Salton SB600E Instructions And Warranty - page 7
7
Before storing the blender between uses, clean the unit thoroughly by doing the
following:
o Remove the jug from the motor base by turning the jug in a clockwise
direction.
o Unscrew the blade assembly from the plastic jug by turning the blade
assembly in an anti-clockwise direction
o Remove the rubber seal from the blade assembly
o Wash the blender lid, measuring cup, rubber seal, blade assembly and
plastic jug in warm soapy water. Rinse well in clean warm water.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
It is much easier to clean the accessories directly after they have been used.
Wash them in warm, soapy water, rinse and dry well.
The motor base should be cleaned with a damp cloth. Do not let water enter the
base.
Do not use bleach or other abrasive substances or solvents to clean your
appliance as it can be damaging to the finish.
Do not immerse the motor base in water or any other liquid, or hold it under a
running tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner. Rinse and dry a clean,
dry, soft cloth.
STORING THE APPLIANCE
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the appliance in its box or in a clean, dry place.
Never store the appliance while it is still wet, dirty or hot.
Never wrap the power cord around the appliance, use the cord storage facility in
the base of the unit.