Sailor SP3300 Operation Manual - page 5

3

0438

On/Off (1)

Press  to turn the radio on. To turn off, press

and hold the key for approximately 2

seconds. This is to avoid accidental power

off.

Hi/Lo (2)

Toggles between high and low transmit

power (see specification section). Use the

low setting over short ranges to preserve

battery life.

VOL - Volume (4)

SQ - Squelch (5)

Press to select Volume or Squelch mode

then use the 

 and 

 keys to adjust the

level.

The display will show “VOL” or “SQL” for 3

seconds - if 

 / 

 are not pressed within

this time, their function will revert to channel

select.

 / 

 (6 & 7)

These keys will change the selected

channel.  Pressing VOL, SQ or 

, then 

 /

 within 3 seconds will adjust the volume,

squelch or backlighting level respectively.

The bargraph will indicate the level selected.

SCAN mode (8)

Scans through the channels stored in the

channel memory (display shows MEM

SCAN).

•

Select channel and press twice to add/

delete to memory scan (display shows

ENT or DEL respectively). The 

❑

 icon

indicates that the selected channel is

included in memory scan.

•

Press and hold until double beep

sounds to scan all channels (display

shows SCAN).

•

Press and hold until triple beep sounds

to inhibit/enable selected channel from

scan (display shows INH or ENA

respectively).

The - icon indicates the selected

channel is inhibited

a.

Bar graph -

Power up

Battery level

Standby

Battery level

Transmit

Battery level

Volume Mode

Volume level

Squelch Mode Squelch level

pressed

Backlight level

b

Personal Channel indicator

c

Channel selected

e

High or Low power indicator

f

Function indicator

g

Selected channel stored in momory

h

Channel inhibited from scan

i

Scan mode selected

f

g

h

i

a

b

c

d

e