Salcom 12-38-0000 Product Manual - page 12
P a g e
| 11
12-38-0000 VHF AND UHF TRANSCEIVER
Product Manual
Sea Air and land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
April 2017
Technical Specification
Power Supply
13.8V DC
RF Frequency
VHF: 136 - 174 MHz
UHF: 440 - 470 MHz
Output Power
Variable up to 5W ± 1dB 50Ω
(with quarter wave whip antenna with a gain of 2.14dBi)
Channel Spacing
6.25kHz, 12.5kHz or 25kHz
Modulation
FSK & True FM for Audio
Audio Modes
Analogue FM transmission and reception
Receiver Sensitivity
Better than -119dBm @ 1kHz, 12kHz SINAD
Audio Conditioning
300Hz ---- 3kHz passband software defined pre-emphasis
DTMF and CTCSS (<300Hz)
Muting
Software defined muting level
Spurious Emissions
-36dBm max
Serial Input / Output
9600 baud no parity, 8 data bits, 1 stop bit
Discrete Inputs
10 digital and 4 analogue (4 ---- 20 mA)
(Expandable to any number required)
Discrete Outputs
10 digital and 4 analogue (4 ---- 20 mA)
(Expandable to any number required)
Baud Rate
512 or 1200 baud
Message Format
POCSAG
Transmit Duty Cycle
Up to 100%
Aerial Connection
BNC
Operating Temperature
-10 to +50degC
Enclosure
Dimensions: 77mm x 101mm x 30mm.
Material:
Extruded aluminium case
Environmental Protection
Requires protection from weather
Type Approvals
USA - FCC Pt 90.203