Sage The Smart Grill Pro BGR840 Instruction Booklet - page 7
12
13
OPERATING YOUR NEW APPLIANCE
OPERATING YOUR NEW APPLIANCE
USE AS A CONTACT GRILL WITH
SMART SETTINGS AND PROBE
1.
Repeat Preparation and Preheating Steps
on pages 8 & 9. For best results, set PLATE
TEMP dial to SEAR (230°C).
2.
While the grill is preheating, adjust the
angle of the cooking plates to the desired
position by turning the PLATE TILT dial.
The PLATE TILT dial is located on the
lower back, right side of the grill.
3.
Ensure probe is installed correctly as per
point 6 in the section PREPARING THE
GRILL FOR USE on page 8. Unwrap probe
from Probe Storage.
4.
Insert probe gently into the side of the
meat, ensuring that it is positioned in the
thickest part and directly in the centre of
the meat.
5.
To select meat type, rotate the FOOD
dial to scroll through food menu. An
arrow indicator will show alongside
selected meat.
SET TEMP PLATE TEMP
FOOD
SET
TEMP
6.
Once meat type is selected, press the
SET TEMP button to scroll through
doneness settings. An arrow indicator
will show alongside selected doneness.
FOOD
SET
TEMP
SET TEMP PLATE TEMP
7.
To open the grill:
a)
Ensure the grill has completely preheated
and the LCD screen no longer flashes
PLATE TEMP.
b)
Ensure the top cooking plate is closed.
The Height Control Clip, located on the
right side of the top plate, should be in the
OPEN position.
c)
Use the handle to open the top plate to a
90 degree position.
d)
Place meat with probe inserted on the
bottom cooking plate. For best results,
ensure PLATE TEMP dial is set on SEAR
(230°C).
8.
Use the handle to close the top cooking
plate. When cooking with the probe it is
recommended that the top plate of the grill
is in the closed position, with the Height
Control Clip in the OPEN position.
9.
During cooking 3 alerts will sound and
REST MEAT and selected doneness will
flash to indicate it is time to remove the
meat from the grill to rest.
10.
When food is cooked, remove meat from
grill using heatproof plastic or wooden
utensils. Pull out probe and place meat
onto a plate or tray. Cover loosely with foil.
Allow to rest for a minimum of 5 minutes
before serving.
11.
To turn off grill, turn PLATE TEMP dial to
the OFF position.
NOTE
The grill does not automatically stop
cooking once REST MEAT flashes.
If meat is not removed you risk over
cooking.
FOR BEST RESULTS
•
For even results, select meat with
even thickness.
•
When cooking cuts of meat with irregular
thicknesses such as chicken breast, edges
can remain slightly pink. After cooking is
complete, sear any undercooked edges on
the hot cooking plates.
•
Do not use spray-on, non-stick coatings
as these will affect the performance of the
non-stick cooking plates.
•
Never use metal or sharp utensils as these
can cause damage to the non-stick coating
of the cooking plates.
USE IN OPEN FLAT BBQ MODE
The grill opens flat into a 1650 sq. cm grilling
surface. The ribbed cooking plate is perfect for
searing meats while the flat cooking plate is
ideal for eggs, pancakes and vegetables.
1.
Repeat Preparation and Preheating Steps
on pages 8 & 9.
2.
While the grill is preheating, adjust the
angle of the cooking plates to the desired
position by turning the PLATE TILT dial.
The PLATE TILT dial is located on the
lower back, right side of the grill.
3.
To open the grill into BBQ mode:
a)
Ensure the grill has completely preheated
and the LCD screen no longer flashes
PLATE TEMP.
b)
Ensure the top cooking plate is in the
closed position, with the Height Control
Clip in the OPEN position.
c)
With your left hand, grip the handle.
With your right hand, pull the Height
Control Clip on the right side of the grill
towards you, into the BBQ mode position.
Continue to pull the clip forward and
simultaneously lift the handle to open,
then gently lower the top plate into the
horizontal BBQ mode position.
4.
Place food on either or both of the cooking
plates. Refer to grilling tips (page 15) and
recipes (page 19).
5.
If using the probe, repeat steps 3–6 on
page 11 to insert the probe and select
desired doneness setting before placing
meat on the grill.
NOTE
The probe and smart settings have been
optimised for cooking in contact mode.
As a result, additional cooking time
may be required when using the probe
in BBQ mode. For best results, it is
recommended to flip meat regularly.