Sailor RT5022 Operation Manual - Installation
50
Installation
0505
10 Technical specification
General
Normal channels
All int. channels.
Up to 30 private channels in 3 separate banks designated
F,P or L. Each bank contains 10 private channels.
US channels
All US channels according to Radio Regulations.
BI channels
All BI channels according to Radio Regulations.
Channel spacing
25 KHz
Operation modes
Simplex /Semi-duplex
Modulation
G3EJN for Telephony
G2B for DSC.
Frequency stability
less than ± 3 ppm
Aerial connectors
Standard 50 ohm female SO239
Temperature range
-15°C to +55°C
Supply voltage
12V to 24V DC nominal
Maximum supply voltage
range
10.8V to 31.2V DC
Transceiver dimensions
H*W*D 100*200*210 mm
Transceiver weight
3.6 Kg
Receiver
Standard frequency range
155.50 – 162.55 MHz
Optional frequency range
149.30 – 163.75 MHz
Sensitivity for 20 dB SINAD
CCITT weighted
less than -121 dBm or 0.20 ìV p.d.
AF rated Power
Internal L.S.
5 Watt in 8 ohm
Output for External L.S.5 Watt in 8 ohm
Distortion
less than 5 %
S/N ratio
more than 43 dB
Spurious emission
less than 0,25 nW
Spurious response rejection
more than 74 dB
Intermodulation response
more than 73 dB
Co- channel rejection
better than –10 dB
Adjacent channel selectivity
more than 74 dB
Blocking level
more than 94 dBìV
Transmitter
Standard frequency range
155.50 – 157.50 MHz
Optional frequency range
149.30 – 163.75 MHz
RF output power
High
25W +0dB to –0.5dB
Low
0,85 W +0.5dB to –1dB
Adjacent channel power
less than 75 dB
Conducted spurious emission less than 0.1 nW
Distortion
less than 5 %
S/N ratio
better than 46 dB