SafeFamily S1 User Manual - page 2
3.1 Deleting center nunber directive: CENTER, D#, terminial will response
“OK” if success.
Adding SOS numbers
4.1 Sending SMS text by center number cellphone could set SOS numbers,
total 3 numbers.
4.2 Adding SOS numbers directive: SOS,A,Number 1,Number 2, Number3#
Ex: SOS,A,123456789,987654321,55555555#
4.3 Terminal will response “SOS (1,2,3) numbers setting success or OK!” when
SOS numbers setting successfully.
Delete SOS numbers
5.1 If need to delete certain numbers, could send inquiry parameter directives
to terminal, and get the sequence No of certain numbers, then sending delete
directives SMS to the terminal to delete it.
5.2 Three ways to delete directive numbers
1. SOS, D, 1, 2, 3# (Delete muti numbers)
2. SOS, D, number sequence#
3. SOS, D, number#
5.3 If delete SOS numbers successfully, terminal will response “SOS numbers
delete successfully or OK!”
Inquiry parameter setting up
6.1 When you need to inquire terminal parameters setting status, need to send
parameter setting up SMS text to terminal SIM card number, terminal will
respond corresponding parameter setting figurations.
6.2 Inquire parameter directive format:PARAM#
Work mode and work mode setting up
7.1 Mode 1(Standard mode)
GPS terminal continuous working, upload data timely.
7.2 Mode 2(Power saving mode)
Terminal GPS will upload data imediately when locating success, then turn to
sleeping mode, every 10minutes later will turn on GPS automatically.
7.3 Mode 3(Base station locating mode)
GPS not working, inquire base station locating data to upload. GPS will wake
up when center number called or sending message, then go into sleeping
mode 2 mins later.
7.4 Mode4 ( no platform mode, minimum of power consumption)
This mode does not require platform. It only replies when using url# SMS to
check google map and link.
Setting GPRS time interval of transmission position data
Default GPRS time sending interval can be set separately. If default GPRS