Observer™ 4116 nvr hardware user guide.
Important notices title: observer™ 4116 nvr hardware user guide document version: 1.2 safety vision attempts to provide information contained in this manual based on the latest product information available at the time of publication. However, because of safety vision’s policy of continual product i...
Table of contents main wiring diagram 2 installation 3 hard drive removal 4 sd card insertion/removal 5 components 6 appendix a: specifications 8 appendix b: dimensions 9 observer 4116 nvr hardware guide 1.
Main wiring diagram can box connections to color gnd black 485b-1 green 485b-1 white +5v red observer 4116 nvr hardware user guide 2.
Installation flat mount secure the nvr to the surface with self-tapping screws or rivets. Ensure that the front panel of the nvr remains accessible and there is a minimum 2.5 inches of clearance for cables.. Do not install the nvr in an area of the vehicle cabin that could interfere with the safe op...
Hard drive removal to remove the hard drive from the nvr: 1. Ensure the nvr is powered off. 2. Release the two faceplate security tabs on the side of the enclosure. 3. Insert the key into the faceplate lock and turn it clockwise. 4. Open the faceplate. 5. Pull the hard drive firmly and straight out....
Sd card insertion/removal do not force the sd card into the slot upside down or backwards. Ensure the sd card’s write protection slider is in the “unlocked” position. Do not remove the sd card until the nvr is turned off. 1. Open the faceplate as described in the previous procedure. 2. Open the sd c...
Status leds lan indicates network activity power nvr is receiving power rec nvr is recording video vloss one or more cameras is detached or malfunctioning alm event/alarm has occured err storage error - corrupted driver or unformatted drive components 1 - removable hard drive - the hard disk drive (...
1 - power port - connection for the main power harness. 2 - panel port - connection for optional cp4-series monitors. 3 - serial port - connection for the sensor block wiring harness. 4 - wan/lan ports (rj45) - connections for optional network accessories. 5 - gps antenna port - connection for the e...
Appendix a: specifications specifications part no. 4116-nvr os support linux 3.0.8 access control cp4, web interface (wi-fi or interface), mouse (wireless) cameras supported up to 16 ip cameras audio/video output port 1 video output channel and 1 audio output channel (sv-vid-mon-out required) displa...
Appendix b: dimensions observer 4116 nvr hardware guide 9 observer 4116 nvr hardware user guide.
Fcc compliance statement this device has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environm...
Observer 4116 nvr hardware user guide 11.
Copyright © 2017 safety vision, llc all rights reserved. Corporate headquarters 6100 w. Sam houston pkwy. N. Houston, tx 77041-5113 main: 713.896.6600 toll free: 800.880.8855 fax: 713.896.6640 www.Safetyvision.Com.
