Saffire Grill Co. SG22 NC Owner's Manual - For Model Sg22
For Model SG22
on Stainless Steel Setting (Cart) Start on page 5.
Begin here for SG22-NC
model for Wood Cart or Built-in
SAFFIRE ENCLOSURE DIMENSIONS
If you will be building your own enclosure for the Saffire Grill, use the following dimensions and guidelines.
It is always best to build a non-combustible enclosure with masonry and/or steel studs and cement board
(Hardiebacker, Wonderboard, Durock etc.).
If you are using combustible materials in the enclosure keep them away from the grill.
It is best to keep your countertops and the area underneath the grill of non-combustible materials.
- Always keep the surface of the grill at least 1 away from combustible materials inside
the enclosure and at the counter top.
- In a sealed, combustible enclosure make sure there is at least 20 square inches of
ventilation at the bottom and also at the top of the enclosure. This will provide enough
air to cool the enclosure and feed the fire.
ASSEMBLY
(You may view the assembly video online at www.SaffireBBQ.com.)
Page 3
1/2