Safety Vision OBSERVER 4116 Hardware User's Manual - Installation
of
14
Installation
Flat Mount
Secure the NVR to the surface with self-tapping
screws or rivets.
Ensure that the front panel of the NVR
remains accessible and there is a minimum
2.5 inches of clearance for cables.. Do not
install the NVR in an area of the vehicle cabin
that could interfere with the safe operation
of the vehicle.
Security Cover
After connecting all needed cables to the
rear of the NVR as shown in the Main Wiring
Diagram, secure the Security Cover with the
included Phillips head screws as shown in the
diagram.
OBSERVER 4116 NVR HARDWARE GUIDE
3
OBSERVER 4116 NVR HARDWARE USER GUIDE