Model 405 weighing scale user manual awt35-000053 issue a.
©avery berkel limited 2006. All rights reserved. The information contained herein is the property of avery berkel limited and is supplied without liability for errors or omissions. No part may be reproduced or used except as authorised by contract or other written permission. The copyright and the f...
Model 405 user manual contents warnings ............................................................................................................................... 6 setting up the scale ................................................................................................................
Model 405 user manual warnings safe installation safety the equipment contains no user serviceable components. Installation and maintenance of the equipment must only be carried out by trained and authorised personnel. Electrical installation the mains lead must be connected to a supply outlet with ...
Model 405 user manual setting up the scale to set the scale up for operation, please refer to the following illustration while performing the steps below. X 1. To level the scale, adjust the feet on the underside of the scale. 2. The salter 405 is powered by a rechargeable battery or 12v power adapt...
Model 405 user manual manual symbols short key press multiple key press long key press scale operation turning on and zeroing the scale zero 0 turning off the scale selecting unit of measure kg g lb chg ac zero 0 oz net kg → g → oz →lb kg/lb t 8.
Model 405 user manual using the tare 1. Zero 0 net 2. Zero 0 net 3. Zero 0 net 4. Zero 0 net kg/lb t removing the tare zero 0 kg/lb t 9.
Model 405 user manual setting up the auto-off function before beginning, the scale must be switched on. 1. Kg/lb t + kg g lb chg ac zero 0 oz net 2. Kg/lb t 0-9 minutes (0 switches function off) 3. Kg g lb chg ac zero 0 oz ne t calibration to calibrate, switch off the scale. 1. Kg/lb t + kg g lb chg...
Model 405 user manual error messages error message definition required solution 0¯ ¯ ¯ ¯: weight above range for calibrated zero point remove load before zeroing, -or- recalibrate the scale. 0_____: weight below range for calibrated zero point remove load before zeroing, -or- recalibrate the scale. ...
Model 405 user manual 12.
Model 405 user manual declarations of compliance united states this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equip...