Saivod STE84C User Manual - Installation
11 / 80 EN
Dryer / User Manual
3
Installation
Before the calling the nearest Authorized Service for the
installation of the dryer, ensure that electrical installation
and water drain is appropriate referring to the user's
manual.
(See 3.4 Connecting to the drain and 3.6
Electrical connection)
If they are not suitable, contact
a qualified electrician and technician to make necessary
arrangements.
C
Preparation of the dryer's location as well as
the electrical and waste water installations is
under customer's responsibility.
A
Prior to installation, visually check if the dryer
has any defects on it. If the drier is damaged,
do not have it installed. Damaged products
cause risks for your safety.
3.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
•
Operate your dryer in a well ventilated, dust-free
environment.
•
The gap between the dryer and the surface should
not be reduced by the materials such as carpet,
wood and tape.
•
Do not cover the ventilation grills of the dryer.
•
There must not be a lockable, sliding or hinged
door that may block the opening of the loading
door in the place where your dryer is to be
installed.
•
Once the dryer is installed, it should stay at the
same place where its connections have been
made. When installing the dryer, make sure that
its rear wall does not touch anywhere (tap, socket,
etc.).
•
Place the dryer at least 1 cm away from the edges
of other furniture.
•
Your dryer can be operated at temperatures
between +5°C and +35°C. If the operating
conditions fall outside of this range, operation of
the dryer will be adversely affected and it can get
damaged.
•
The rear surface of the tumble dryer shall be
placed against a wall.
B
Do not place the dryer
on the power
cable.
3.2 Removing the transportation
safety assembly
A
Remove the transportation safety assembly
before using the dryer for the first time.
•
Open the loading door.
•
There is a nylon bag inside the drum that contains
a piece of styrofoam. Hold it from its section
marked with
XX XX
.
•
Pull the nylon towards yourself and remove the
transportation safety assembly.
A
Check that no part of the transportation safety
assembly remains inside the drum.
3.3 Under counter installation
•
This product can be installed under a counter if the
height of the counter is sufficient.
A
CAUTION:
While using the under counter
dryer, never operate the dryer without under
counter installation part.
Dryer Depth
60 cm
54 cm
Stock number of under-
bench installation part
2979700200
2973600200
•
Leave at least 3 cm of space around the sides and
the rear wall of the product when installing it under
a counter or in a cupboard.