1. DL manuals
  2. Sailor
  3. Security System
  4. H412
  5. User & Installation Manual

Sailor H412 User & Installation Manual

Manual is about: Iridium Ship Security Alert System

Summary of H412

  • Page 1

    User & installation manual sailor h4122 iridium ship security alert system.

  • Page 2: Introduction

    Introduction thank you for choosing our equipment and congratulations on your new iridium ship security alert system. We hope everything has been delivered correctly and to your satisfaction. In order to get the maximum performance and radio survey approval of your new iridium ship security alert sy...

  • Page 3: Abbreviations

    1 0424 abbreviations gps global positioning system html hyper text markup language http hyper text transfer protocol (world wide web protocol) sim subscriber identification module sms short message service ssas ship security alert system its iridium tracking system contents introduction ...............

  • Page 4: System Overview

    2 0424 system overview 39285 button box ssas box iridium iridium gateway e-mail, sms iridium system iridium satellite system button box alert test the system has full global radio coverage. Covers a1, a2, a3 and a4 areas. The iridium ssas box will send an alert sms/email when the alert button is pre...

  • Page 5: Operating -

    3 0424 operating - how to use the ssas normal mode in normal mode the system is in stand-by. It is possible to use the iridium transceiver for normal usage (voice or data). Data applications on a pc can be used by connecting the data cable to the pc port on the iridium ssas box. See “connecting a pc...

  • Page 6: Test Mode

    4 0415 deactivating the alert the alert can be deactivated in two ways. Either by pressing the test button or by sending an sms message to the system. Press the test button to deactivate the alert the green light will turn off when the alert is deactivated. A message will be send to the recipients t...

  • Page 7: Iridium Tracking System

    5 0625 iridium tracking system with the iridium tracking system the ssas control unit can send information about the ships position. There are two ways to get the position information: automatic its automatic its mode is set and enabled at the configuration page. In this mode the ssas unit will send...

  • Page 8: Installation

    6 installation technical specification input voltage: 10 – 32 vdc current consumption: max. 300 ma operating temperature: -15 to +55 degree celcius interfaces: pc data port: rs232, 19200 baud iridium data port: rs232 gps input: nmea 0183 version 2.20 and 2.30 following nmea messages are supported: g...

  • Page 9

    7 dimensions and drilling plan iridium ssas box 4 pcs. ø6 drilling plan 39284 185 14.85 239 9.75 258.5 225.4 49 mounting 39286 * free space for mounting, ** free space for cable entry. * 50 * 50 ** min. 100 * 50 iridium ssas alert button box / ssas test button box 91 91 28 19.5 52 60 15.5 37 23.5 12...

  • Page 10: System Block Diagram

    8 system block diagram 230/115v ac input backup power 24v dc 39282a 24v dc antenna unit max. Cable loss 3db iridium iridium control handset iridium transceiver unit above deck below deck cable length max. 10m. Iridium ssas box alert button box l1 test button box l1 cable length max. 50m. Alert butto...

  • Page 11: Interfaces

    9 interfaces gps input connector type: 3 pole push connector pin: name: function: specification: 1 nmea+ gps positive terminal rs422* galvanic isolated via optocoupler 2 nmea- gps negativ terminal rs422* galvanic isolated via optocoupler 3 ref reference ground or reference from the gps *) according ...

  • Page 12: Cable Connection Diagram

    10 cable connection diagram 39288a x15 x5 x13 x11 x12 dc + dc − dc − nmea + nmea − ref cnt led ref cnt led ref cnt led ref u7 x1 x2 24v dc power in gps input alert button box 1 ref f1 fuse 1af status indicator iridium interface pc interface led cnt alert button box 2 test button box cnt led ref cnt ...

  • Page 13: Connection Scheme For Push

    11 connection scheme for push terminals 39287 alert 1 alert 2 test gps power ref cnt led nmea + nmea - bat - bat + 10 -32v dc dc + dc - nmea + cnt nmea - led ref ref led ref cnt led ref cnt led ref cnt led ref cnt cable dimensions cable for buttons 2 x 2 x 0.5mm 2 twisted pair and shielded cable for...

  • Page 14

    12 there are several tcp/ip protocol installed. You can ignore the ones that have “dial-up” in the name associated with an internet service provider. In this example, the tcp/ip protocol associated with the 3com lan network card has been selected. Click on the properties button, select the ip addres...

  • Page 15

    13 configuration parameters range default value description email address lenght: max 25/50 chars 25 chars ship's name mmsi number course over ground speed over ground system info max 20 chars ship’s name max 10 digits ship identification number max 7 digits international maritime organisation numbe...

  • Page 16: Status and Message Log

    14 status and message log status log a status log is maintained in the iridium ssas box to provide information to the user about failed connections to the gps and the iridium transceiver. The status log stores the last 10 registered failed connections. The information for each registration is: date,...

  • Page 17: Trouble Shooting

    15 0424 trouble shooting the status led on the iridium ssas box will flash in case the communication with the gps or the iridium transceiver fails. (refer cable connection) slow flashing: no contact with iridium transceiver unit fast flashing: gps signal is missing or the check sum is wrong factory ...

  • Page 19: Parts List

    Parts list name part no. Main units sailor h4122 iridium ssas box 8041220006 data cable 3m, 9 poles d-sub – male/female for connection to pc 56.171 optional h4125 iridium ssas alert button box 8041250206 h4126 iridium ssas test button box 8041260206 sailor n163s ac/dc power supply, blackgrey 8011941...

  • Page 20

    Thrane & thrane a/s • info@thrane.Com • www.Thrane.Com b4122gb0 issue: g/0625.