Salus iT500 Instruction Manual - page 36
Other manuals for iT500:
Manual, User Manual, Installer Manual, Installer Manual, User Manual, Installation Manual
of
74
iT500 User Reference Manual
36
Pairing an iT300 with the iT500RX Receiver (optional)
The iT300 is purchased separately. It is only be used if your system supports two central heating zones.
Press
to start sync. count down.
To pair the iT300 to the receiver, insert a paperclip or similar object into
the hole on the left hand side of the iT300 for 2 seconds.
A red light will flash in the top right hand corner of the iT300TX.
With the iT500 Thermostat in Normal mode press and
together for
two seconds. The following will be displayed.
The units will be paired once the count down has finished.