Safa Media SRM520 Instructions For Use Manual - page 15
27
28
Firmware Upgrade
Connecting to PC
1. Download the firmware update for your Voice Recorder
from internet website. Extract the file and place it in the
Voice Recorder ROOT directory(Fig83).
2. Press the
PLAY/STOP button for a few moments to switch
power on, and then automatically to upgrade (Fig.84, 85).
Fig.83
Fig.84
Fig.85
Warnings
1. Do not attempt to open, repair, or modify your Voice Recorder.
2. Do not use your Voice Recorder where the use of
electronic devices is prohibited (such as in aircraft, etc.).
3. Do not put your Voice Recorder or its accessories in
your mouth.
4. Do not immerse your Voice Recorder or spill liquids on it.
5. Do not expose Voice Recorder or its accessories to
shocks, as this may cause malfunctions.
6. Do not apply excessive force to the LCD display, as this
may damage the display or cause malfunctions.
7. Do not expose Voice Recorder to direct sunlight or any
source of heat for a prolonged period.
8. Remove the battery if you will not be using the Voice
Recorder for an extended period.
9. Do not pull attached earphone, microphone, or USB cable
with excessive force.
The information in this User Manual is subject to change
without notice.
Recommended PC environment
Supported PCs IBM PC/AT compatible
Supported OS Windows XP Professional
Windows XP Home Edition
Windows Millennium Edition(Me)
Windows 2000 Professional
Windows 98 Second Edition
Windows 98
USB port One required for connection
Sound board 16-bit Windows-compatible sound
board supported
Other Speakers or headphones required
- Supplied windows 98 usb driver files from seller.
- Operation is not guaranteed for Macintosh PCs.
- Operation is not guaranteed for the following
environments.
Upgraded Windows environments
Windows 95, Windows NT
Dual-boot Windows environments
- Standby, suspend, and other modes may not work
properly with your particular environment. If this is the
case, do not use those modes.
Note
Supplied Windows 98 USB driver files