Sagem PHONEFAX 43S User Manual - 10 Settings
28
Sagem · SPFX 43 · 47 · SP 4840
EN
10 Settings
Cursor Navigation 1
Entering the Date and Time
1
Press OK, 91 and OK.
2
Enter the time, e.g. 14 00 for 2 pm.
3
Enter the date (two digits for each field), for example
08
06 27 for June 8th, 2027.
4
Confirm with OK.
Time and Date After a Short Power Failure
Selecting the Language
1
Press OK, 92 and OK.
2
Use [ to select the desired display language.
3
Confirm with OK.
Selecting the Country
Setting the Country Correctly
Reset When Setting the Country
1
Press OK, 93 and OK.
2
Use [ to select the country in which you are operat-
ing the device.
3
Confirm with OK.
4
Using [ select SURE: YES.
5
Confirm with OK.
Entering Number
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
1
Press OK, 94 and OK.
2
Enter your number. Using # or * you can enter a
plus sign.
3
Confirm with OK.
Entering Name
1
Press OK, 95 and OK.
2
Enter the name using the letter keypad. Enter capital
letters by pressing and holding + key. You can delete
individual characters using \. You can enter space
using ½. Press CTRL and the respective letter key to
enter the special character printed above it.
3
Confirm with OK.
Setting the Contrast
Setting the Contrast
For copying and printing of fax messages, you can select
different contrast levels.
1
Press OK, 44 and OK.
2
Using [, select the desired contrast:
CONTR.:LIGHT—For brighter copies and fax trans-
mission
CONTR.:NEUTRAL—For all types of originals (for
example white text on black background or documents
with coloured background)
CONTR.:OPTIMISED (Factory settings)—Opti-
mized adaptation for text and photo printing
CONTR.:DARK—For darker copies and fax transmis-
sion (for example documents with faint printing)
3
Confirm with OK.
Modifying the Basic Settings
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters. Press j to close the
menu and return to the starting mode.
Notice
Time and Date After a Short Power
Failure
You must check the time and date after a short
power failure. Confirm with OK.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
CAUTION!
Settings will be Deleted!
When you select a new country, all settings are
reset to the factory defaults for that country.
Saved data remains intact. Check the number
entered for the header.
Notice
Navigating in the Editor
You can move the cursor using [. Use C to
delete individual characters.
Notice
Modifying the Basic Settings
The changed settings are stored as new default
settings. If you select a special function for a
one-time process, take care to restore the default
settings or factory settings after that.