Safety Basement SB-MSDVR660 Instruction Manual - Connecting to Pc / Mac
Page 22
PRODUCT MANUAL
Kingfisher Micro DVR : SB-MSDVR660
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
WINDOWS - RETRIEVE YOUR FILES
1. Please wait until Windows recognizes your device. This may take several seconds. Note: the
first time you connect your device, Windows may install standard drivers. This is normal.
2. Access your device as you would any standard Flash Drive.
3. COPY your files from the device to a folder on your PC. You may now highlight and
DELETE the files from your device.
4. Be sure to properly EJECT your device from Windows before unplugging it.
MAC OS X - RETRIEVE YOUR FILES
1. Please wait until Mac recognizes your device. This may take several seconds. It will mount as
a Device in your FINDER.
2. Access device as you would any standard FLASH DRIVE.
3. SPECIAL NOTES TO MAC USERS!
4. To properly save your files to your Mac, MOVE your files, rather than copy.
5. Create a folder on your Mac.
6. Highlight the files on the device.
7. CMD CLICK and drag the files to your folder. Let go and choose MOVE.
8. To properly empty your device on Mac, be sure to Empty your Trash Can before ejecting the
device.
9. Be sure to properly EJECT your device from Mac before unplugging it.
NOTE: Please copy your files to your PC for smoother playback. For larger files, you may find it
faster to remove the SD card and plug it directly into an SD card reader.
Remember to put your DVR Q-Switcch back in the N position.
Thank you! And enjoy your new device from SafetyBasement.com!
CONNECTING TO PC / MAC
1. Be sure that your DVR is OFF.
2. Conect the small end of the USB cable to your DVR.
3. Connect the other end of the USB cable to your PC. The DVR red status light will appear, as
your battery will charge from the USB port.
4. You must push the Q-Switch to the Q position for it to have a data connection to your PC.
5. The screen will show “MASS STORAGE” when it connects to your PC.