop state to turn off the power.
Ȟ
If it is not established as Recorder Mode (the Mode of Picture 1-1), recording is impossible.
Ȟ
Press the (POWER/PLAY) button to display the remaining recording capacity.
Ȟ
The maximum index number for each Folder is 99 (Up to 297 Folders: 99 X 3 )
Ȟ
If the recorded time exceeds the capacity limit, "FULL" is displayed in the LCD.
Then, you have to delete a part of the recorded contents to continue to record.
Before you delete, copy the contents into the external appliances (tape or computer).
Ȟ If the number of the recorded files is over 99, "FULL" is displayed in the LCD.
Then, push Folder/Repeat key and move to other folder to record.
If each folder such as A, B or C has 99 recorded files, you cannot
record at all. So delete several recorded files and continue to record
after copying the files into the external appliances (tape or computer).
Ȟ Don't take out battery or connect USB to PC in the middle of Recording.
It may cause error.
Ȟ In case of long-term recording, please use it after previously replacing
battery in STOP Mode or turned-off state.
Ȟ Do not touch or move the product while you are recording via the built-in
Microphone. This may cause unnecessary noise on your recording.
Ȟ Pause status during record continues for 15 minutes and power
automatically turns off after 15 minutes.
Ȟ Even if pressing any button for 3 seconds after starting record, the
product will not operate.
(Figure 2-1)
10
1
Switching On
If pressing the (POWER/PLAY) button lengthily, power turns
on and the product becomes Pause status.
Ȟ If time is not set, "Date" flickers. You can escape by setting time,
pressing the MENU/HOLD button shortly or pressing it lengthily.
(Refer to page 23.)
Switching MP3 VOICE RECORDER Off
The power will be automatically shut off if you do not
do activate any functions for 15 minute.
Ȟ Press and hold (POWER/PLAY) button in the stop
state to turn off the power.
(Figure 1-1 : Recorder Mode, Figure 1-2 : MP3 Player Mode)
2
Locking the button (HOLD)
HOLD function is useful for preventing false operation during
play or recording.
1. If you push MENU/HOLD Key for long time (about 2 seconds)
under Recording/Play/Stop Mode, it will in Hold On
Mode. Although you push other Key in Hold On Mode,
other Key except MENU/HOLD Key won't operate while
indicating 'Hold On'on LCD.
(Figure 1-3)
2. Press and hold MENU/HOLD button (for about 2 seconds)
in the hold on state to release lock state.
If 'Hold OF' is indicated in LCD, it will be in Normal
Operation Mode while Hold Mode is released.
(Figure 1-4)
(Figure 1-1)
(Figure 1-2)
(Figure 1-3)
(Figure 1-4)
Getting Started
0722 SF69-00588A-E 2005.7.23 1:11 AM 페이지 10