1. DL manuals
  2. Sam4s
  3. Cash Register
  4. SER-7000
  5. Manual

Sam4s SER-7000 Manual

Manual is about: SER-7000 Series

Summary of SER-7000

  • Page 1

    Ser-7000/7040 program manual all specifications are subject to change without notice. V1.01 contact you authorized sam4s/samsung dealer for sales, service and support. Dealer imprint:.

  • Page 2

    Attention the product that you have purchased contains a rechargeable ni-mh battery. This battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials...

  • Page 3: Contents

    Contents getting started 1 g about the s er-7000 series ....................................................................................................... 1g register controls ..........................................................................................................................

  • Page 4

    Ii x getting started ser-7000 program manual wlu key relocation ................................................................................................44 g function key relocation ...........................................................................................46 g system options ...

  • Page 5

    Ser-7000 program manual getting started x iii tray subtotal ............................................................................................................. 57 g void item................................................................................................................... ...

  • Page 6

    Iv x getting started ser-7000 program manual product mix groups ................................................................................................................57 g product mix items ........................................................................................................

  • Page 7: Getting Started

    Ser-7000 program manual getting started x 1 getting started about the ser-7000 series the s er-7000 series is offered in two different versions: x the s er-7000 features a flat 160-position keyboard with 107 nlu keys. Because it offers protection from spills, this keyboard works best in restaurants,...

  • Page 8: Navigating The Ser-7000

    2 x getting started ser-7000 program manual navigating the ser-7000 this chapter explains the conventions used for displaying and entering information. Review the information contained in this chapter before attempting to program your ser- 7000. Default keyboard – ser-7000 46 76 66 56 1 sbtl 3 2 8 3...

  • Page 9

    Ser-7000 program manual getting started x 3 er-7040 keyboard – default 15 nlu configuration the s er-7040 keyboard is shown below with the default legends and key assignments. This configuration has 15 keyboard nlu locations and can be expanded to 40 nlu locations. Programmable key locations are sho...

  • Page 10

    4 x getting started ser-7000 program manual key descriptions essential function keys because the sam4s ser-7000 keyboard is programmable, you can use the default keyboard, you can modify it, or you can design a keyboard that fits your exact needs. In order to program and operate the sam4s ser-7000, ...

  • Page 11

    Ser-7000 program manual getting started x 5 cancel press cancel to abort a transaction in progress. All current items are removed (voided). Cash use cash to finalize or tender cash sales. Change is computed when the amount of cash tendered is greater than the amount of the sale. Check use check to f...

  • Page 12

    6 x getting started ser-7000 program manual enter when programming or selecting from window look-ups, press enter to enter data into a field with the cursor remaining in the field. Err.Corr press err corr immediately after an item to void that item. Fd stmp shift press fd stmp shift to shift the pre...

  • Page 13

    Ser-7000 program manual getting started x 7 misc tend 1-16 press a misc tend key to finalize or tender sales paid by various charges or other media. Tendering may or may not be allowed depending upon function key programming. Misc tend # access any of the 16 possible miscellaneous tender functions b...

  • Page 14

    8 x getting started ser-7000 program manual park order used in conjunction with a kitchen video system and the serve order function key. Enter a number and press park order to park or "suspend" an order on the video monitor until the order is completely filled. In the case of a drive through order t...

  • Page 15

    Ser-7000 program manual getting started x 9 recall check # 1-4 the check tracking system can maintain only balances (hard check) or entire transactions (soft check) in the register memory. Four different tracking files can be separated to maintain, for example: restaurant checks, call-in orders, del...

  • Page 16

    10 x getting started ser-7000 program manual take-out take-out is a subtotal key. Press take-out to record the amount of the transaction in the take-out total on the financial report. Tax calculation can be changed to accommodate different tax rules for take-out sales. Sales cannot be split between ...

  • Page 17

    Ser-7000 program manual getting started x 11 control lock void p z x reg off s mode void off reg x z p s mode use to void (correct) items outside of a sale. The register is inoperable. (register) use for normal registrations. Use to read register reports and perform other manager functions. Use to r...

  • Page 18

    12 x getting started ser-7000 program manual key prompting while you are programming the ser-7000, the bottom line of the screen displays the keys that you are allowed to use next. (these prompts do not display on the operator screen in the reg control lock position, or in manager operations.) for e...

  • Page 19

    Ser-7000 program manual getting started x 13 page up and page down the scroll indicators tell you if the area in which you are working (in this case, general printing options programming area) contains more information than can be displayed at one time. G e n e r a l p r i n t i n g o p t i o n s 1 ...

  • Page 20

    14 x getting started ser-7000 program manual choosing items from menus p - m o d e p r o g r a m m i n g m e n u 1. Plu 2 . P l u s t a t u s g r o u p 3 . G r o u p 4 . F u n c t i o n k e y 5 . S y s t e m o p t i o n 6 . T a x e s e n t e r p a g e u p / d n n p choose an item from the menu in on...

  • Page 21

    Ser-7000 program manual getting started x 15 opening pop-up selection windows 1. The arrow indicates the selections for this field are made from a pop-up window. G e n e r a l f u n c t i o n o p t i o n s b e f o r e t e n d e r n 3 . D e f a u l t d e s t i n a t i n o n e 4 . R o u n d i n g o n ...

  • Page 22

    16 x getting started ser-7000 program manual entering alpha characters you have the option of using the alpha keyboard overlay to enter descriptors (the default method) or you can enter descriptors by entering a three-digit code for each character. See “general function options” in p-mode programmin...

  • Page 23

    Ser-7000 program manual getting started x 17 entering descriptors with the alpha overlay p l u # 0 0 0 0 0 0 0 0 0 0 0 0 0 1 p g m . A l p h a d e s c r i p t o r : plu#1 g r o u p l i n k # 1 0 1 p l u s t a t u s l i n k # 0 1 p i e c e c o u n t 0 0 0 r e c i p e # 0 0 a c t i v a t e w l u # 0 0...

  • Page 24

    18 x getting started ser-7000 program manual alpha code chart for alpha entry by code number char • ¾ © “fs” “tx” ® n p o m code 007 008 009 011 020 021 024 025 026 027 char space ! " # $ % & ' ( ) code 032 033 034 035 036 037 038 039 040 041 char * + , - . / 0 1 2 3 code 042 043 044 045 046 047 048...

  • Page 25: Initial Clear

    Ser-7000 program manual getting started x 19 initial clear caution: do not share this information with unauthorized users. Distribute the special s-mode key only to those you may want to perform this function. The initial clear function allows you to exit any register activity and return to a beginn...

  • Page 26

    20 x getting started ser-7000 program manual.

  • Page 27: S-Mode Programming

    Ser-7000 program manual s-mode programming x 21 s-mode programming s- mode programming menu caution: s-mode functions are reserved for dealers who set-up and service your ser-7000 system. The user will normally perform no s-mode functions. The procedures described in this area are security sensitive...

  • Page 28

    22 x s-mode programming ser-7000 program manual 1. Turn the key to the s position. S - m o d e p r o g r a m m i n g m e n u 1. Self tests 2 . M e m o r y c l e a r 3 . M e m o r y a l l o c a t i o n 4 . K e y b o a r d k e y r e l o c a t i o n 5 . S y s t e m o p t i o n s 6 . P r i n t e r d r i...

  • Page 29: Self Tests

    Ser-7000 program manual s-mode programming x 23 self tests 1. Select self test from the s-mode programming menu to display the h/w test screen. 2. Choose an item from the menu in one of two ways: type the number for your choice and press enter, or press the n or p keys to move the cursor to your cho...

  • Page 30

    24 x s-mode programming ser-7000 program manual drawer test f i r s t d r a w e r s e c o n d d r a w e r drawer compulsory d r a w e r 1 c l o s e d d r a w e r 2 c l o s e d 1. Select drawer from the h/w test menu. 2. Power off the register and install a drawer at the ports you wish to test. 3. Th...

  • Page 31

    Ser-7000 program manual s-mode programming x 25 display test press any key to return 1. Select display from the h/w test menu to begin the display test. 2. At the completion of the display exercise, the message "rear lcd test" will display. 3. Press any key to return to the h/w test menu. Keyboard t...

  • Page 32

    26 x s-mode programming ser-7000 program manual mode & clerk key test mode/clerk key test t u r n m o d e k e y o r e n t e r c l e r k k p r e s s a n y k e y t o f i n i s h reg mode 1. Select mode/clerk key test from the h/w test menu to begin the mode/clerk key test. 2. Turn the mode key; the di...

  • Page 33

    Ser-7000 program manual s-mode programming x 27 irc test irc test 1. Register # setting 2 . I n t e r n a l l o o p b a c k ( c h i p ) 3 . I n t e r n a l l o o p b a c k ( d r i v e r ) 4 . E x t e r n a l l o o p b a c k 5 . I r c s y s t e m t e s t 1. Select irc from the h/w test menu to displa...

  • Page 34

    28 x s-mode programming ser-7000 program manual printer test ** ser-7000 printer test ** 1. Select printer from the h/w test menu to begin the printer test. 2. The printers will print test patterns continuously until the clear key is pressed. 3. Press esc to return to the h/w test menu. Ram checksum...

  • Page 35

    Ser-7000 program manual s-mode programming x 29 version check s e r - 7 0 0 0 0 . 9 9 d n o v . 2 6 2 0 0 3 r a m s i z e : 5 1 2 k b y t e b a s e ( 5 1 2 k ) e x t . ( 0 0 0 0 k ) r o m c h e c k s u m : 0 4 8 0 d 3 7 b # p l u : 1 0 7 / 1 0 7 b o o t r o m v e r : ( v 1 . 0 1 ) i n i t # : 1 0 p ...

  • Page 36

    30 x s-mode programming ser-7000 program manual printer status check printer status check c o v e r c l o s e d a u t o - c u t t e r o . K . J - p a p e r p r e s e n t j - p a p e r r - p a p e r p r e s e n t r - p a p e r press any key 1. Select printer status check from the h/w test menu to dis...

  • Page 37: Memory Clear

    Ser-7000 program manual s-mode programming x 31 memory clear caution: the procedures described in this area are security sensitive. Clearing all or parts of the ser-7000 memory may cause damage or loss to the program. Do not share this information with unauthorized users and distribute the special s...

  • Page 38

    32 x s-mode programming ser-7000 program manual 4 2 3 1 6. The display will monitor the memory clear process, which takes about 1 minute. When complete, press any key. X the display will prompt: “enter register number (1-32)”. Type the register number on the numeric keypad and press enter. X the dis...

  • Page 39

    Ser-7000 program manual s-mode programming x 33 selective memory clearing the memory clear selection allows you to selectively clear various areas of the ser-7000 memory. S - m o d e m e m o r y c l e a r 1. All ttls, cnts&grand ttls 2 . T o t a l s a n d c o u n t e r s 3 . G r a n d t o t a l s o ...

  • Page 40: Memory Allocation

    34 x s-mode programming ser-7000 program manual memory allocation caution: the procedures described in this area are security sensitive. Memory is automatically cleared after memory allocation is set. Do not change memory allocation after your system has been installed unless you are aware that all ...

  • Page 41

    Ser-7000 program manual s-mode programming x 35 m e m o r y a l l o c a t i o n p r o g r a m 1 9 . # o f w l u 010 2 0 . # o f l i n e s p e r w l u 2 8 2 1 . # o f r e c i p e 0 1 0 2 2 . # o f i n v e n t o r y i n g r e d i e n t 0 2 5 2 3 . # o f l i n e s f o r e . J . 0 0 0 0 0 2 4 . # o f p ...

  • Page 42

    36 x s-mode programming ser-7000 program manual memory allocation program notes field notes 1 # of digits in report totals (8-10) determine the maximum size of report totals: 8, 9 or 10 digits. 2 # of digits in report counters (6-8) your choice assumes two digits to the right of the decimal. For exa...

  • Page 43

    Ser-7000 program manual s-mode programming x 37 field notes 11 # of tracking files (0-4) select the number of separate tracking files you wish to use. Select "0" for no check tracking, additional files might be used for table tracking, house account tracking, drive through tracking, and/or phone ord...

  • Page 44

    38 x s-mode programming ser-7000 program manual field notes 19 # of wlu enter the total number of wlus you wish to use here. Wlus are pop-up windows listing plus, condiments, and/or functions. See "window look up (wlu)" in "p-mode programming" for a complete discussion of wlu applications. 20 # of l...

  • Page 45

    Ser-7000 program manual s-mode programming x 39 field notes 33 track 4 by time periods 34 # of mix & match enter the maximum number of mix and match discount tables that will be used. 35 report selection table z2 represents accumulation of z1 reports; z3 represents accumulation of z2 reports, etc. Y...

  • Page 46: Keyboard Key Relocation

    40 x s-mode programming ser-7000 program manual keyboard key relocation k e y b o a r d k e y r e l o c a t i o n 1. Plu keys 2 . W l u k e y s 3 . F u n c t i o n k e y s e s c e n t e r p a g e u p / d n n p k e y b o a r d k e y r e l o c a t i o n 1 . P l u k e y s 1. Kbd level 1 2 . W l u k e y...

  • Page 47

    Ser-7000 program manual s-mode programming x 41 plu key relocation this process accomplishes two purposes: x it changes the assignment of a key location to a plu key. You can change an existing function key or wlu key into a plu key by selecting any key on the keyboard in this program. X it assigns ...

  • Page 48

    42 x s-mode programming ser-7000 program manual wlu key relocation this process accomplishes two purposes: x it changes the assignment of a key location to a wlu key. You can change an existing function key or plu key into a wlu key by selecting any key on the keyboard in this program. X it assigns ...

  • Page 49

    Ser-7000 program manual s-mode programming x 43 w l u k e y r e l o c a t i o n p r o g r a m m i n g k e y b o a r d l e v e l 1 x p r e s s a n y k e y t o r e a d a n d / o r c h a n g e c u r r e n t a s s i g n m e n t x p r e s s e s c t o e x i t k e y p o s i t i o n 1 3 : o l d = k e y c o ...

  • Page 50

    44 x s-mode programming ser-7000 program manual function key relocation this process changes the assignment of any key. You can change an existing wlu key or plu key into a different function key by selecting any key on the keyboard in this program. 1. Press any key to read and/or change the current...

  • Page 51

    Ser-7000 program manual s-mode programming x 45 f u n c t i o n k e y r e l o c a t i o n p r o g r a k e y b o a r d l e v e l 1 x p r e s s a n y k e y t o r e a d a n d / o r c h a n g e c u r r e n t a s s i g n m e n t x p r e s s e s c t o e x i t k e y p o s i t i o n 1 6 7 : o l d = k e y c ...

  • Page 52

    46 x s-mode programming ser-7000 program manual function key code list code# & function 1. Numeric 1 2. Numeric 2 3. Numeric 3 4. Numeric 4 5. Numeric 5 6. Numeric 6 7. Numeric 7 8. Numeric 7 9. Numeric 9 10. Numeric 0 11. Numeric 00 12. Numeric 000 13. Add check 14. Back space 15. Bold 16. Cancel 1...

  • Page 53

    Ser-7000 program manual s-mode programming x 47 code# & function 147. #/no sale 148. P/bal 149. Page down 150. Page up 151. Paid out 1 152. Paid out 2 153. Paid out 3 154. Paid out 4 155. Paid out 5 156. Paid recall 157. % 1 158. % 2 159. % 3 160. % 4 161. % 5 162. % 6 163. % 7 164. % 8 165. % 9 166...

  • Page 54: System Options

    48 x s-mode programming ser-7000 program manual system options s - m o d e s y s t e m o p t i o n s 1 . R e g i s t e r # ( 0 1 - 3 2 ) 01 2 . S t o r e # 0 0 0 0 0 0 3 . I r c : f r o m r e g i s t e r # 0 0 4 . I r c : t o r e g i s t e r # 0 0 5 . I r c # o f r e t r i e s 0 0 6 . P r t / d i s ...

  • Page 55

    Ser-7000 program manual s-mode programming x 49 s - m o d e s y s t e m o p t i o n s 1 2 . S e n d p l u d e s c w h e n p o l l e d y 1 3 . D i s p p r i n t e r e r r w h e n p o l l y e s c y / n e n t e r p a g e u p / d n n p o m system option program notes (s-mode) field notes print/display d...

  • Page 56: Printer Driver Selections

    50 x s-mode programming ser-7000 program manual printer driver selections this program allows you to change the commands for specific printers, or to set up a new printer by using generic (1-5) settings. P r i n t e r d r i v e r s e l e c t i o n s t y p e sam stp103 s t a r t c a n c e l sam st i ...

  • Page 57

    Ser-7000 program manual s-mode programming x 51 changing printer commands p r i n t e r d r i v e r s e l e c t i o n s t y p e sam stp103 s t a r t c a n c e l sam st i n i t . I b 4 0 s a m s r c o m p r e s s s a m s r r e d / r e v c t z e n e x p a n d e d 1 b 2 1 2 1 i b 2 1 0 1 p r i n t e r ...

  • Page 58

    52 x s-mode programming ser-7000 program manual serial port device selections use the serial port device selections program to define the type of device that is attached to each serial port. S e r i a l p o r t d e v i c e s e l e c t i o n s port d e v i c e - - - - - - - - - - - - - - - - port#1 d...

  • Page 59

    Ser-7000 program manual s-mode programming x 53 define serial port parameters choose define serial port parameters to set the baud rate, parity, and other options for each serial port. S e r i a l p o r t # 1 p a r a m e t e r s e t p o r t d e s c r i p t i o n p o r t 1 b a u d r a t e 0 0 9 6 0 0...

  • Page 60

    54 x s-mode programming ser-7000 program manual serial port parameters program notes field notes baud rate select 2400, 9600, 19200, 28800, 33600, 56000 or other from the pop-up window. (9600 is default.) if you select other, you may enter your own value. Parity select none, even, or odd from the po...

  • Page 61: S-Mode Program Scan Printing

    Ser-7000 program manual s-mode programming x 55 s-mode program scan printing this function allows you to print copies of the register's s-mode programming. S - m o d e p r o g r a m s c a n p r i n t i n g 1.Memory allocation 2 . S y s t e m o p t i o n s 3 . P r i n t e r d r i v e r s e l e c t i ...

  • Page 62: System Password

    56 x s-mode programming ser-7000 program manual system password the system password allows service access to all of the functions of the ser-7000. For example, use the system password: x if you are servicing a users system and you do not know an employee code that allow you to access necessary funct...

  • Page 63: Super Macro Scan

    Ser-7000 program manual s-mode programming x 57 super macro scan the super macro records transaction keystrokes, including key position changes. The size of the super macro, in keystrokes, is set in memory allocation (see "memory allocation" on page 36.) when the super macro memory is full, the most...

  • Page 64: Rom File Download

    58 x s-mode programming ser-7000 program manual rom file download choose rom file download to down load the eprom to all satellite registers in the irc system. All other terminals must be in the rom download mode. Warning: this procedure will clear all totals, counters and programs from the satellit...

  • Page 65: P-Mode Programming

    Ser-7000 program manual p-mode programming x 59 p-mode programming p-mode programming menu p - m o d e p r o g r a m m i n g m e n u 1. Plu 2 . P l u s t a t u s g r o u p 3 . G r o u p 4 . F u n c t i o n k e y 5 . S y s t e m o p t i o n 6 . T a x e s e n t e r p a g e u p / d n n p p - m o d e p ...

  • Page 66

    60 x p-mode programming ser-7000 program manual p - m o d e p r o g r a m m i n g m e n u 19. Plu minimum stock 2 0 . C o p y p r o g r a m 2 1 . P r o g r a m f i l e d o w n l o a d 2 2 . P - m o d e p r o g r a m s c a n p r i n t i n g 2 3 . N o n - p l u c o d e 2 4 . P l u & w l u k e y r e l ...

  • Page 67: Plu Programming

    Ser-7000 program manual p-mode programming x 61 plu programming the maximum number of plus available is determined in memory allocation. (see "memory allocation" in "s-mode programming".) each plu can be assigned a code number up to 14 digits in length. P l u p r o g r a m m i n g 1. Add & change 2 ...

  • Page 68

    62 x p-mode programming ser-7000 program manual add & change p l u # 00000000000000 p r o g r a m m i n g x p r e s s p l u t o b e p r o g r a m m e d x e n t e r p l u n u m b e r – [ e n t e r ] x e n t e r p l u n u m b e r – [ p l u # ] x p r e s s w i l w h e r e t h e p l u i s l o c a t e d ...

  • Page 69

    Ser-7000 program manual p-mode programming x 63 plu program notes field notes descriptor enter a descriptor up to 16 characters in length. Note that the method you use to enter the descriptor depends upon your selection for general function option #12 (see “general function options” on page 57.) x t...

  • Page 70

    64 x p-mode programming ser-7000 program manual field notes recipe# a menu-explosion type inventory system is set up when plus are assigned to a recipe number. Note the following related programs and activities: x see “ingredient inventory” on page 40 to maintain the ingredient list with unit costs ...

  • Page 71

    Ser-7000 program manual p-mode programming x 65 delete plus p l u p r o g r a m m i n g 1. Add & change 1 . P l u d e l e t e o n e b y o n e 2 . P l u d e l e t b y r a n g e e s c e n t e r p a g e u p / d n n p 1. From the plu programming screen, select delete. 2. Press a numeric digit (1-2) or p...

  • Page 72

    66 x p-mode programming ser-7000 program manual plu delete by range p l u p r o g r a m m i n g 1. Add & change f r o m p l u # 00000000000000 t o p l u # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 e s c e n t e r i n d i v i d u a l p l u 1. Enter the beginning number of the range to be deleted in the from plu # ...

  • Page 73

    Ser-7000 program manual p-mode programming x 67 plu status group (plu status link) plu status groups allow memory to be used more efficiently. In most applications, large groups of plus are set with many identical options, while the plu number, descriptor and price are unique. On the plu programming...

  • Page 74

    68 x p-mode programming ser-7000 program manual p l u s t a t u s g r o u p # 2 3 p r o g r a m 1 1 . I s p l u f o o d s t a m p e l i g i b l e n 1 2 . I s p l u m e m o n 1 3 . I s p l u s c a l e a b l e n 1 4 . A u t o s c a l e o n t h i s p l u n 1 5 . A u t o t a r e # ( 0 - 2 0 ) 0 0 1 6 . ...

  • Page 75

    Ser-7000 program manual p-mode programming x 69 p l u s t a t u s g r o u p # 2 3 p r o g r a m 4 0 . A u t o g r i l l ? N 4 1 . A u t o g r i l l k p g r o u p # 0 4 2 . E l i g . F o r c a n a d i - d o n u t l a w 0 0 4 3 . A g e v e r i f i c a t i o n ( 0 - 5 ) 0 4 4 . M i x & m a t c h t a b ...

  • Page 76

    70 x p-mode programming ser-7000 program manual # field notes 7 is plu single item the transaction is finalized automatically when a single item plu is registers as the first item in a sale. 8 is plu negative negative plus subtract from a sale, rather than add to a sale. 9 is plu hash hash plus do n...

  • Page 77

    Ser-7000 program manual p-mode programming x 71 # field notes 16 stock plu choose y if you wish to track plu stock, where each whole unit plu activity subtracts a value of "1" from the stock counter. (note that if multiplication or decimal multiplication is used when the plu is registered, the resul...

  • Page 78

    72 x p-mode programming ser-7000 program manual # field notes 22 allow waste if y, the waste function is allowed on plus reporting to this group. 23 allow discount if y, the operation of an item discount after registration of a plu reporting to this group is allowed. 24 allow surcharge if y, the ope...

  • Page 79

    Ser-7000 program manual p-mode programming x 73 # field notes 36 display on register screen set to n if you wish the registration of plus in this group not to display on the register operator screen. 37 print on guest checks must be set to y for plus in this group to print on the guest check. 38 prt...

  • Page 80: Group

    74 x p-mode programming ser-7000 program manual group groups are designated to accumulate plu sales for convenient reporting totals. A plu can send its' sales information to up to 3 groups. Group link #1 is set in plu programming. Group links #2 and #3 are set in plu status group programming. This p...

  • Page 81: Function Key

    Ser-7000 program manual p-mode programming x 75 function key function key options vary by key. Since function keys may exist on different levels of the keyboard, or they may only be accessed through wlus, they may be addressed for programming by directly pressing the key, or by entering the function...

  • Page 82

    76 x p-mode programming ser-7000 program manual function key program summary code# & function programmability 1. Numeric 1 descriptor 2. Numeric 2 descriptor 3. Numeric 3 descriptor 4. Numeric 4 descriptor 5. Numeric 5 descriptor 6. Numeric 6 descriptor 7. Numeric 7 descriptor 8. Numeric 7 descripto...

  • Page 83

    Ser-7000 program manual p-mode programming x 77 code# & function programmability 98. Macro 22 see program screen on page 57 99. Macro 23 see program screen on page 57 100. Macro 24 see program screen on page 57 101. Macro 25 see program screen on page 57 102. Macro 26 see program screen on page 57 1...

  • Page 84

    78 x p-mode programming ser-7000 program manual code# & function programmability 198. Recall check 2 see program screen on page 57 199. Recall check 3 see program screen on page 57 200. Recall check 4 see program screen on page 57 201. Recd acct 1 see program screen on page 57 202. Recd acct 2 see p...

  • Page 85

    Ser-7000 program manual p-mode programming x 79 cancel f u n c . K e y # 016 p r o g r a m m i n g d e f a u l t d e s c : c a n c e l d e s c r i p t o r : c a n c e l h a l o ( 0 : n o l i m i t ) 0 0 0 0 0 . 0 0 a c t i v e i n x o n l y n c o m p u l s o r y v a l i d a t i o n n p r i n t r e c...

  • Page 86

    80 x p-mode programming ser-7000 program manual check f u n c . K e y # 021 p r o g r a m m i n g d e f a u l t d e s c : c h e c k d e s c r i p t o r : c h e c k h a l o ( 0 = n o l i m i t ) 0 0 0 0 0 . 0 0 1 2 3 4 5 6 e x e m p t t a x : n n n n n n o p e n d r a w e r y e s c y / n e n t p a g ...

  • Page 87

    Ser-7000 program manual p-mode programming x 81 check cash f u n c . K e y # 022 p r o g r a m m i n g d e f a u l t d e s c : c h e c k c a s h d e s c r i p t o r : c h e c k c a s h h a l o ( 0 : n o l i m i t ) 0 0 0 0 0 . 0 0 a c t i v e i n x o n l y n a l l o w h a l o o v e r r i d e i n x o...

  • Page 88

    82 x p-mode programming ser-7000 program manual currency conversion 1-5 f u n c . K e y # 026 p r o g r a m m i n g d e f a u l t d e s c : c u r r . C o n v 1 d e s c r i p t o r : c u r r . C o n v 1 r a t e 0 0 . 0 0 0 0 0 0 c h a n g e i n f o r e i g n c u r r e n c y n l i n k e d d r a w e r ...

  • Page 89

    Ser-7000 program manual p-mode programming x 83 drive thru/eat in/take out shown below is a sample screen showing the identical function options for all the functions listed above: f u n c . K e y # 038 p r o g r a m m i n g d e f a u l t d e s c : d r i v e t h r u d e s c r i p t o r : d r i v e t...

  • Page 90

    84 x p-mode programming ser-7000 program manual food stamp tend f u n c . K e y # 055 p r o g r a m m i n g d e f a u l t d e s c : f d / s t e n d d e s c r i p t o r : f d / s t e n d h a l o ( 0 = n o l i m i t ) 0 0 0 0 0 . 0 0 1 2 3 4 5 6 e x e m p t t a x : n n n n n n o p e n d r a w e r y e ...

  • Page 91

    Ser-7000 program manual p-mode programming x 85 kp routing f u n c . K e y # 248 p r o g r a m m i n g d e f a u l t d e s c : k p r o u t i n g d e s c r i p t o r : k p r o u t i n g a c t i v e i n x o n l y ? N r o u t i n g p e r i o d i s : s t a y d o w n e s c y / n e n t p a g e u p / d n n...

  • Page 92

    86 x p-mode programming ser-7000 program manual macro 1-40 each macro can execute up to 50 keystrokes. M a c r o k e y # 1 p r o g r a m m i n g a l p h a d e s c r i p t o r macro1 a c t i v e i n x o n l y ? N - - - - - - - - - - - - - - - - - - 0 1 [ d o n e ] 0 2 [ c l e f t ] 0 3 e s c e n t p ...

  • Page 93

    Ser-7000 program manual p-mode programming x 87 misc tend 1-16 f u n c . K e y # 119 p r o g r a m m i n g d e f a u l t d e s c : m i s c t e n d 1 d e s c r i p t o r : m i s c t e n d 1 h a l o ( 0 = n o l i m i t ) 0 0 0 0 0 . 0 0 1 2 3 4 5 6 e x e m p t t a x : n n n n n n o p e n d r a w e r y...

  • Page 94

    88 x p-mode programming ser-7000 program manual modifier 1-10 f u n c . K e y # 136 p r o g r a m m i n g d e f a u l t d e s c : m o d i f i e r 1 d e s c r i p t o r : m o d i f i e r 1 a c t i v e i n x o n l y n m o d i f y d e s c o n l y ( n o t p l u # ) n p r i n t d e s c o n g u e s t c h ...

  • Page 95

    Ser-7000 program manual p-mode programming x 89 not found plu f u n c . K e y # 251 p r o g r a m m i n g d e f a u l t d e s c : n o t f o u n d p l u d e s c r i p t o r : n o t f o u n d p l u s k i p i n n o t f o u n d p l u r e g i s t r a t e g r o u p l i n k # 1 n d e s c r i p t o r n e s ...

  • Page 96

    90 x p-mode programming ser-7000 program manual paid out 1-5/recd acct 1-5 shown below is a sample screen showing the identical function options for all the functions listed above: f u n c . K e y # 151 p r o g r a m m i n g d e f a u l t d e s c : p a i d o u t 1 d e s c r i p t o r : p a i d o u t...

  • Page 97

    Ser-7000 program manual p-mode programming x 91 %1 - %10 f u n c . K e y # 157 p r o g r a m m i n g d e f a u l t d e s c : % 1 d e s c r i p t o r : % 1 h a l o / r a t e 0 0 . 0 0 0 1 2 3 4 5 6 t a x a b l e : n n n n n n f u n c t i o n i s i n a c t i v e n e s c y / n e n t e r p a g e u p / d...

  • Page 98

    92 x p-mode programming ser-7000 program manual price inquiry/stock inquiry f u n c . K e y # 169 p r o g r a m m i n g d e f a u l t d e s c : p r i c e i n q d e s c r i p t o r : p r i c e i n q a c t i v e i n x o n l y ? N f u n c i s : y = s t a y d o w n / n = p o p u p n e s c y / n e n t e ...

  • Page 99

    Ser-7000 program manual p-mode programming x 93 promo f u n c . K e y # 193 p r o g r a m m i n g d e f a u l t d e s c : p r o m o d e s c r i p t o r : p r o m o 1 2 3 4 5 6 t a x a b l e : y y y y y y a c t i v e i n x o n l y n e s c y / n e n t e r p a g e u p / d n n p o m recall check 1-4 f u...

  • Page 100

    94 x p-mode programming ser-7000 program manual recall check key program note field notes drive thru feature enabled? Set to y if the tracking file is used for drive thru windows in fast food operations. In this case, the recall key will automatically recall the lowest tracking number from the appro...

  • Page 101

    Ser-7000 program manual p-mode programming x 95 scale f u n c . K e y # 208 p r o g r a m m i n g d e f a u l t d e s c : s c a l e d e s c r i p t o r : s c a l e a c t i v e i n x o n l y n i n h i b i t t a r e w e i g h t e n t r y n t a r e e n t r y i n x o n l y n t a r e e n t r y i s c o m ...

  • Page 102

    96 x p-mode programming ser-7000 program manual store check 1-4 f u n c . K e y # 214 p r o g r a m m i n g d e f a u l t d e s c : s t o r e c h k 1 d e s c r i p t o r : s t o r e c h k 1 h a l o ( 0 : n o l i m i t ) 0 0 0 0 0 . 0 0 1 2 3 4 5 6 e x e m p t t a x : n n n n n n a c t i v e i n x o ...

  • Page 103

    Ser-7000 program manual p-mode programming x 97 tax exempt f u n c . K e y # 224 p r o g r a m m i n g d e f a u l t d e s c : t a x e x e m p t d e s c r i p t o r : t a x e x e m p t h a l o ( 0 : n o l i m i t ) 0 0 0 0 0 . 0 0 1 2 3 4 5 6 e x e m p t t a x : y y y y y y n o n - a d d # c o m p u...

  • Page 104

    98 x p-mode programming ser-7000 program manual tip declare f u n c . K e y # 019 p r o g r a m m i n g d e f a u l t d e s c : t i p d e c l a r e d e s c r i p t o r : t i p d e c l a r e k e y i s a c t i v e i n x o n l y n c o m p u l s o r y v a l i d a t i o n n c h a r g e t i p i s d e d u ...

  • Page 105

    Ser-7000 program manual p-mode programming x 99 void item f u n c . K e y # 241 p r o g r a m m i n g d e f a u l t d e s c : v o i d i t e m d e s c r i p t o r : v o i d i t e m h a l o ( 0 : n o l i m i t ) 0 0 0 0 0 . 0 0 a c t i v e i n x o n l y n c o m p u l s o r y v a l i d a t i o n n e s ...

  • Page 106: System Options

    100 x p-mode programming ser-7000 program manual system options options are sorted by category to assist the programmer in finding a specific option. Within each category, options are also referenced by number for easy retrieval. S y s t e m o p t i o n p r o g r a m m i n g 1. General function opti...

  • Page 107

    Ser-7000 program manual p-mode programming x 101 general function options g e n e r a l f u n c t i o n o p t i o n s 1 . M a n a g e r c o n t r o l ( i n x - m o d e ) : n e g a t i v e s a l e s n n e g a t i v e t e n d e r n z e r o s a l e s n 2 . E n f o r c e e a t - i n / t - o u t / d - t ...

  • Page 108

    102 x p-mode programming ser-7000 program manual g e n e r a l f u n c t i o n o p t i o n s m a x i m u m d i g i t ( 1 - 5 ) 1 1 3 . P l u p r e s e t / h a l o o v e r r i d e n 1 4 . S i l e n t k e y d e p r e s s i o n n 1 5 . Y = c o d e e n t r y / n = a / n o v e r l a y n 1 6 . O p e n e n...

  • Page 109

    Ser-7000 program manual p-mode programming x 103 g e n e r a l f u n c t i o n o p t i o n s 4 0 . S c r e e n s a v e r ( m i n u t e s ) 00 4 1 . M e n u s e l e c t w i t h o u t e n t e r n 4 2 . R e c e i p t s t a t u s o n d i s p l a y y 4 3 . C a r d r e a d e r e n a b l e n 4 4 . S a l e ...

  • Page 110

    104 x p-mode programming ser-7000 program manual general function options program notes # field notes 1 manager control (in x- mode): negative sales negative tender zero sales determine which of the listed functions require the key lock to be placed in the x position. Settings here do not affect tra...

  • Page 111

    Ser-7000 program manual p-mode programming x 105 # field notes 11 global entry limit (0-7) select an entry limit that applies to all numeric entries (i.E. Amounts for plu entry, tenders, or multiplication.) the global entry limit will override any individually programmed limits. 12 direct multiplica...

  • Page 112

    106 x p-mode programming ser-7000 program manual # field notes 22 emp. Sign on select the method you wish to use when signing on to operate the ser-7000: push button, secret code, employee# or mcr. See “employee sign-on/sign- off” in the ser-7000 operation manual for more information. 23 qty limit f...

  • Page 113

    Ser-7000 program manual p-mode programming x 107 # field notes 41 menu select without enter you can select an item from a menu (or from a wlu that does not allow functions) by entering only the item number, rather than the item number then enter. Note: if there are more than 9 selections on the menu...

  • Page 114

    108 x p-mode programming ser-7000 program manual tax options t a x o p t i o n s 1 . T a x r o u n d f a c t o r u p a t . 5 2 . V a t s u b t r a c t f r o m i n d . P l u n 3 . T a x e x e m . Q t y ( c a n a d a d o n u t ) 0 0 4 . P r t t a x a b l e a m o u n t s o n r / j n e s c y / n e n t e...

  • Page 115

    Ser-7000 program manual p-mode programming x 109 # field notes 3 tax exem. Qty (canada donut) enter the quantity at which you wish tax to be exempted. For example if set at 12, registration of plus reported to status groups with eligibility for canadian donut law selected will charge tax until the q...

  • Page 116

    110 x p-mode programming ser-7000 program manual cash drawer options c a s h d r a w e r o p t i o n s 1 . S a l e s w i t h d r a w e r o p e n y 2 . C - i - d a m o u n t l i m i t 0 0 0 0 0 . 0 0 3 . O p e n d r a w e r d u r i n g x - r p t n 4 . O p e n d r a w e r d u r i n g z - r p t n 5 . A...

  • Page 117

    Ser-7000 program manual p-mode programming x 111 training mode options t r a i n i n g m o d e o p t i o n s 1 . T r a i n i n g m o d e p a s s w o r d 0000 2 . O p e n d r a w e r i n t r a i n m o d e n 3 . T r a i n i n g e m p l o y e e f i l e # 0 0 4 . A l l o w r e a r d s p i n t r a i n i ...

  • Page 118

    112 x p-mode programming ser-7000 program manual level/modifier options l e v e l / m o d i f i e r o p t i o n s 1 . D e f a u l t k e y b o a r d l e v e l 1 2 . K e y b o a r d l v l : s t a y d o w n 3 . D e f a u l t p r i c e l e v e l 0 1 4 . P r i c e l e v e l : i t e m p o p u p 5 . P l u ...

  • Page 119

    Ser-7000 program manual p-mode programming x 113 level/modifier options program notes # field notes 1 default keyboard level if keyboard levels are pop-up (see option #2), enter the level you wish to return to after an entry in a different level. 3 default price level if price levels are pop-up (see...

  • Page 120

    114 x p-mode programming ser-7000 program manual tracking file options t r a c k i n g f i l e o p t i o n s 1 . A u t o m a t i c t r a n s f e r c h e c k n 2 . C h e c k s p a i d s l i p i s s t u b n 3 . P r i n t g u e s t c h e c k a t t e n d e r n 4 . S e l e c t h e l d i t e m s o n r e c...

  • Page 121

    Ser-7000 program manual p-mode programming x 115 tracking file options program notes # field notes 1 automatic transfer check if y, the check will be assigned to the last person who posted to the check. 2 checks paid slip is stub if y, the print check function produces a guest check with totals only...

  • Page 122

    116 x p-mode programming ser-7000 program manual kitchen printing/video options k i t c h e n p r i n t i n g / v i d e o o p t i 1 . P r i n t a t k p : t o t a l a m o u n t l i n e n p r i n t s e a t # y o r d e r # y t r a n s a c t i o n v o i d i t e m s n p l u c o d e n e s c y / n e n t e ...

  • Page 123

    Ser-7000 program manual p-mode programming x 117 kitchen printing/video options program notes # field notes 1 print at kp: total amount line print seat # order # transaction void items plu code plu price bitmat number of items logo message you can determine the content of each kitchen printer chit. ...

  • Page 124

    118 x p-mode programming ser-7000 program manual # field notes 10 kv is: y=real time/n=batch real time means that each item will display at the screen when the next item is entered (one item delay). Batch means that the entire order will display when the order is finalized. 11 use kp choose from "th...

  • Page 125

    Ser-7000 program manual p-mode programming x 119 validation/subtotal print options v a l i d a t i o n / s u b t o t a l o p t i o n s 1 . V a l i d a m t : y = t o t a l / n = t e n d e r n 2 . C h k v a l i d a m t : y = t t l / n = t e n d n 3 . A c t i v a t e v a l i d a t i o n s e n s o r n 4...

  • Page 126

    120 x p-mode programming ser-7000 program manual validation/subtotal print options program notes note: to validate, you must attach a printer with validation capability to each register that will validate. Use option #7 to identify the port to which the printer is attached. # field notes 1 validatio...

  • Page 127

    Ser-7000 program manual p-mode programming x 121 general printing options g e n e r a l p r i n t i n g o p t i o n s 1 . P r i n t o n r e c e i p t : e m p l o y e e n a m e y c o n s e c u t i v e # y i t e m s b y g r o u p n d a t e ٛ y t i m e y e s c y / n e n t e r p a g e u p / d n n p o m ...

  • Page 128

    122 x p-mode programming ser-7000 program manual g e n e r a l p r i n t i n g o p t i o n s 2 1 . P r i n t r e c e i p t a u t o m a t i c a l l y n 2 2 . P r t r c p t a f t t i m e c l k e d i t y 2 3 . P r i n t g r o u p n a m e w h e n p r i n t i n g i t e m s b y g r o u p n 2 4 . P r t g u...

  • Page 129

    Ser-7000 program manual p-mode programming x 123 # field notes 3 lines after preamble enter the number of lines you wish to feed after the preamble and before the first receipt print line. 4 lines before postamble enter the number of lines you wish to after the last receipt line and before the posta...

  • Page 130

    124 x p-mode programming ser-7000 program manual # field notes 24 prt guest chk prt cnt on gc if y, a counter of the number of times the guest check has been printed appears on the check. 25 print in double you can choose double-width printing for total, tender, change, and/or order # 26 prt rcpt au...

  • Page 131

    Ser-7000 program manual p-mode programming x 125 report printing options r e p o r t p r i n t i n g o p t i o n s 1 . Z e r o s k i p : f i n a n c i a l r e p o r t y p l u r e p o r t y e m p l o y e e r e p o r t y g r o u p r e p o r t y t i m e p e r i o d r e p o r t y e s c y / n e n t e r p...

  • Page 132

    126 x p-mode programming ser-7000 program manual report printing options program notes # field notes 1 zero skip choose whether to print or skip totals with a zero value on each of the listed reports. 2 print % of sales on plu rpt if y, the percentage of each plus sales is calculated and printed on ...

  • Page 133

    Ser-7000 program manual p-mode programming x 127 report options r e p o r t o p t i o n s 1 . O n l y t t l o n p r o d m i x g r p r . N 2 . O n l y i t e m w a c t . I n v e n t r y y 3 . C a s h d e c l a r a t i o n c o m p u l s o r y n 4 . S i g n o n e m p . B e f o r e r e p o r t s n 5 . E ...

  • Page 134

    128 x p-mode programming ser-7000 program manual report options program notes # field notes 1 only ttl on prod mix group r. If y, skips sales by time period on the product mix report. 2 only items w act. Inv entry affects the inventory report (reporting ingredients from the recipe system). If y, the...

  • Page 135

    Ser-7000 program manual p-mode programming x 129 # field notes 16 allow z stock report if y, resetting the stock report is allowed. 17 allow z1 time keeping report when emp. Are clocked in if y, the time keeping report can be run when employees are clocked in. 18 avg. Gst on fin is from gst if n, th...

  • Page 136

    130 x p-mode programming ser-7000 program manual time keeping options t i m e k e e p i n g o p t i o n s 1 . O v e r t i m e h o u r i s u s e d f d a y 2 . H o u r s p e r o v e r t i m e s t a r t s 0 0 8 3 . O v e r t i m e f a c t o r 1 . 5 4 . C o m p o u t f o r b r e a k o r o u t y 5 . T i ...

  • Page 137

    Ser-7000 program manual p-mode programming x 131 # field notes 7 clk in/out emp on z tm keep if y, all employees clocked in at the time of the z time keeping report will be clocked out for the report and clocked back in after the report..

  • Page 138

    132 x p-mode programming ser-7000 program manual e.J. (electronic journal) & detail printing options e . J . & d e t a i l p r i n t i n g o p t i 1 . A c t i v a t e e l e c t r o n i c j o u r n a l n 2 . D i s p e . J . B u f f f u l l w a r n i n g n 3 . E . J . O v e r r i d e o n b u f f f u l...

  • Page 139

    Ser-7000 program manual p-mode programming x 133 e.J. (electronic journal) & detail printing option program notes # field notes 1 activate electronic journal select y to activate the electronic journal. 2 disp e.J. Buff full warning select y to display a warning message when the electronic journal i...

  • Page 140: Taxes

    134 x p-mode programming ser-7000 program manual taxes t a x p r o g r a m m i n g 1. Tax 1 add on 2 . T a x 2 a d d o n 3 . T a x 3 a d d o n 4 . T a x 4 a d d o n e s c e n t e r p a g e u p / d n n p t a x p r o g r a m m i n g 3 . T a x 1 a d d o n 4 . T a x 2 a d d o n 5. Tax 5 add on 6 . T a x...

  • Page 141

    Ser-7000 program manual p-mode programming x 135 add on taxes t a x # 1 b y a d d o n r a t e 0 0 . 0 0 0 t h r e s h o l d 0 0 . 0 0 h i g h h o l d 0 0 0 0 0 0 0 . 0 0 options for add on taxes 1-5 are shown on the screen at the right. 1. Press the n p m o keys to select the field you wish to edit....

  • Page 142

    136 x p-mode programming ser-7000 program manual tax table t a x # 1 b y t a b l e m a x i m u m n o n - t a x a b l e a m o u n t 0 0 . 1 0 f i r s t t a x a m o u n t c h a r g e d 0 0 . 0 1 # o f n o n r e p e a t b r e a k s 0 5 # o f r e p e a t b r e a k s 0 3 b r e a k p o i n t 1 0 0 . 2 1 b...

  • Page 143

    Ser-7000 program manual p-mode programming x 137 tax table programming example - illinois 6% tax table 1. Examine the printed tax table for the tax you are programming. 2. Examine the pattern of break point differences to determine when the break points begin to repeat. Mark the beginning break poin...

  • Page 144

    138 x p-mode programming ser-7000 program manual vat t a x # 1 b y v a t r a t e 0 0 . 0 0 0 options for vat taxes 1- 5 are shown on the screen at the right. 1. Press the n p m o keys to select the field you wish to edit. Type new information and press enter. 2. Press esc to return to the tax progra...

  • Page 145: Messages

    Ser-7000 program manual p-mode programming x 139 messages m e s s a g e s m e n u 1. Logo message 2 . E r r o r m e s s a g e 3 . S y s t e m d e s c r i p t o r s 4 . R e p o r t d e s c r i p t o r s e s c e n t e r p a g e u p / d n n p m e s s a g e s m e n u 4 . R e p o r t d e s c r i p t o r ...

  • Page 146

    140 x p-mode programming ser-7000 program manual logo message l o g o m e s s a g e p r o g r a m m i n g j u s t i f y : c e n t e r p r e a m b l e # 1 : p r e a m b l e # 2 : l o g o m e s s a g e p r o g r a m m i n g a l p h a p r e a m b l e # 3 : p r e a m b l e # 4 : p r e a m b l e # 5 : ! ...

  • Page 147

    Ser-7000 program manual p-mode programming x 141 error messages using this program, you can change the standard error messages from the default settings to messages that meet your language or application needs. Note: use (22) p-mode program scan printing to print a list of error messages. E r r o r ...

  • Page 148

    142 x p-mode programming ser-7000 program manual system descriptors using this program, you can change the standard system descriptors from the default settings to messages that meet your language or application needs. The length of each descriptor varies. For example day of week fields are 3 charac...

  • Page 149

    Ser-7000 program manual p-mode programming x 143 report descriptors using this program, you can change the standard descriptors that appear on financial and employee reports from the default settings to descriptors that meet your language or application needs. M e s s a g e s m e n u 1 . L o g o m e...

  • Page 150

    144 x p-mode programming ser-7000 program manual check endorsement message c h e c k e n d o r s e m e n t m s g p r o g r j u s t i f y : c e n t e r l i n e # 1 l i n e # 2 c h e c k e n d o r s e m e n t m s g p r o g r a l p h a l i n e # 3 l i n e # 4 l i n e # 5 ! C h e c k e n d o r s e m e n...

  • Page 151

    Ser-7000 program manual p-mode programming x 145 guest check logo message g u e s t c h e c k l o g o m s g p r o g r j u s t i f y : c e n t e r l i n e # 1 l i n e # 2 g u e s t c h e c k l o g o m s g p r o g r a a l p h a l i n e # 3 l i n e # 4 l i n e # 5 ! G u e s t c h e c k l o g o m s g p ...

  • Page 152

    146 x p-mode programming ser-7000 program manual validation message v a l i d a t i o n m e s s a g e p r o g r a m j u s t i f y : c e n t e r l i n e # 1 l i n e # 2 1. Choose validation message to display the validation message programming screen. 2. Set the justify option to center, left or righ...

  • Page 153: Window Look Up (Wlu)

    Ser-7000 program manual p-mode programming x 147 window look up (wlu) overview there are three types of items that can be found on a window look-up (wlu): condiments, functions, and plus. The same wlu can contain any combination of condiments, functions, and plus. Specific features and rules for wlu...

  • Page 154

    148 x p-mode programming ser-7000 program manual wlu programming the first step in wlu programming is to select individual options for the wlu. Next, a list of items (condiments, plus and/or functions) is assigned. W l u # 01 p r o g r a m m i n g 1 . T i t l e : w l u # 1 2 . A l l o w c o n d i m ...

  • Page 155

    Ser-7000 program manual p-mode programming x 149 # field notes 3 # of item choice (0=unlmited) if you select 1 in this field, when a condiment is selected from the wlu, the wlu is automatically closed. In the same manner, if you select 2, the wlu is automatically closed after the second wlu is regis...

  • Page 156

    150 x p-mode programming ser-7000 program manual editing wlu items 1. If you wish to add or delete items from the wlu, select edit items and press enter. W l u # 0 1 p r o g r a m m i n g 5 . E x i t f r o m t a b l e w i t h d o n e y 6 . L i n k t o w l u # ( 0 = n o l i n k ) 0 0 edit items e s c...

  • Page 157

    Ser-7000 program manual p-mode programming x 151 adding plus or condiments to a wlu w l u # 0 1 p r o g r a m m i n g 1. To add plus or condiments to the wlu: x press the plu key on the keyboard, or x type the plu number and press plu, or x press plu directly to display the plu list. 2. Press the n ...

  • Page 158

    152 x p-mode programming ser-7000 program manual deleting items from a wlu 1. To delete an item, press n or p to select the item to delete. Press delete or void item to delete the item. W l u # 0 1 p r o g r a m m i n g 2. Note that items are automatically shifted up to fill the space the deleted it...

  • Page 159

    Ser-7000 program manual p-mode programming x 153 adding functions to a wlu w l u # 0 1 p r o g r a m m i n g 1. To add functions to the wlu, press the function you wish to add or press esc to view a function list. Note: allow functions must be set to y (yes) on the wlu programming window to allow fu...

  • Page 160

    154 x p-mode programming ser-7000 program manual exiting wlu edit items w l u # 0 1 p r o g r a m m i n g 1. Press done to exit the edit items window. 2. Continue to program wlus as necessary or press esc to return to the p- mode programming menu. P l u f u n c t i o n e s c v o i d i t e m d o n e ...

  • Page 161: Time Period

    Ser-7000 program manual p-mode programming x 155 time period memory allocation determines whether there are 24, 48, or 96 time periods. Time periods will default to hourly periods if 24 periods are selected in memory allocation; 30-minute periods if 48 periods are selected; 15-minute periods if 96 p...

  • Page 162: Employee

    156 x p-mode programming ser-7000 program manual employee the employee file contains information for register operators as well as employees who use the register only to clock in or out (employee time keeping.) specific functions that are allowed or disallowed for each employee are determined by ass...

  • Page 163

    Ser-7000 program manual p-mode programming x 157 employee program notes # field notes 3 clock in code enter a number (up to 10 digits in length) that will be used by this employee to clock in and/or out. 4 operating code enter the secret code number (up to 10 digits in length) that can be used to si...

  • Page 164

    158 x p-mode programming ser-7000 program manual edit job codes note: an employee with the appropriate authority level must be signed on to perform job code programming. Job codes are used to break down the hours worked for all employees into different categories (see "labor groups" report in the op...

  • Page 165

    Ser-7000 program manual p-mode programming x 159 edit pay rates note: an employee with the appropriate authority level must be signed on to perform pay rate programming. The pay rates to be used by all employees are set up here. There are 50 pay rates. E m p l o y e e # 0 1 p r o g r a m m i n g j o...

  • Page 166: Authority Levels

    160 x p-mode programming ser-7000 program manual authority levels each employee must be assigned to one of nine authority levels. See "employee" on page 57 to assign an employee to an authority level. The selections made here for each authority level determine the operations that are allowed for eac...

  • Page 167

    Ser-7000 program manual p-mode programming x 161 a u t h o r i t y l e v e l p r o g r a m m i n g a u t h o r i t y l e v e l : 1 2 3 4 5 6 7 8 9 2 0 . T i m e c l o c k e d i t n n n n n n n n n 2 1 . C a s h d e c l a r a t i o n n n n n n n n n n 2 2 . K / b a n d p r i c e l e v e l n n n n n n...

  • Page 168

    162 x p-mode programming ser-7000 program manual authority level program notes # field notes 14 destination change if y is set here, the operator has the option of selecting a destination (i.E. Eat-in, take out, drive thru) other than the default. 30 seat# for each entry if seat # is implemented, an...

  • Page 169

    Ser-7000 program manual p-mode programming x 163 authority level alpha descriptors 1. Select authority levels from the p- mode programming menu to display the programming screen. A u t h o r i t y l e v e l p r o g r a m m i n g alpha descriptors a u t h o r i t y l e v e l : 1 2 3 4 5 6 7 8 9 1 . C...

  • Page 170: Printer Tables & Kv Routing

    164 x p-mode programming ser-7000 program manual printer tables & kv routing the printing system of an ser-7000 register or system of registers is completely flexible. Up to 40 printers can be defined and connected to any available serial port on any register within a system. Multiple printer functi...

  • Page 171

    Ser-7000 program manual p-mode programming x 165 p r i n t e r & k v r o u t i n g m e n u 1 . System printer configuration 2 . K i t c h e n v i d e o r o u t i n g 3 . K i t c h e n p r i n t e r r o u t i n g 4 . R e c e i p t p r i n t e r r o u t i n g e s c e n t e r p a g e u p / d n n p p r ...

  • Page 172

    166 x p-mode programming ser-7000 program manual system printer routing use system printer routing to define the locations within the system for up to 40 possible system printers. S y s t e m p r i n t e r c o n f i g a l p h a p r t d e s c r i p t o r r g # - p # r g # - p # # 1 0 0 - 0 0 0 - 0 # ...

  • Page 173

    Ser-7000 program manual p-mode programming x 167 kitchen video routing use kitchen video routing to define the location of the video controller. If you wish to designate a backup printer in the event that the video system is not operational, enter the location of the back-up printer here. K i t c h ...

  • Page 174

    168 x p-mode programming ser-7000 program manual kitchen printer routing use kitchen printer routing to link the kitchen printer assignment made to items with actual printers. (see "plu status group" on page 38 to link a group of plus to a printer assignment number.) x because different registers mi...

  • Page 175

    Ser-7000 program manual p-mode programming x 169 r e g # 01 k i t c h e n p r t r o u t i period#1 p t k p k p k p k p k p k p k p k p k p 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r e g # 0 1 k i t c h e n p r t r o u t i period#1 p ...

  • Page 176

    170 x p-mode programming ser-7000 program manual receipt printer routing r e c e i p t p r i n t e r r o u t i n g r e g # p r t # r e g # p r t # 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1. Select receipt printer routing from the s-mode programming menu to disp...

  • Page 177: Ingredient Inventory

    Ser-7000 program manual p-mode programming x 171 ingredient inventory a menu-explosion type inventory system is set up when plus are linked to a recipe# (see "plu status group" on page 38.) select ingredient inventory from the p-mode programming menu to maintain recipe files and ingredient lists. Se...

  • Page 178

    172 x p-mode programming ser-7000 program manual edit ingredient i n g r e d i e n t p r o g r a m m i n g a l p h a i n g # d e s c r i p t o r c o s t 0 0 1 0 0 0 . 0 0 0 0 0 2 0 0 0 . 0 0 0 0 0 3 0 0 0 . 0 0 0 e s c y / n e n t e r p a g e u p / d n n p o m 1. Select edit ingredient from the ingr...

  • Page 179

    Ser-7000 program manual p-mode programming x 173 recipe table r e c i p e # 1 p r o g r a m m i n g d e s c r i p t o r i n g / r e c # d e s c r i p t o r q t y 0 0 1 i n g r e d 0 0 0 0 . 0 0 0 0 0 2 i n g r e d 0 0 0 0 . 0 0 0 0 0 3 i n g r e d 0 0 . 0 0 0 e s c y / n e n t e r p a g e u p / d n ...

  • Page 180: Time Activated Functions

    174 x p-mode programming ser-7000 program manual time activated functions t i m e a c t i v a t e d f u n c t i o n s m e n u 1. Keyboard levels 2 . P r i c e l e v e l s 3 . M a c r o s 4 . S t r i n g r e p o r t s e s c e n t e r p a g e u p / d n n p t i m e a c t i v a t e d f u n c t i o n s m...

  • Page 181

    Ser-7000 program manual p-mode programming x 175 time activated keyboard levels t i m e a c t i v a t e d k b d l e v e l # 1 a c t i v a t e a t ( 9 9 : 9 9 = d i s a b l e ) 9 9 : 9 9 w e e k : s u n m o n t u e w e d t h u f r i s a t y y y y y y y e s c y / n e n t e r p a g e u p / d n n p o m ...

  • Page 182

    176 x p-mode programming ser-7000 program manual time activated price levels t i m e a c t i v a t e d p r i c e l e v e l # 1 a c t i v a t e a t ( 9 9 : 9 9 = d i s a b l e ) 9 9 : 9 9 w e e k : s u n m o n t u e w e d t h u f r i s a t y y y y y y y e s c y / n e n t e r p a g e u p / d n n p o m...

  • Page 183

    Ser-7000 program manual p-mode programming x 177 time activated macros t i m e a c t i v a t e d m a c r o # 1 a c t i v a t e a t ( 9 9 : 9 9 = d i s a b l e ) 9 9 : 9 9 r e p e a t e v e r y ( m i n , 0 = n o r e p e a t ) 0 0 0 w e e k : s u n m o n t u e w e d t h u f r i s a t y y y y y y y e s...

  • Page 184

    178 x p-mode programming ser-7000 program manual time activated string reports t i m e a c t i v a t e s t r i n g r e p o r t # 1 a c t i v a t e a t ( 9 9 : 9 9 = d i s a b l e ) 9 9 : 9 9 r e p e a t e v e r y ( m i n , 0 = n o r e p e a t ) 0 0 0 w e e k : s u n m o n t u e w e d t h u f r i s a...

  • Page 185

    Ser-7000 program manual p-mode programming x 179 time activated shifts shift time programming determines the times of day financial totals are accumulated for the shift report. S h i f t t i m e p r o g r a m m i n g a l p h a s f t d e s c r i p t o r s t a r t / e n d t i m e 1 0 0 : 0 0 - 2 3 : 9...

  • Page 186

    180 x p-mode programming ser-7000 program manual kp time period kitchen printer routing can be defined for four periods (see "kitchen printer routing" on page 57.) if you define different routing for different periods, you can set the start and end times for the time periods here. For example, a res...

  • Page 187: Product Mix Groups

    Ser-7000 program manual p-mode programming x 181 product mix groups product mix groups can be used to implement a simplified ingredient system for tracking only essential ingredients associated with items (i.E. Cups for beverages or number of pieces for chicken menus.) product mix groups also report...

  • Page 188

    182 x p-mode programming ser-7000 program manual product mix items p r o d u c t m i x i t e m p g m a l p h a i t m # d e s c r i p t o r p c s / u n i t u n i t @ 0 0 1 0 0 0 0 0 2 0 0 0 0 0 3 0 0 0 e s c y / n e n t e r p a g e u p / d n n p o m 1. Select product mix items from the product mix gr...

  • Page 189

    Ser-7000 program manual p-mode programming x 183 product mix group time periods memory allocation determines whether there are 24, 48, or 96 product mix group time periods. Product mix group time periods will default to hourly periods if 24 periods are selected in memory allocation; 30-minute period...

  • Page 190: Custom Report Programming

    184 x p-mode programming ser-7000 program manual custom report programming one custom report can be created. Also, on the financial or employee report, any total may be deleted, or printed in red (provided the printer has red/black printing capability.) r e p o r t p r o g r a m m i n g 1.Custom rep...

  • Page 191

    Ser-7000 program manual p-mode programming x 185 custom report one custom report can be created, with up to 50 totals and counters. The report is built by selecting totals that also appear on either the financial or sales by time period reports. When the custom report is created, totals and counters...

  • Page 192

    186 x p-mode programming ser-7000 program manual custom report program notes field notes rpt# with the field selected, press done to display the report list. Enter or select the number of the report from which the total you wish to place on the custom report originates. Ttl# with the field selected,...

  • Page 193

    Ser-7000 program manual p-mode programming x 187 edit existing reports r e p o r t p r o g r a m m i n g 1 . C u s t o m r e p o r t s 2. Edit existing reports 1. Financial report 2 . E m p l o y e e r e p o r t n n p 1. Select edit existing reports from the report programming menu, then from the po...

  • Page 194: String Reports

    188 x p-mode programming ser-7000 program manual string reports s t r i n g r e p o r t # 1 p r o g r a m m i n g d e s c r i p t o r s t r i n g r e p o r t # 1 # x / z l e v e l r p t # d e s c r i p t o r 0 0 x 0 0 0 0 1 x 0 0 0 0 2 x 0 0 0 e s c y / n e n t e r p a g e u p / d n n p o m 1. Selec...

  • Page 195: Plu Stock

    Ser-7000 program manual p-mode programming x 189 plu stock plu stock is a simple inventory system where each whole unit plu activity subtracts a value of "1" from the stock counter. (note that if multiplication or decimal multiplication is used when the plu is registered, the resulting quantity of a...

  • Page 196

    190 x p-mode programming ser-7000 program manual p l u # 00000000000000 s t o c k - a d d x p r e s s p l u t o b e p r o g r a m m e d o r x e n t e r p l u n u m b e r – [ e n t e r ] p l u # e s c e n t e r i n d i v i d u a l p l u p l u # 0 0 0 0 0 0 0 0 0 0 0 0 0 1 s t o c k - a d d d e s c r ...

  • Page 197: Plu Minimum Stock

    Ser-7000 program manual p-mode programming x 191 plu minimum stock p l u # 00000000000000 m i n . S t o c k p g m x p r e s s p l u t o b e p r o g r a m m e d o r x e n t e r p l u n u m b e r – [ e n t e r ] p l u # e s c e n t e r i n d i v i d u a l p l u p l u # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 m i ...

  • Page 198: Copy Program

    192 x p-mode programming ser-7000 program manual copy program this function allows you to duplicate programs for: x plus x plu status groups x keyboard levels x wlus for example, all program options for one plu can be duplicated on another plu. Note: see “general function options” on page 57. If gen...

  • Page 199

    Ser-7000 program manual p-mode programming x 193 c o p y p r o g r a m 1. Copy plu 2 . C o p y p l u s t a t u s g r o u p 3 . C o p y k e y b o a r d l e v e l 4 . C o p y w l u 5 . C o p y g r o u p s b y e m p l o y e e 00000000000000 3. At the pop-up window, enter the # you wish to copy from, pr...

  • Page 200: Program File Download

    194 x p-mode programming ser-7000 program manual program file download download files only to ram cleared registers. Download memory allocation separately first. The all files selection does not include memory allocation. P r o g r a m f i l e d o w n l o a d 1. All files 2 . S e l e c t p r o g r a...

  • Page 201

    Ser-7000 program manual p-mode programming x 195 select program files d o w n l o a d p r o g r a m f i l e s e l e c 1 . R e g i s t e r : a l l r e g i s t e r s 2 . P r o g r a m f i l e s e l e c t i o n d a t e & t i m e n p l u n p l u s t a t u s g r o u p n g r o u p n f u n c t i o n k e y ...

  • Page 202

    196 x p-mode programming ser-7000 program manual d o w n l o a d p r o g r a m f i l e s e l e c p a y r a t e n a u t h o r i t y l e v e l n s y s t e m p r i n t e r c o n f i g . N k i t c h e n v i d e o r o u t i n g n k i t c h e n p r i n t e r r o u t i n g n r e c e i p t p r i n t e r r o...

  • Page 203

    Ser-7000 program manual p-mode programming x 197 all files 1. Choose all files from the program file download screen to display the downloading register selection screen. D o w n l o a d i n g r e g i s t e r s e l e c t 1 . R e g i s t e r : a l l r e g i s t e r s e s c y / n e n t p g u p / d n n...

  • Page 204: P-Mode Program Scan Printing

    198 x p-mode programming ser-7000 program manual p-mode program scan printing this function allows you to print copies of the register’s p-mode programming. P - m o d e p r o g r a m s c a n p r i n t i n g 1. Plu by range 2 . P l u b y p l u s t a t u s g r o u p 3 . P l u b y s e l e c t e d p r i...

  • Page 205

    Ser-7000 program manual p-mode programming x 199 p - m o d e p r o g r a m s c a n p r i n t i n g 21.String report 2 2 . P l u s t o c k b y r a n g e 2 3 . P l u m i n i m u m s t o c k b y r a n g e 2 4 . N o n - p l u c o d e 2 5 . T a r e w e i g h t s p - m o d e p r o g r a m s c a n p r i n ...

  • Page 206: Non-Plu Code

    200 x p-mode programming ser-7000 program manual non-plu code the non-plu code program must be set if you wish to scan upcs (using the ean 13 code) with embedded prices, weights or quantities. Within the ean 13 code, the first two digits (part a) are used as an identifier and the last digit (part c)...

  • Page 207

    Ser-7000 program manual p-mode programming x 201 n o n - p l u # 1 ( p l u # 0 2 ˜ ) p r o g r a l e n g t h o f f i e l d 1 ( = p l u c o d e ) 0 l e n g t h o f f i e l d 2 0 c o n t e n t o f f i e l d 2 p r i c e u s e p r i c e c h e c k d i g i t ? N t a b o r d e c . P o i n t o f f i e l d 2...

  • Page 208: Plu & Wlu Key Assignment

    202 x p-mode programming ser-7000 program manual plu & wlu key assignment p l u & w l u k e y r e l o c a t i o n 1. Plu keys 2 . W l u k e y s e s c e n t e r p a g e u p / d n n p p l u & w l u k e y r e l o c a t i o n 1 . Plu keys 1. Kbd level 1 2 . W l u k e y s 2 . K b d l e v d l 2 3 . K b d ...

  • Page 209

    Ser-7000 program manual p-mode programming x 203 plu key assignment this process assigns the plu number that is registered when a plu key is operated. 1. Press any plu key to read and/or change the current assignment, or press esc to exit. P l u k e y r e l o c a t i o n p r o g r a m m i n g k e y ...

  • Page 210

    204 x p-mode programming ser-7000 program manual wlu key assignment this process assigns the wlu number that is displayed when a wlu key is operated. 1. Press any wlu key to read and/or change the current assignment, or press esc to exit. W l u k e y r e l o c a t i o n p r o g r a m m i n g k e y b...

  • Page 211: Bitmap File Download

    Ser-7000 program manual p-mode programming x 205 bitmap file download if you are printing a bitmap image on a printer (use must be using a printer with bitmap image capability) you can send the bitmap to the printer using this program. B i t m a p f i l e d o w n l o a d port#1 p o r t # 2 p o r t #...

  • Page 212: Groups By Employee

    206 x p-mode programming ser-7000 program manual groups by employee if you choose to use groups by employee (see "memory allocation" on page 36) you can select which of the 99 available groups are reported for each employee. For example, you may wish to report only food related groups for servers an...

  • Page 213: Employee Card Read Format

    Ser-7000 program manual p-mode programming x 207 employee card read format e m p l o y e e c a r d r e a d f o r m a t 1 . R e a d t r a c k 1 2 . C a r d i d 0 0 0 0 0 0 0 0 0 0 3 . C h e c k c a r d i d n 4 . C o l u m n o f c a r d i d s t a r t 0 0 d i g i t 0 0 e s c y / n e n t e r p a g e u p...

  • Page 214: Age Verification

    208 x p-mode programming ser-7000 program manual age verification sale of age-restricted items (i.E. Alcohol, tobacco) can be controlled at the point of sale by forcing to operator to enter a date of birth before a controlled item can be registered. Because you may wish to use this feature for items...

  • Page 215: Mix & Match Table

    Ser-7000 program manual p-mode programming x 209 mix & match table retailers often offer discounts when multiples of different items are purchased. For example, the offer: “save $5 on any three bottles of wine” can be handled by a mix and match discount. The default s er-7000 can accommodate up to 5...

  • Page 217: Appendices

    Ser-7000 program manual appendices x 211 appendices.

  • Page 218: Pin Descriptions

    212 x appendices ser-7000 program manual register communications ports standard ports port connector type ethernet standard rj45/8 wire serial #1 pc type db9/male serial #2 standard rj45/8 wire serial #3 standard rj45/8 wire drawer 2 standard rj45/6 wire optional ports port connector type serial #4 ...

  • Page 219: Loop Back Connections

    Ser-7000 program manual appendices x 213 loop back connections serial 1 (dsub9) 1. /dcd 2. Rxd 3. Txd 4. /dtr 5. Gnd 6. /dsr 7. /rts 8. /cts 9. Vcc irc (rj-45) 1. Tptx+ 2. Tptx- 3. Tprx+ 4. Nc 5. Nc 6. Tprx- 7. Nc 8. Nc serial 2-4 (rj-45) 1. Vcc 2. /dsr 3. Txd 4. Rxd 5. Nc 6. Nc 7. Gnd 8. /dtr.

  • Page 220: System Configurations

    214 x appendices ser-7000 program manual system configurations inter register communications each ser-7000 includes a standard ethernet communications port. This port is used for all register-to-register communications. Except for 2-registers configurations, registers are linked by connecting each r...

  • Page 221

    Ser-7000 program manual appendices x 215 crossover cable ethernet specifications more information to be supplied at a later time. Hub speed 10 mbps (10 million bits per second) 1 rd+ 2 rc- 3 td+ 6 td- rd+ 1 rc- 2 td+ 3 td- 6.

  • Page 222

    216 x appendices ser-7000 program manual requisition printers requisitions can be directed from any register to any printer in the system. For example, at a food service counter with 3 registers and three preparation areas, registers and printers might be connected in a system as in the diagram belo...

  • Page 223: Glossary of Terms

    Ser-7000 program manual glossary of terms x 217 glossary of terms activity count the activity counter keeps track of the number of times an entry is made on a plu, or function key. Add check the add check function is used to add multiple guest checks (tracking balances or soft checks) for payment to...

  • Page 224

    218 x glossary of terms ser-7000 program manual auto scale registrations of plus with auto scale status will automatically multiply by the weight placed upon a scale connected to the register. Use for items such as produce that are always sold by weight. Auto tare with auto tare status assigned, a p...

  • Page 225

    Ser-7000 program manual glossary of terms x 219 continue use the continue function to override the pop-up employee function after a transaction. Allows the employee to post an additional transaction without signing on again. Currency conversion use one of the 5 available currency conversion function...

  • Page 226

    220 x glossary of terms ser-7000 program manual error correct an error correct operation voids the last item entered, it must be used within a sale. Food stamps in the united states, food stamps may be used to purchase eligible food items at food stores that participate in the program. The ser-7000 ...

  • Page 227

    Ser-7000 program manual glossary of terms x 221 job codes job codes are used to break down the hours worked for all employees into different categories (see "labor groups" report in the operation manual.) a breakdown of hours by job is also reported for each employee (see "time keeping" reports in t...

  • Page 228

    222 x glossary of terms ser-7000 program manual non-plu code the non-plu code program must be set if you wish to scan upcs (using the ean 13 code) with embedded prices, weights or quantities. Within the ean 13 code, the first two digits (part a) are used as an identifier and the last digit (part c) ...

  • Page 229

    Ser-7000 program manual glossary of terms x 223 this is a calculation function only, and no totals or counters are updated by the use of this feature. Price level prices may be assigned at up to five different price levels for each item. One of up to 20 price level keys is identified for each differ...

  • Page 230

    224 x glossary of terms ser-7000 program manual subtract from the stock counter. Stock is maintained increments to the second decimal position, i.E. "x.Xx".) super macro the super macro records transaction keystrokes, including key position changes. The size of the super macro, in keystrokes, is set...

  • Page 231

    Ser-7000 program manual glossary of terms x 225 wlu wlu stands for window look up. A wlu pops up and displays a list of items on the operator screen. Three types of items that can be found on a window look-up (wlu): condiments, functions, and plus. Typically, a wlu is used to display a list of instr...

  • Page 232

    226 x glossary of terms ser-7000 program manual.

  • Page 233: Index

    Ser-7000 program manual index x 227 index # #/no sale 89 #/no sale 7 % %1 - %10 8, 91 a add check 4 add on taxes 134 alpha characters entering 16 alpha code chart 18 alpha code entry 102 alpha overlay 16 authority level alpha descriptors 162 link to 156 authority levels programming 159 auto clear er...

  • Page 234

    228 x index ser-7000 program manual cursor control keys ( npmo) 5 custom report 183 cutting after printing 53 d data bits 53 date setting 24 decimal 5 decimal position 48 default keyboard 2 default keyboard level 111 default messages load 58 default price level 111 delete plus 65 descriptors report ...

  • Page 235

    Ser-7000 program manual index x 229 j job code 156 job codes edit 157 k key relocation function key 44 plu 41 wlu 42 keyboard er-5240 3 keyboard key relocation 40 keyboard level 111 default 111 keyboard level 1-5 6 keyboard levels time activated 174 keys, register 11 kitchen printer routing 167 kitc...

  • Page 236

    230 x index ser-7000 program manual auto tare# 68 compulsory condiment 67 compulsory non-add # 68 compulsory validation 68 condiment 67 copy by range 102 delete 65 delete by range 66 do not display 68 eligible for canadian donut law 69 embedded price 199 food stamp eligible 68 function key 8 gallona...

  • Page 237

    Ser-7000 program manual index x 231 reports edit existing 186 string 187 requisition printers 214 retrys 53 rom file download 58 rounding tax 107 rounding 101 routing detail printer 169 kitchen printer 167 kitchen video 166 receipt printer 169 rtc setting 24 s scale 9 scale (function key) 95 scaleab...

  • Page 238

    232 x index ser-7000 program manual time setting 24 tip (1-3) 10 tip 1-3 97 tip declare 98 tip declare 10 tracking file options 113 training mode options 110 transfer check automatic 113 transfer totals 113 transfer check (1-4) 10 tray subtl 10 tray subtotal 98 v valid 10 validation message 118 vali...