Safety Basement SB-CVR4000 Instruction Manual - Before You Start
of
7
BEFORE YOU START
Before you use your Cross DVR you will do the following:
• Plug your DVR into your PC
• Charge it fully
• Download time files from www.SafetyBasement.com
• Set your timestamp on the DVR
CONNECT YOUR CROSS TO PC
Use the included USB cable.
Connect one end to the USB port in your pen.
Connect the other end to a USB port on your PC. Please do not use a hub.
In a few moments, your PC will connect to your pen. Your PC may install standard drivers
the first time it connects. This is normal.
No additional drivers are required.
The status light will appear while connected to your PC.
Your Cross DVR is now charging. and also ready to download any files from it to your
computer