Sailor RT5022 Operation Manual - Introduction
ii
Introduction
Congratulations on your new SAILOR RT5022 VHF
SAILOR marine equipment is specially designed for the extremely rugged conditions on bord
a ship, based on more than 50 years experience with all kinds of vessels , from small
pleasure crafts, over fishing vessels working under all climatic conditions, to the biggest
ships.
SAILOR
®
is one of Europe’s leading manufacturers of maritime radiocommunication
equipment - a position which has been maintained by means of constant and extensive
product development. We have a worldwide network of dealers with general agencies in
more than 80 countries. All our dealers are specially trained to service all your SAILOR
®
products.
About this manual
This manual is for the daily user of the system. Additionally, it includes a section on the
installation procedures, and - on page ii - standard distress procedures. We highly recom-
mend you to read the manual before you start using the equipment.
Notice: There may be some minor differences in the graphic layout of the manual compared
to the physical device.
Abbreviations used in this manual
ADDR
Address
BI
Channel mode when sailing on European rivers
BQ
DSC Call Acknowledgement Reply
CU
Control Unit
DSC
Digital Selective Calling
DW
Dual Watch
EOS
DSC End Of Sequence
GMDSS
Global Maritime Distress and Safety System
MMSI
Maritime Mobile Service Identification
PTT
“Push To Talk” button
RQ
DSC Call Acknowledgement Request
RX
Receive/r
SQ
Squelch
TX
Transmit/ter
UTC
Coordinated Universal Time
Please note
Any responsibility or liability for loss or damage in connection with the use of this product and
the accompanying documentation is disclaimed. The information in this manual is furnished
for informational use only, is subject to change without notice, may contain errors or
inaccuracies, and represents no commitment whatsoever. This agreement is governed by
the laws of Denmark.
Doc. No.: B5022GB0
Issue: PRELIMINARY, 0505