Salt Dogg WB400 Assembly Instructions - page 3
Other manuals for WB400:
Assembly Instructions
of
4
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
CAM
STOP POSITION
3.
Insert L-shaped portion of rod into guide plates
as shown on hopper. Tilt handle assembly up to
hopper as shown in fig 3 aligning bolt holes using
supplied bolts, nuts, lock washers and washers
fasten handle assembly to hopper. Adjust and
tighten handle (3/32" allen key) for flowgate.
4.
Loosen wing nut, rotate cam to desired stop
position and re-tighten wing nut.
Fig. 3
Fig. 4