Safety Track UCIT LIVE HD Installation Manual - Please Follow Each Step
This is a step by step guide that will walk you through installing the UCIT
LIVE HD 4 Channel Camera System. Basic wiring experience and
knowledge is required at the minimum.
Please follow each step
, otherwise
your system may not work properly. If you have any questions regarding
the installation of this system contact Support at 888-286-9829 Press #6 or
Support@SafetyTrack.net. We are always available for questions when
needed. Please take your time, take caution and Enjoy!
Tools Required:
•
Power Drill
•
Volt Meter
•
Wire Crimpers
•
Wire Strippers
•
Electrical Tape
•
Zip Ties
•
Wire Connectors (Installer’s
Choice ex.T-tap, ring connector,
or simply poke and wrap)
•
Extra wire (Shouldn’t need but
just in case)
•
Screwdrivers (flat head and
philips)
•
Self Tapping Screws
•
3M Double Sided Trim Tape*
•
Auto trim removal tool*
•
Flashlight*
What’s In The Box:
•
DVR (SD Card Pre-Installed)
•
Power Harness
•
Accessory Harness
•
Camera(s) (individually boxed
with mounting hardware)
•
Camera Cable(s)
•
GPS Antenna
•
Individually Powered Microphone
and Extension Wire
•
Whip Antenna
•
Whip Antenna Extension