1. DL manuals
  2. Sam4s
  3. Cash Register
  4. ER-5100? SERIES
  5. Service Manual

Sam4s ER-5100? SERIES Service Manual

Other manuals for ER-5100? SERIES: Service Manual, Programming & Operating Manual

Summary of ER-5100? SERIES

  • Page 1

    Electronic cash register c o n t e n t s electronic cash register manual 1. Precaution statements 2. Product specifications 3. Installation and operation 4. Disassembly and assembly 5. Alignment and adjustment 6. Troubleshooting 7. Exploded views and parts list 8. Pcb parts list 9. Block diagram 10....

  • Page 3

    About this manual this service manual describes how to perform hardware service maintenance for the sam4s er-5100 series electronic cash register. Notes notes may appear anywhere in the manual. They describe additional information about the item. Precaution symbols . Indicates a safety precaution th...

  • Page 4

    Copyright ⓒ 2004 by shin heung precision. All right reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable from without prior written permission of shin heung precision . Sam4s er-5100 series er-5100 servi...

  • Page 5: Overview of This System Ecr

    Overview of this system ecr this service manual provides the technical information for many individual component systems, circuits and gives an analysis of the operations performed by the circuits. If you need more technical information, please contact our service branch or r&d center. Schematics an...

  • Page 6: 1 Precaution Statements

    Sam4s er-5100 series 1-1 1 precaution statements follow these safety, servicing and esd precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1 safety precautions 1. Be sure that all of the built-in protective devices are replaced. Restore any missing pro...

  • Page 7

    1 precaution statements 1-2 sam4s er-5100 series 1-2 servicing precautions warning: first read the-safety precautions-section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions. Warning: an electrolyti...

  • Page 8: 2 Product Specifications

    Sam4s er-5100 series 2-1 2 product specifications specifications are correct at the time of printing. Product specifications are subject to change without notice. See below for product specifications. 2-1 specifications item description remark ac power source ac 120v, 60hz ac 230v, 50hz usa europe p...

  • Page 9

    2 product specifications 2-2 sam4s er-5100 series 400 305 455 2-2 dimensions.

  • Page 10

    2 product specifications sam4s er-5100 series 2-3 2-3 communication interfaces 2-3-1 serial interfaces and port locations figure 2-1. Rs-232c interface locations 2-3-2 pin descriptions for serial interfaces (optional p.C.B.) figure 2-2. Pin number assignment table 2-1. Pin descriptions and signals o...

  • Page 11

    2 product specifications 2-4 sam4s er-5100 series memo.

  • Page 12: 3 Installation and Operation

    3 installation and operation sam4s er-5100 series 3-1 3 installation and operation this chapter describes the method for installing the ecr system and shows the locations of the various feature items. 3-1 system configuration figure 3-1. Terminal system 3-1-1 terminator specification figure 3-2. Ter...

  • Page 13

    3 installation and operation 3-2 sam4s er-5100 series 3-2 installation waring: when connecting the keyboard to the main pcb, made sure the membrane sheet is shaped as in figure 3-6(a), below. If the membrane is shaped as in figure 3-6(b), the keyboard may malfunction. Figure 3-6. Membrane shape 3-2-...

  • Page 14

    3 installation and operation sam4s er-5100 series 3-3 2 3 1 3 4 5 8 7 6 3-2-2 receipt / journal paper insertion figure3-8 folding paper for insertion figure3-9 inserting the paper figure3-10 inserting the journal paper 1. Using a new roll of paper, unroll the paper about 150mm and fold the paper as ...

  • Page 15

    3 installation and operation sam4s er-5100 series 3-4 3-3-2 mode switch this position of the key in the mode switch determines the action of the secr. Table 3-1 shows the various modes that are available. Table 3-1. Ecr modes mode function void cancel operation off operation stop reg sales operation...

  • Page 16: 4 Disassembly And Assembly

    Sam4s er-5100 series 4-1 front up pulling direction 4 disassembly and assembly this chapter describes the disassembling and reassembling procedures for er-5100, electronic cash registers. Warning: this ecr contains electro-statically sensitive devices. Use caution when handling any components. 4-1 d...

  • Page 17

    4 disassembly and assembly 4-2 sam4s er-5100 series e d e d c f hatched area 4. Turn the upper frame assembly, down and remove the three screws, . Remove the stamp paper guide assembly d, from the upper frame assembly c. Figure 4-3. Stamp paper guide removal 5. Remove the left-side screw, , on the p...

  • Page 18

    4 disassembly and assembly sam4s er-5100 series 4-3 4-2-2 upper case assembly 1. Position the upper case so that the connectors are within reach of the main pcb. Replace the red and the white connectors. 2. Position the upper case on the lower case and replace the three screws ((b-6) and (b-11)) 3. ...

  • Page 19

    4 disassembly and assembly 4-4 sam4s er-5100 series memo.

  • Page 20: 5 Alignment And Adjustments

    Sam4s er-5100 series 5-1 #5 #4 #3 #2 #1 adjustment scale adjustment point bracket p/end slide bracket (set for paper thickness = 0.075mm) 5 alignment and adjustments this chapter describes the methods for aligning and adjusting components in this ecr. 5-1 printer adjustments 5-1-1 head gap adjustmen...

  • Page 21

    5 alignment and adjustments 5-2 sam4s er-5100 series the relationship between the adjustment scale and the paper remnant remaining on the core is as shown in figure 5-3. Remnant of (m): #1 #2 #3 #4 #5 figure 5-3. Relationship: adjustment scale to remnant length note: figure 5-3 applies only when usi...

  • Page 22: 6 Reference Information

    Sam4s er-5100 series 6-1 key input failure specific key failure buzzer malfunction 1. Check the fuse on the main pcb. 2. Check all voltage states. 3. Check/change the related circuit (ic9 ~ic11) on the main pcb. 4. Check whether the printer (erp- 400) is out of order. 1. Check the affected keys and ...

  • Page 23

    6 troubleshooting and test procedure 6-2 sam4s er-5100 series real time clock failure motor, stamp, auto-cutter or paper feed failure receipt/journal paper sensing failure 1. Check whether the printer is out of order. 2. Check whether the harness (cn7~cn9) are disconnected. 3. Check ta1 to ta4 and r...

  • Page 24

    6 troubleshooting and test procedure sam4s er-5100 series 6-3 1. Check/change the solder points and the connection harness of the window display pcb. 2. Check the cn6 connection harness on the main pcb. 3. Check/change the related circuits on the main pcb. 4. Check the hv5812p and the digitron on th...

  • Page 25

    6 troubleshooting and test procedure 6-4 sam4s er-5100 series 1. Check whether the cable is short, open or etc. 2. Check the connection status between the cn19 and the cable. 3. Check the ic4,q15,q16 and the related circuit on the optional pcb. 4. Check the bead wire between the main pcb and optiona...

  • Page 26

    6 troubleshooting and test procedure sam4s er-5100 series 6-5 6-2 change the asic scr60k (ic4) 6-2-1 when change the ic4, follow next procedure if the ic4 or out of order certainly 1. Cut the asic-side end of the top of asic’s pin with a sharp-tip knife, one by one by one carefully. There may be som...

  • Page 27

    6 troubleshooting and test procedure 6-6 sam4s er-5100 series 7. Solder the ic4 one top to bottom with much lead under the pcb erected. 8. Desolder the lead dummy around the end pin of the square using a shield wire of flux liquid. 9. When using flux liquid, after paint the flux liquid and then deso...

  • Page 28

    6 troubleshooting and test procedure sam4s er-5100 series 6-7 use this key for all clear procedure regardless of what key function id programmed at that location cash sbtl check 5 2 00 . 3 6 cash 7 6-3 test procedure 6-3-1 initial clear procedure 1. Turn key to p-mode. 2. Unplug register. 3. Hold do...

  • Page 29

    6 troubleshooting and test procedure 6-8 sam4s er-5100 series memo.

  • Page 30

    Sam4s er-5100 series 7-1 7 exploded views and parts list 7-1 main set 7-1-1 exploded view figure7-1 total disassembly.

  • Page 31

    7 exploded views and parts list 7-2 sam4s er-5100 series 7-1 main set 7-1-2 parts list figure7-2 cover printer assembly 7-1-2-(a) cover printer assembly no. Parts no. Description / specification q`ty design-location serviceable remark a jk97-00141e mea-cover printer 1 n a-1 jk75-10391a mec-lock:er-5...

  • Page 32

    7 exploded views and parts list sam4s er-5100 series 7-3 7-1 main set 7-1-2 parts list figure7-3 case upper assembly 7-1-2-(b) case upper assembly no. Parts no. Description / specification q`ty design-location serviceable remark jk72-40356a pmo-window display:er-5100,standard 1 y jk72-40356b pmo-win...

  • Page 33

    7 exploded views and parts list 7-4 sam4s er-5100 series 7-1 main set 7-1-2 parts list figure7-4 case lower assembly 7-1-2-(e) case lower assembly no. Parts no. Description / specification q`ty design-location serviceable remark e-1 6002-000209 screw-tapping:rwh,+,2,m3,l17.5,zpc(yel), 4 y e-2 jk73-4...

  • Page 34

    7 exploded views and parts list sam4s er-5100 series 7-5 7-1 main set 7-1-2 parts list (continue) 7-1-2-(e) case lower assembly (continue) no. Parts no. Description / specification q`ty design-location serviceable remark e-15 6006-000187 screw-ass'y mach:wt,bh,+,m4,l6 1 y e-16 6002-000174 screw-tapp...

  • Page 35

    7 exploded views and parts list 7-6 sam4s er-5100 series 7-2 printer (erp-400) 7-2-1 exploded view 51 39-4 39-2 39-5 39-1 29-4 39-3 39 51 49 38 40 27 51 36 42 41 39-6 51 28 54 59 60 29 54 32 16-6 16-2 16-1 16-8 16-5 16-4 16-7 16-3 30 14 4 5 51 7 54 15 51 50 51 51 56 2 52 10 55 47 51 17 1 45 52 16 50...

  • Page 36

    7 exploded views and parts list sam4s er-5100 series 7-7 7-2 printer (erp-400) 7-2-2 parts list.

  • Page 37

    7 exploded views and parts list 7-8 sam4s er-5100 series 7-2 printer (erp-400) 7-2-2 parts list.

  • Page 38

    7 exploded views and parts list sam4s er-5100 series 7-9 7-2 printer (erp-400) 7-2-2 parts list.

  • Page 39

    7 exploded views and parts list 7-10 sam4s er-5100 series 7-4 key board 7-4-1 key board (60key) 7-4-1-(a) exploded view figure7-6 key board (60 key).

  • Page 40

    7 exploded views and parts list sam4s er-5100 series 7-11 7-4 key board 7-4-1-(b) parts list no. Code no. Description specification q`ty remark serviceable f jk59-30006a unit-kbd ass'y membrane,60 key:er-5215 1 y f-1 jk72-40230a pmo-kbd housing hips(vo),60 key 1 y f-2 jk81-10286d as-key cap s(1*1) p...

  • Page 41

    7 exploded views and parts list 7-12 sam4s er-5100 series 7-4 key board 7-4-2 key board (90key) 7-4-2-(a) exploded view figure7-7 key board (90 key).

  • Page 42

    7 exploded views and parts list sam4s er-5100 series 7-13 7-4 key board 7-4-2-(b) parts list no. Parts no. Description / specification q`ty design-location serviceable remark f jk59-30004a unit-kbd ass'y: membrane,90 key;er-5240/usa 1 y f-1 jk72-40231a pmo-kbd housing: hips(vo),90 key 1 y f-2 jk81-1...

  • Page 43

    7 exploded views and parts list 7-14 sam4s er-5100 series 7-4 key board 7-4-3 key board (160key) 7-4-3-(a) exploded view figure7-8 key board (160 key) 7-4-3-(b) parts list no. Parts no. Description / specification q`ty design-location serviceable remark f jk59-30016a unit-keyboard,rubber-flat,160key...

  • Page 44

    7 exploded views and parts list sam4s er-5100 series 7-15 7-5 drawer 7-5-1 exploded view a8 a10 a9 a7 b2 b1 b11 b12 b5 b3 b4 b7 b8 b6 b9 a3 a2 a1 a. Ass'y bill-coin (4b8c) b. Ass'y tray-till b10 a4 a5 a6 c. Ass'y housing e. Ass'y bottom d. Ass'y lock e1 e5 e2 e3 e4 e7 e6 e8 d1 d2 d3 d4 d11 d6 d7 d9 ...

  • Page 45

    7 exploded views and parts list 7-16 sam4s er-5100 series 7-5 drawer 7-5-2 parts list 7-5-2-(a) ass’y bill-coin (4b/8c, 5b/5c) no. Code no. Description / specification q`ty design-location serviceable remark jk97-20014a mea-unit bill coin: a-type, 4b8c 1 y a jk97-00407a mea-unit bill coin: a-type, 5...

  • Page 46

    7 exploded views and parts list sam4s er-5100 series 7-17 7-5 drawer 7-5-2 parts list 7-5-2-(c) ass’y housing no. Code no. Description / specification q`ty design-location serviceable remark jk97-01074a mea-cover housing: a-type,basic 1 n c jk97-01074b mea-cover housing: a-type,none hole,option 1 n ...

  • Page 47

    7 exploded views and parts list 7-18 sam4s er-5100 series memo.

  • Page 48: 8   Pcb Parts List

    Sam4s er-5100series 8-1 8 pcb parts list 8-1 main pcb (c.F. 10-1 main pcb diagram) no part-no description / specification q'ty design-location serviceable remark - jk92-01054a 1 basic y - jk92-01054b ass;y pcb er-5100 (europe) 1 clerk key y - jk92-01054c 1 basic y - jk92-01054d ass’y pcb er-5100 (us...

  • Page 49

    8 electrical parts list 8-2 sam4s er-5100 series no part-no description / specification q'ty design-location serviceable remark - 1102-000135 ic-eprom:27c020,256kx8bit,dip,32p,600mil 1 ic5 (er-5140fi) y - 1106-000389 ic-sram:681000,128kx8bit,dip,32p,600mil 1 ic6 y - 1203-000442 ic-posi.Fixed reg.;78...

  • Page 50

    8 electrical parts list sam4s er-5100series 8-3 no part-no description / specification q'ty design-location serviceable remark - jk39-40306c cbf-harness;er-4615fp,ul1007 1 cn9 y - jk39-40550a cbf-harness-jumper;er-350f,wir 1 solder side (ic5 30p~ic4 88p) y - jk68-10232a label(p)-battery;er-4915(crs)...

  • Page 51

    8 electrical parts list 8-4 sam4s er-5100 series 8-2 main auto no part-no description / specification q'ty design-location serviceable remark - jk94-01065a pba man-auto 1 n - 0401-00005 diode-switching;1n4148,75v,300 22 d1,d1~35,d101 y - 0402-000129 diode-rectifier;1n4003,200v,1a 7 d3,d5~9,d14 y - 0...

  • Page 52

    8 electrical parts list sam4s er-5100series 8-5 - 2004-000825 r-metal;12kohm,1%,1/4w,aa,tp,2 2 r6/r8 y - 2005-000210 r-metal;36kohm,1%,1/4w,aa,tp,2 1 r2 y - 2201-000013 c-ceramic,disc;470pf,10%,50v 7 cc3/11/15/16/52/62/63 y - 2201-000021 c-ceramic,disc;100nf,+80-20%,5 10 cc2,4.6.8~10,19 ~20,22,100 y...

  • Page 53

    8 electrical parts list 8-6 sam4s er-5100 series 8-3 clock pcb (c.F. 10-2 clock pcb diagram) no part-no description / specification q'ty design-location serviceable remark - jk92-01062a clock board:er-5100,world 1 y - 2007-000308 r-chip:10ohm,5%,1/10w,da,tp,2012 1 cr5 y - 2001-000477 r-chip:1mohm,5%...

  • Page 54

    8 electrical parts list sam4s er-5100series 8-7 8-5 rear display pcb (c.F. 10-4 rear display pcb diagram) no part-no description / specification q'ty design-location serviceable remark - jk92-01231a pba sub-turret:er-5100/5200,std 1 rear display assy y - - jk39-40002a cbf harness:er-220n,-,ul1061,40...

  • Page 55

    8 electrical parts list 8-8 sam4s er-5100 series 8-7 clock pcb (c.F. 10-2 clock pcb diagram) no part-no description / specification q'ty design-location serviceable remark - pcb-option,e-5100,fr-4,t1.6 1 y - 0501-000399 tr-small signal;ksc945,npn 2 iq1.2 y - 0904-000519 ic-peripheral,82c452a,8bit 1 ...

  • Page 56: 9 Block Diagram

    Sam4s er-5100 series 9-1 cpu asic scr 60k power buzzer reset power paper end sensor r/j printer erp-400 eprom 27c010 (fiscal) eprom 27c010 (fiscal) display/ turret clerk key drawer mode key serial 2 serial1 27010/ 27c020 (program) nterface driver max 232 option board i nterface driver 82c452 / max 2...

  • Page 57

    9 block diagram 9-2 sam4s er-5100 series 1st data byte (1byte) 9th data byte (1byte) 1st data byte (1byte) (display wave form diagram) strobe latch data clock main pcb display / turret pcb ic4 scr60k driver sn75518 10 digits (display) 10 digits (turret) serial data, clock, latch, strobe signal +5v, ...

  • Page 58

    9 block diagram sam4s er-5100series 9-3 ic4 scr 60k ic14 max 232 82c452 ic14 max 232 modular jack d-sub 9 serial comm. Ic4 scr60k controller ic 15 82c452 transceiver ic 4 75176 ic 14 max232 modular comm. Sram. Txd rxd irc+ irc- data add 9-3 serial communications 9-4 irc communications (optional boar...

  • Page 59

    9 block diagram 9-4 sam4s er-5100 series erp-400 9-pin dot matrix r/j printer ic4 (scr 60k) part a receiver timing pulse sensing, guarantee paper sensing, head location sensing part b driver part c control motor, stamp, auto- cutter, recceipt/journal paper feeding, head solenoid driving head solenoi...

  • Page 60

    9 block diagram sam4s er-5100series 9-5 ic4 (asic scr60k) key board (160 / 90 / 60) ic9 74138 ic10 74138 ic11 74138 ca2 / ca3 cn17 mode key switch diode (1n4148) x 20 8 lines 8 lines 8 line (d0 ~ 7) 20 lines 20 lines 20 lines 9-6 keyboard.

  • Page 61

    9 block diagram 9-6 sam4s er-5100 series memo.

  • Page 62: 10 Wiring Diagrams

    Sam4s er-5100 series 10-1 cn1 cn7 cn8 cn9 cn11/12 cn14 cn13 cn15 cn16 cn17 cn10 cn6 cn3 cn2 cn25 cn4/5 cn19 cn18 for transformer pin output blue(3~4) 24v/2a red(5~6) 22v/0.15a for window / turret pin signal pin signal 1 disconn.Chk 5 ground 2 strobe 6 vpp 3 clock 7 vcc 4 latch 8 data in for modular ...

  • Page 63

    10 wiring diagram 10-2 sam4s er-5100 series memo.

  • Page 64

    Sam4s er-5100 series 11-1 11 asic scr60k pin assignments pin no. Name description pin no. Name description 1 rd read 51 int1 cn9 #3 (timing sihnal) 2 rtc real time clock 52 pr1 cn8 #4 (ayto cutter) 3 ram2 chip select 53 pr2 cn8 #8 (motor) 4 ram1 chip select 54 pr3 cn8 #3 (stamp) 5 p2 a16 (for 1m ram...

  • Page 65

    11 asic scr60k pin assignments 11-2 sam4s er-5100 series pin no. Name description pin no. Name description 36 aux1 cn10 #18 (option board 452) 86 ram1_2 ram1 /cs 67 aux2 cn10 #4 (option board 452) 87 rxd option board (rxd) 68 r1 cn10 #19 (option board 452) 88 txd option board (txd) 69 r2 cn10 #3 (op...

  • Page 66: 12 Schematic Diagrams

    Sam4s er-5100 series 12-1 12 schematic diagrams [ schematics sheet content ] 1. Main pcb schematics. 1) power block ------------------------------------------------------- 12-2 2) cpu block -------------------------------------------------------- 12-3 3) memory and power fail block -----------------...

  • Page 67

    12-2 sam4s er-5100 series 4 dat e of 4 3 2 1 ab siz e 3 2 1 b drawn by s heet c title : d c d file name a3 rev shin heung precision co., ltd. Red 1 bl ue vph t r ansf orm e rs er- 5100 mai n. Sch er- 5100 mai n 11 cc1 150pf cm2 100nf vdisp r8 10k r5 47k 140uh coil 1n4148 d1 hs1 h45 100nf cc68 470uf ...

  • Page 68

    Sam4s er-5100 series 12-3 4 dat e of 4 3 2 1 a b siz e 3 2 1 b drawn by s heet c title : d c d file name a3 rev shin h e ung prec is ion c o ., lt d. Nc dr1 cn9 cn8 cn7 2 dr2 cs 0 cc22 100nf cc24 47nf 1n4003 d5 vcc sys- c l k 2 j24( no pop) i/f p a r t rtc_ /c s ra m 1 _ /cs kd 8 kd 6 kd 5 kd 3 kd 2...

  • Page 69

    12-4 sam4s er-5100 sefies 4 dat e of 4 3 2 1 ab siz e 3 2 1 b drawn by s heet c title : d c d file name a3 rev shin heung precision co., ltd. /wr /r d on 3 vph vcc vcc vcc vbt d0 d1 d3 d2 a3 a2 a1 a0 a( 0 :1 5 ) rtc_ /c s ra m 1 _ /cs ra m 2 _ /cs ra m 1 _ /cs /r d ra m 2 _ /cs /r d a0 a2 a3 a5 a6 a...

  • Page 70

    Sam4s er-5100 series 12-5 4 dat e of 4 3 2 1 ab siz e 3 2 1 b drawn by s heet c title : d c d file name a3 rev shin heung precision co., ltd. Bl u /wr a1 d0 d1 in t 1 cs 0 cb2 5 6 a0 d2 vcc cb3 11 1 1 vcc fb42 /r d a2 d6 d5 d3 cs 1 r eset 21 19 22 20 15 13 16 14 9 7 10 8 3 red 4 2 cb1 10 11 7 8 5 6 ...

  • Page 71

    12-6 sam4s er-5100 series 4 dat e of 4 3 2 1 ab siz e 3 2 1 b drawn by s heet c title : d c d file name a3 rev shin heung precision co., ltd. /r d dr2 dr1 ta4 ta3 4 vcc vcc vcc vcc vcc di s _ cl k di s c o n lat c h da -i n a2 a3 a4 a5 a4 a3 a5 a0 a5 2 5 8 d27 1n4148 d24 1n4148 d29 1n4148 d16 1n4148...

  • Page 72

    Sam4s er-5100 series 12-7 4 dat e of 4 3 2 1 ab siz e 3 2 1 b drawn by s heet c title : d c d file name a3 rev shin heung precision co., ltd. Pb7 pb6 pb4 pb3 pa4 pa5 pa7 5 vcc pb2 pb5 pa6 vcc vcc 555_r eset 12.5v_en 8255_/c s /r d /wr d5 d6 d2 d3 d0 pc 5 pc 6 pc 7 pc 2 pc 3 pc 4 pc 0 pc 1 pb5 pb6 pb...

  • Page 73

    12-8 sam4s er-5100 series 4 date of 4 3 2 1 ab si ze 3 2 1 b draw n by sheet c title : d c d file nam e a3 rev shin heung precision co., ltd. E p6 f c p5 g p4 p2 p1 p8 dp p9 g9 g2 g1 g3 g5 g4 g6 g8 g7 g9 g6 g7 g3 g4 g1 blk 1 a com p1_a p3_f p4_g p6_e p7_d p10_h g10 vf1 vcc vfd _lat c h vfd_sclk h p1...

  • Page 74

    Sam4s er-5100 series 12-9 4 date of 4 3 2 1 ab si ze 3 2 1 b draw n by sheet c title : d c d file nam e a3 rev shin heung precision co., ltd. H p1 0 d p7 g p3 a dp p2 b p9 1 e p6 p4 c blk p6_e vf1 p2_b p1_a p1_a p3_f p2_b p5_c p7_d p8_d p p4_g p6_e p5_c g2 sen_dispdiscon g1 p7_d p8_d p blue p3_f g10...

  • Page 75

    12-10 sam4s er-5100 series o o o x 1 v1 o x o x o x a9 a10 a12 a13 a0 a15 a2 a3 d1 d2 d7 d4 d5 a4 /ce a6 a7 r4 1.2k 1mbits ra1 jp1 a14 a15 a11 a12 a8 a9 a5 a6 a2 a3 a0 jk92-00132b o x 512kbits 1mbits a17 /ce d6 d5 d2 d3 d0 2mbit fiscal pcb 1 a8 a11 a14 a1 a16 d0 d3 d6 a5 a17 zd1 1n4735a 6.2v 100nf c...

  • Page 76

    Sam4s er-5100 series 12-11 ccc2 22pf ferrite cbd1 ferrite ccc4 22pf 16 mhz ( to main cpu pin 59(x1) ) ser-65xx use vo 1 xin 2 xout ser-6500 clock cu1 fs741 gnd 5 4 lf 3 ref 8 vcc vi 7 6 1m cr1 100 cr5 cce1 100uf 16v 2.2k cr2 ccc5 22pf ccc1 cx1 0.1uf cr7 vcc cbd2 47k 47k 47k cr8 cr4 cr3 47k cr6 750 c...

  • Page 77

    12-12 sam4s er-5100 series from interface circuit red blu 8mhz from main circuit red blu 15 11 13 7 9 3 5 22 cn22 1 20 16 18 12 14 8 10 6 2 4 vcc vcc 21 17 19 8 6 2 4 icc12 2.2nf 4 vcc ix1 gnd 2 1 nc out 3 vcc 1k ir2 vcc 2 3 1 10k ir1 21 iq2 ksc945-g 17 19 13 15 11 7 9 3 5 9 vcc vcc 3 ifb7 5 10 t2ou...

  • Page 78: Update Log

    Sam4s er-5100 series update log application date page part # notes (cause & solution) s/bulletin use this page to record any special servicing information such as service bulletins or supplements. When possible, record changes to code numbers directly on the actual parts list. Always record service ...

  • Page 80

    ⓒ shin heung precision. March 2004 printed in korea v1.0 code no. : jk68-60918a.