Salus RT510 Installation Manual - page 19
RESET
+Hr
SELECT
SET
SET
Press the for 3 sec to turn the
Holiday Mode OFF.
RESET
+Hr
SELECT
SET
Other Functions
Backlight
The backlight of the RT510 is switched on automatically whenever any of the keys are pressed. The backlight
will remain illuminated for approximately 5 seconds after the last key press, except if you are changing settings
within the Clock, Programme or Temporary Override modes. In this case, the backlight will remain illuminated
throughout the setting change process. The backlight will not illuminate if the RT510 battery is low.
Battery Status
The RT510 checks the battery voltage frequently during normal operation. If the battery voltage is sensed as
being low (this is normally when the battery voltage falls to a level of around 2.6V), the low battery indicator
will be displayed on the screen. You should replace the batteries as soon as possible to prevent any possible
operating problems. When you want to change the batteries your device will use the internal memory to
backup your settings. You have 30 sec to change the batteries before losing your settings.
Sleep Mode
By pressing both the UP and DOWN keys together, the RT510 will enter SLEEP mode. In this mode, all the RT510
functions will be paused to save battery power, with the exception of the clock which will continue to run in
the background.
While in SLEEP mode:
• The LCD display will be blank.
• All output from the Control Unit will be turned off immediately.
Press any key to wake up the RT510 and cancel SLEEP mode.
RESET
+Hr
SELECT
SET
3 sec
3 sec
RESET
+Hr
SELECT
SET
Note:
You can also exit Holiday Mode
by setting the day to zero.
3
4
1
2
3 sec
RT510 Installation Manual 19