- DL manuals
- Sailor
- Radio
- 6216
- User & Installation Manual
Sailor 6216 User & Installation Manual
Summary of 6216
Page 1
User & installation manual sailor 6215 vhf dsc.
Page 3: Thrane & Thrane A/s
Thrane & thrane a/s sailor 6215 vhf dsc user and installation manual document number: 98-128471-thr-e release date: december 18, 2012.
Page 4: Disclaimer
Disclaimer any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed by thrane & thrane. The information in this manual is provided for information purposes only, is subject to change without notice and may contain ...
Page 5: Safety Warning
Iii safety warning 1 the following general safety precautions must be observed during all phases of operation, service and repair of this equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intend...
Page 6: Emergency Calls
Iv emergency calls m m m m ma a a a ay yy yyd d d d da a a a ay yy yy na na na na name me me me me of the v vv v ve ee ees ss sss ss ssel el el el el in distress c cc ccal al al al alllllls ss ssign ign ign ign ign or other iden iden iden iden identttttific ific ific ific ifica a a a atttttion ion i...
Page 7: Preface
V preface 2 radio for occupational use the sailor 6215 vhf dsc fulfils the requirements of the ec directive 1999/5/ec, radio and telecommunications terminal equipment and is intended for use in maritime environment. Sailor 6215 vhf dsc is designed for occupational use only and must be operated by li...
Page 8
Vi.
Page 9: Table of Contents
Vii table of contents chapter 1 introduction vhf radio with dsc ............................................................ 1 chapter 2 operation general use and navigation .............................................. 6 vhf radio communication ................................................ 12 h...
Page 10: Chapter 4
Table of contents viii chapter 4 service & maintenance contact for support .......................................................... 67 maintenance ................................................................... 67 equipment and accessories ..............................................74 warra...
Page 11: Introduction
1 chapter 1 11111 introduction introduction 1 vhf radio with dsc sailor 6215 vhf dsc, your new sailor vhf radio with full dsc functionality, is approved to r&tte and is waterproof to the ipx8 and ipx6 standard. As part of the required safety equipment, use the sailor 6215 vhf dsc in an emergency sit...
Page 12: Controls On The Front Plate
Chapter 1: introduction 2 vhf radio with dsc controls on the front plate 1. Loudspeaker. 2. Four soft keys with function title in the display. 3. Quick selection key for channel 16 and the programmed call channel. 4. Large display. 5. Connector for handmicrophone or handset. If not used, put the cap...
Page 13: Sailor 6215 Vhf Dsc Display
Chapter 1: introduction vhf radio with dsc 3 11111 introduction sailor 6215 vhf dsc display the picture shows the display after start-up. The display holds various fields of information, depending on the currently selected function. 1. Action line containing information relevant for the currently se...
Page 14
Chapter 1: introduction 4 vhf radio with dsc system configuration - example handset microphone ais receiver gps in (nmea 0183) cable service loud hailer (4 ohm) speaker (8 ohm) external acc. Port power handset option sailor 6205 sailor 6201 sailor 6201 99-129890-d vhf dsc - hand microphone sailor 62...
Page 15: Operation
5 chapter 2 22222 operation operation 2 in this chapter you find detailed instructions and guidelines for: • general use and navigation • vhf radio communication • hi/lo transmission power • watch • scan • radio setup • dsc calls • phone book • loudhailer with talk-back • automatic foghorn • replay ...
Page 16: General Use and Navigation
Chapter 2: operation 6 general use and navigation general use and navigation power on and speaker volume the vhf radio has a dual-function on/off wheel knob for power on/off and volume control. • to power on the vhf radio press the on/off wheel knob. • to power off the vhf radio, press and hold the ...
Page 17: Dsc and Mmsi Number
Chapter 2: operation general use and navigation 7 22222 operation dsc and mmsi number when the vhf radio is powered on for the first time, you must enter the vessel’s mmsi number. Hereafter the mmsi number is briefly displayed after power up. The mmsi is a unique, 9-digit identifier assigned to your...
Page 18
Chapter 2: operation 8 general use and navigation once programmed, you can see the mmsi number in the service line directly after start-up. The dsc functionality is operational at any time. The message no dsc (no mmsi) is shown in the action line if the mmsi is not programmed. Position and mmsi info...
Page 19: Speaker Devices
Chapter 2: operation general use and navigation 9 22222 operation speaker devices the vhf radio can be equipped with the following speaking devices: • sailor 6202 handmicrophone with a ptt (push to talk) button. • handset with a microphone, ear piece and a ptt button. The volume in the ear piece can...
Page 20: Controller Setup
Chapter 2: operation 10 general use and navigation the functions of the sailor 6215 vhf dsc are accessed and set using the four soft keys to the left of the display. The current function of a soft key is shown in the display next to the soft key. For some applications there are two control levels • ...
Page 21
Chapter 2: operation general use and navigation 11 22222 operation 3. Turn the selector wheel knob to go to a setting, then press the selector wheel knob to change the setting. 4. Press exit to return to normal radio operation. Parameter description handset 1 vol: adjust earpiece volume for handset ...
Page 22: Vhf Radio Communication
Chapter 2: operation 12 vhf radio communication vhf radio communication in this section of the manual you find information on • basic vhf operation • vhf channels • programming a call channel • naming a channel basic vhf operation you can make vhf calls using the handmicrophone or another speaking d...
Page 23
Chapter 2: operation vhf radio communication 13 22222 operation receiving a radio telephone call on channel 16 when you hear your call name in the loudspeaker, proceed as follows: 1. An rx symbol shows that the radio is receiving on the channel displayed. 2. Lift the handmicrophone or take the hands...
Page 24: Vhf Channels
Chapter 2: operation 14 vhf radio communication 6. Say: “over.” and release the ptt key to listen. An rx symbol shows that the radio is receiving on the working channel displayed 7. When answered, agree upon a working channel other than 16. 8. Switch to the new channel by turning the selector wheel ...
Page 25: Programming A Call Channel
Chapter 2: operation vhf radio communication 15 22222 operation programming a call channel to program a call channel (or quick selection), do as follows: 1. Make an extra-long press (2.5 s duration) on the 16/c key. 2. Press the soft key call ch. The channel designator is flashing. 3. Turn the selec...
Page 26: Engagement Status
Chapter 2: operation 16 vhf radio communication display for non-vhf applications when the radio is used for functions other than vhf, the display is arranged differently. The large channel display moves to the bottom line along with selected icons. The channel displayed in this line will always refl...
Page 27: Hi/lo Transmission Power
Chapter 2: operation hi/lo transmission power 17 22222 operation hi/lo transmission power press the soft key hi/lo to toggle the transmit power between low (1 w) and high (25 w). If lo is not displayed, the transmit power is hi. Us channels: local mode, 10 db attenuation to attenuate to the incoming...
Page 28: Watch
Chapter 2: operation 18 watch watch the sailor 6215 vhf dsc radio can be set to dual watch or triple watch. In dual watch, the working channel and channel 16 are watched. In triple watch the working channel, channel 16 and the programmed call channel are watched. You can select the working channel i...
Page 29: Scan
Chapter 2: operation scan 19 22222 operation scan the radio has a scanning function for tagged channels. Any available channel, including weather and private channels, can be tagged and added to the scanning sequence. As default the radio scans with priority scanning of channel 16. If a signal is re...
Page 30
Chapter 2: operation 20 scan us channels: watch alarms for noaa weather alerts you can turn on or off an independent watch alarm for a specific weather channel. To turn on or off an independent noaa weather alarm do as follows: 1. In the scan menu, turn the selector wheel knob to select a specific w...
Page 31: Radio Setup
Chapter 2: operation radio setup 21 22222 operation radio setup in the radio setup you set scan and watch mode, select the channel table and can set and view the atis code. To change a setting in the radio setup, do as follows: 1. Press the soft key setup. If it is not in the display, press the soft...
Page 32
Chapter 2: operation 22 radio setup priority scan on: all channels tagged for scanning are scanned while monitoring channel 16. (default). Off: only the channels tagged for scanning are scanned in sequence, not channel 16, unless it is tagged for scanning. Channel mode to select the channel table fo...
Page 33
Chapter 2: operation radio setup 23 22222 operation atis code the atis code (automatic transmitter identification system) is used for identification to marine coast and inland stations and its use is mandatory in a number of european inland waterways such as e.G. The river rhine. Like the mmsi numbe...
Page 34: Dsc Calls
Chapter 2: operation 24 dsc calls dsc calls in this section of the manual you find information on: • sending, acknowledging and cancelling own distress • receiving distress calls • dsc calls for communication • dsc setup sending, acknowledging and cancelling own distress to send a distress message t...
Page 35
Chapter 2: operation dsc calls 25 22222 operation having pressed the red distress button and sent the distress message, press the soft key info to display further information: • station: shows the radio’s mmsi number. • nat: shows the nature of distress, see also to send a distress message with spec...
Page 36: To Acknowledge Own Distress
Chapter 2: operation 26 dsc calls 3. Press the selector wheel knob to accept the selected nature of distress. 4. Then lift the cover of the red distress button and push the distress button for 3 seconds. To acknowledge own distress when the sailor 6215 vhf dsc receives an acknowledgement of distress...
Page 37: To Cancel Own Distress
Chapter 2: operation dsc calls 27 22222 operation to cancel own distress if you need to cancel a sent distress message do as follows: 1. The display shows that a distress message has been sent. Press the soft key annul. 2. Press the soft key yes to go ahead with the cancelling process. At this stage...
Page 38: Receiving Distress Calls
Chapter 2: operation 28 dsc calls power failure while in distress in case of a power failure or switch-off during the transmission of a distress the sailor 6215 vhf dsc gives an audible warning after power-up and automatically resumes sending distress 10 seconds after power up. Within the 10 seconds...
Page 39: Distress Call With Errors
Chapter 2: operation dsc calls 29 22222 operation distress call with errors if a distress call contains errors, it is still received and errors in the data are shown as underscores (_). Distress call log as long as you are part of a distress session, i.E. You have not pressed quit, you receive distr...
Page 40: Dsc Calls For Communication
Chapter 2: operation 30 dsc calls dsc calls for communication with a dsc call you can establish a radio communication with one or several specific radios on a suggested vhf channel. To make a dsc call for communication, do as follows: 1. Press the soft key call. The default call is an individual rou...
Page 41: Sessions
Chapter 2: operation dsc calls 31 22222 operation • press and turn the selector wheel knob to change the suggested vhf channel for following communication. 3. Press the soft key send to make the call. Sessions a dsc session (or automated procedure) is defined as a collection of dsc calls (transmitte...
Page 42
Chapter 2: operation 32 dsc calls 4. Elapsed time since the reception of a call request or an acknowledgement. 5. Session state: • (active) — transmitter tuned into the communication channel. • (hold) — parked session. 6. Channel used for following communication (if any) when the session is active. ...
Page 43
Chapter 2: operation dsc calls 33 22222 operation soft keys to control dsc sessions call/session types vary in control options, and options may also change if a session changes its state. The following table gives an overview of the dsc soft key commands available: soft key radio function quit termi...
Page 44
Chapter 2: operation 34 dsc calls see also handling a background session on page 37. Annul (cancel own distress) cancels an inadvertently transmitted distress confirm (cancel own distress) confirms action and proceed sequence, used in cancel distress procedure info (in cancel own distress) turns pag...
Page 45
Chapter 2: operation dsc calls 35 22222 operation detail information for dsc sessions (soft key: info) a dsc session is updated based on dsc calls received or transmitted. Press the soft key info to show the details for the current session. For distress events a sequence of calls may contribute to t...
Page 46: Receiving Dsc Calls
Chapter 2: operation 36 dsc calls receiving dsc calls if the radio is idle (not engaged in another session) and a dsc call is received the call details are shown on the display. The following options (soft keys) are available: if the radio is engaged while receiving a dsc call, the call is shown if ...
Page 47
Chapter 2: operation dsc calls 37 22222 operation soon the current dsc session is terminated. The call with the highest priority (importance for safety or life) is shown first. Handling a background session the equipment is designed with the possibility to control a dsc session simultaneously with a...
Page 48: Dsc Call Logs
Chapter 2: operation 38 dsc calls dsc call logs to display a dsc call log in the dsc call logs, do as follows: 1. Press the soft key setup. If it is not in the display, press the soft key more until setup appears. 2. Press the arrow soft key or to advance to dsc call logs. 3. Turn the selector wheel...
Page 49
Chapter 2: operation dsc calls 39 22222 operation 4. Press exit to return to normal radio operation. Dsc setting description position info available position information. Here you can enter position data, see also position and mmsi information on page 8. Auto-ack test auto-acknowledgement of test ds...
Page 50
Chapter 2: operation 40 dsc calls auto-switch channel enable automatic channel switching on reception of dsc calls with subsequent communication channel information, while the radio is not engaged (for calls other than individual station calls of category distress or urgency). On (default) off - lck...
Page 51: Phone Book
Chapter 2: operation phone book 41 22222 operation phone book use the phone book when making a dsc call. You can enter up to 50 contacts. A contact has the following details: • name (up to 20 characters) • type (ship, group or coast station) • mmsi number • channel • position auto acknowledge (yes o...
Page 52
Chapter 2: operation 42 phone book adding a contact to the phone book to add a contact to the phone book do as follows: 1. Press the soft key phbook. If it is not in the display, press the soft key more until phbook appears in the display. 2. Press the soft key add. 3. Press the selector wheel knob ...
Page 53: Editing A Contact
Chapter 2: operation phone book 43 22222 operation editing a contact 1. Press the soft key phbook. If it is not in the display, press the soft key more until phbook appears. 2. Press the soft key edit. 3. Press and turn the selector wheel knob to browse through the details of the contact. 4. Continu...
Page 54: Loudhailer With Talk-Back
Chapter 2: operation 44 loudhailer with talk-back loudhailer with talk-back the sailor 6215 vhf dsc supports a loudhailer with a talk-back function. To activate the loudhailer do as follows: 1. Press the soft key hail. If it is not in the display, press the soft key more until hail appears. 2. Press...
Page 55: Automatic Foghorn
Chapter 2: operation automatic foghorn 45 22222 operation automatic foghorn the sailor 6215 vhf dsc has an automatic fog horn application with several foghorn patterns. Once started, it runs in the background while running any other application. The fog horn may be combined with the loudhailer talk-...
Page 56: Foghorn Test Tone
Chapter 2: operation 46 automatic foghorn 2. Use the selector wheel knob to browse through the patterns available. 3. Press the selector wheel knob at the wanted pattern to accept the pattern. 4. To deactivate the foghorn, turn the selector wheel knob to browse to off and press the selector wheel kn...
Page 57: Hailer and Fog Horn Setup
Chapter 2: operation hailer and fog horn setup 47 22222 operation hailer and fog horn setup to change a setting in the hailer/foghorn setup, do as follows: 1. Press the soft key setup. If it is not in the display, press the soft key more until setup appears. 2. Press the arrow soft key or to advance...
Page 58: Replay Function
Chapter 2: operation 48 replay function replay function replay allows the operator to playback received voice messages in the loudspeaker. Recording is activated automatically when a signal is received. Recording is not possible during playback. Up to 60 tracks or 90 seconds can be handled. The reco...
Page 59: Installation
49 chapter 3 33333 installation installation 3 in this chapter you find information and guidelines for: • unpacking the sailor 6215 vhf dsc • installing the vhf radio • power, vhf antenna and external equipment unpacking the sailor 6215 vhf dsc the following items are included in the delivery of a s...
Page 60: Installing The Vhf Radio
Chapter 3: installation 50 installing the vhf radio installing the vhf radio you can mount the vhf radio as a desktop, overhead or flush-mounted unit integrated in the instrument panel. Provide space enough to access the front panel connectors and for installing a cradle for the speaking device. Pro...
Page 61: Desktop Mounting
Chapter 3: installation installing the vhf radio 51 33333 installation sailor 6215 vhf dsc with u mounting bracket the mounting bracket and two knobs are included in the delivery. Desktop mounting.
Page 62: Overhead Mounting
Chapter 3: installation 52 installing the vhf radio overhead mounting.
Page 63
Chapter 3: installation installing the vhf radio 53 33333 installation mounting with u mounting bracket to mount the vhf radio as tabletop, do as follows: 1. Find a suitable location for the vhf radio. Check that the space is wide/deep enough to accommodate the vhf radio. 2. Fasten the bracket with ...
Page 64
Chapter 3: installation 54 installing the vhf radio sailor 6215 vhf dsc for flush mount you can mount the vhf radio to a flat surface, e.G. An instrument panel. The flush mount installation kit is included in the delivery. Important the scaling in the above drawing is not 1:1. Consequently do not at...
Page 65
Chapter 3: installation installing the vhf radio 55 33333 installation 1. Find a suitable location for the vhf radio. Check that the space is deep enough to accommodate the vhf radio and an additional min. 120 mm space for cable entry. 2. Keep free distance to allow free air circulation around the v...
Page 66: Sailor 6202 Handmicrophone
Chapter 3: installation 56 installing the vhf radio sailor 6202 handmicrophone handmicrophone with spiral cable and ptt button..
Page 67: Acc Connector
Chapter 3: installation power, vhf antenna and external equipment 57 33333 installation power, vhf antenna and external equipment 1. Acc connector for accessories 2. Ctrl connector for control speaker microphone 3. Power, loudhailer, foghorn and external speaker 4. Vhf antenna 5. Ground stud acc con...
Page 68
Chapter 3: installation 58 power, vhf antenna and external equipment 3 nmea out- white 4 nmea out+ green 5 mike 2 yellow 6 ear 2 grey 7 hook_ptt pink 8 battery supply when radio is on red 9 internal gnd = - battery black 10 internal gnd = - battery orange — screen (drain) pin description wire color.
Page 69: Nmea Interface Description
Chapter 3: installation power, vhf antenna and external equipment 59 33333 installation nmea interface description the nmea interface supports nmea 0183 v2.0, v2.1 and v2.3. Nmea interface specifications nmea input: impedance: 600 ohm max. 2ma at min. Level of 2v nmea output load impedance: > 60 ohm...
Page 70
Chapter 3: installation 60 power, vhf antenna and external equipment the following sentences are supported: • fsi: all fields are decoded. • gga: utc, "position", "quality indicator" (indicators 1-5). All other fields are unused. • gll: utc, "position", "status" and "mode" (indicators a and d). All ...
Page 71
Chapter 3: installation power, vhf antenna and external equipment 61 33333 installation ctrl connector for control speaker microphone connector type: circular connector, 12pin. Pin assignment: connector front view on the vhf radio: pin description pin description 1 gnd for cable screen 7 internal gn...
Page 72
Chapter 3: installation 62 power, vhf antenna and external equipment power, loudhailer, foghorn and external speaker use the connector marked pwr/ext to connect power, loudhailer and an external speaker. The cable for this connector is part of the delivery. 1. Blue wire: power - 2. Red isolation on ...
Page 73: Vhf Antenna
Chapter 3: installation power, vhf antenna and external equipment 63 33333 installation protection against water ingress vhf antenna use the connector marked ant to connect the vhf antenna to the radio with a 50 ohm coaxial cable with low loss, e.G. Rg214. Install a pl259 plug at the cable end. Plac...
Page 74: System Setup
Chapter 3: installation 64 system setup system setup to change a setting in the system setup, do as follows: 1. Press the soft key setup. If it is not in the display, press the soft key more until setup appears. 2. Press the arrow soft key or to advance to system setup. 3. Turn the selector wheel kn...
Page 75
Chapter 3: installation sailor 6201 handset cradle (optional) 65 33333 installation sailor 6201 handset cradle (optional) this handset has a hook-on/off function, which is activated by a small magnet embedded in the cradle. The cradle must be installed as illustrated in order to ensure the hook-on/o...
Page 76
Chapter 3: installation 66 sailor 6201 handset cradle (optional).
Page 77: Service & Maintenance
67 chapter 4 44444 service & maintenance service & maintenance 4 contact for support contact your authorized dealer for technical service and support of the vhf radio. Before contacting your authorized dealer you can go through the troubleshooting guide to solve some of the most common operational p...
Page 78: Dsc Self Test
Chapter 4: service & maintenance 68 maintenance dsc self test to run a control routine dsc self test, do as follows: 1. Press the soft key setup. If it is not in the display, press the soft key more until setup appears. 2. Press the arrow soft key or to advance to dsc setup. 3. Turn the selector whe...
Page 79: Troubleshooting Guide
Chapter 4: service & maintenance maintenance 69 44444 service & maintenance troubleshooting guide action symptom remedy the radio will not turn on the display is empty. Check if power is present. Check fuse which is placed in the + supply wire. Check performance of power supply if connected to one. ...
Page 80
Chapter 4: service & maintenance 70 maintenance dsc routine testing check the dsc function regularly. Verify the complete dsc installation, with antennas, by transmitting a safety test call to another station (coast or ship). The test call is generated using the dsc call flow via menu call. The call...
Page 81
Chapter 4: service & maintenance maintenance 71 44444 service & maintenance radio time dsc logs are sorted with wrong time stamp or radio time is incorrect a wrong radio time indication should occur only if gps position source is not connected or providing correct time data. A valid gps time signal ...
Page 82
Chapter 4: service & maintenance 72 maintenance device failure if any of the checks and tests described in this section do not assist in resolving the difficulties experienced in the operation and/or performance of the vhf installation, a fault may have developed in the vhf radio itself. When contac...
Page 83
Chapter 4: service & maintenance maintenance 73 44444 service & maintenance replacing the fuse in the red wire (power +) one fuse is installed in the supplied dc cable. If the fuse is blown, track down why the fuse was blown and solve the problem. To replace the fuse, do as follows: 1. Hold both end...
Page 84: Equipment and Accessories
Chapter 4: service & maintenance 74 equipment and accessories equipment and accessories sailor 6209 accessory connection box you can use the sailor 6209 accessory connection box to combine gps (nmea), gps/ais dsc modem and the sailor 6201 handset option. The wire terminal blocks are connected in par...
Page 85: Technical Specifications
75 appendix a aaaaa technical specifications technical specifications a t item specification weight sailor 6215 vhf dsc approx. 1.2 kg weight sailor 6215 vhf dsc and handmicrophone approx. 1,5 kg including sailor 6202 handmicrophone and mounting bracket dimensions height: outer dimension 106 mm, hol...
Page 86
Appendix a: technical specifications 76 item specification number of p channels the radio may be programmed with up to 40 private channels that can be managed in all channel modes. Transmit power hi/lo: 25 w and rf output power 25 w +0 db / - 1.5 db 1 w +0 db / - 1.5 db modulation 25 khz 12.5 khz 16...
Page 87: Nmea Data Rates and Formats
Appendix a: technical specifications 77 aaaaa technical specifications nmea data rates and formats item value 62162-1 4800,8,n,1 (in/out) 62162-2 38400,8,n,1 (out only).
Page 88
Appendix a: technical specifications 78.
Page 89: Maritime Channels
79 appendix b bbbbb maritime channels maritime channels b international channels l) 1 w tx power *) channel 87 and 88 became simplex channels following the introduction of ais1 at 161.975 mhz and ais2 on 162.025 mhz. These are the default channels. Additional narrowband channels can be enabled, see ...
Page 90: Us Channels
Appendix b: maritime channels 80 us channels l) 1 w tx power. Channels 13, 67 and 77 are limited to low transmission power. B) channels 2, 3, 4, 60, 61, 62, 64, 75 and 76 cannot be selected in us mode. !) channels 21a, 22a, 23a, 81a, 82a and 83a may be legally used in some circumstances but not by t...
Page 91: Ca Channels
Appendix b: maritime channels 81 bbbbb maritime channels ca channels l) 1 w tx power. Channels 15, 17, 20, 65, 66, 75, 76 and 77 are limited to 1 w transmission power. !) channels 4a, 6, 19a, 21a, 22a, 61a, 62a, 63a, 67, 72, 73, 81a, 82a and 83a may be legally used in some circumstances but not by t...
Page 92: Bi Channels
Appendix b: maritime channels 82 bi channels l) 1 w tx power on channels 6, 8, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74 and 77. B) channels 75 and 76 cannot be selected in bi mode. *) channels 87 and 88 became simplex channels following the introduction of ais1 at 161.975 mhz and ais2 on 162.025 mhz. ...
Page 93: Declaration of Conformity
83 appendix c ccccc declaration of conformity declaration of conformity c the sailor 6215 vhf dsc is certified as stated in the “declaration of conformity with r&tte directive, enclosed in copy on the next page..
Page 94: Thrane & Thrane A/s
Appendix c: declaration of conformity 84 r & tte doc. No tt99-129855-d thrane & thrane a/s declaration of conformity with r&tte directive the undersigned of this letter declares that the following equipment complies with the specifi ca- tions of ec directive 1999/5/ec concerning radio & telecommunica...
Page 95: Glossary
85 glossary ddddd glossary glossary d a acc accessories ais automatic identification system, a short range coastal tracking system used on ships and by vessel traffic services for identifying and locating vessels by electronically exchanging data with other nearby ships. Atis automatic transmission ...
Page 96
Glossary 86 n nmea national marine electronics association, specification for communication between marine electronic devices p ptt push to talk pwr power r rmc nmea sentence, version of essential gps position, velocity, time data. U utc coordinated universal time. The international atomic time (tai...
Page 97: Index
87 index eeeee index index e numerics 16/c, 12 90 s replay, 48 a acc connector, 57 accessories, 74 acknowledgement, distress, 26 action line, display, 3 activate foghorn, 41, 45 scan resume, 21 scanning, 19 watch, 18 add, 42 add a contact, 42 adjust squelch, 9 adjusting speaker volume, 6 alt, 82 alt...
Page 98
Index 88 channels bi, 82 ca, 81 international, 79 primary, 14 private, 15 us, 80 weather, 14 comm inactivity, 39 compass safe distance, 50 configuration system example, 4 conformity, 83 connector acc, 57 ant, 63 ctrl, 61 external speaker, 62 foghorn, 62 loudhailer, 62 vhf antenna, 63 contact, 67 add...
Page 99
Index 89 eeeee index e editing a contact, 43 emergency calls, iv enter position manually, 8 error messages, 67 external speaker cabling, 62 connector, 62 f factory defaults, 64 flush mount, 54 fog, 45 foghorn, 1, 45, 46 activate, 41, 45 connector, 62 patterns, 1 test tone, 46 foghorn frequency, setu...
Page 100
Index 90 low power override, 17 low power, overriding, 17 m manual, document number, i maritime channels, 79 mayday, iv message replay, 48 mmsi change, 64 mmsi number reviewing, 8 more, 10 mounting, 50 flush mount, 54 with mounting bracket, 53 multiple calls, dsc, 37 mute speaker, 9 n name, 15 name ...
Page 101
Index 91 eeeee index r radio call making, 13 receiving, 13 radio channel, loudhailer, 44 received distress calls, 28 replay, 1, 48 button, 2 reset to default, 64 resume time, 21 review mmsi number, 8 rf exposure hazards, iii rtte, 83 run dsc self test, 40 s safety summary, iii salt deposits, 67 scan...
Page 102
Index 92 system configuration example, 4 system setup, 64 t tag, 19 remove, 19 talk back, 47 technical data, 75 temperature operational, 75 storage, 75 testing, foghorn, 46 time out non distress, 39 timeout, 64 distress, 39 vhf and other non distress, 39 triple watch, 21 change to dual, 18 u us, 80 ...
Page 104
Info@thrane.Com • www.Thrane.Com 98-128471-thr-e.