Sailor SP3300 Operation Manual - Keypad Lock

5

0451

Keypad Lock

The radio keypad can be locked to prevent

accidentally pressing keys while in a pocket etc.

To lock the keypad, press and hold the Hi/

Lo key. The radio will beep twice and any

key pressed will not function - LOCK will

appear in the display.

To disengage keypad lock, press and hold

Hi/Lo again.

Note that the PTT key will still function when

the keypad lock is on, allowing transmission

and receiving as normal.

Removing and

Attaching Battery

The radio has two battery options - an

850mAh NiCa or a non rechargeable Lithium

battery that is capable of providing sufficient

power for the specified 8 hours according to

regulations.

To remove the battery, lift the two locking

clips holding the battery pack in place. When

reattaching, ensure the three locating pegs

on the top of the battery are located into the

slots in the radio and that the two locking

clips have both engaged.

The set is fully waterproof even with the

battery removed, but it is recommended that

any moisture on the top of the battery or in

the battery compartment is wiped clear

before attaching to prevent the water

creating a conductive path between the

contacts and reducing battery life.

Charger Options

The radio can be supplied with a 12V

standard charger that will accept the whole

radio, or the battery alone. The standard

charger runs from a standard 12V supply

(10.5V-16V), or from AC mains with an

appropriate optional adapter / power supply.

Charging with the standard charger takes

approximately 14-16 hours. There is also a

fast charger available which will charge the

battery within 1 1/2 hours.

Battery pack removal

Battery charger