1. DL manuals
  2. Sam4s
  3. Cash Register
  4. SER-7000
  5. Operation Manual

Sam4s SER-7000 Operation Manual

Manual is about: SER-7000 Series

Summary of SER-7000

  • Page 1

    Ser-7000/7040 operation manual all specifications are subject to change without notice. V1.01 contact you authorized sam4s dealer for sales, service and support. Dealer imprint:.

  • Page 2

    Attention the product that you have purchased contains a rechargeable ni-mh battery. This battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials...

  • Page 3: Contents

    Ser-7000 operation manual contents x i contents keyboard 1 g about the s er-7000 series ....................................................................................................... 1 g default keyboard – ser-7000................................................................................

  • Page 4

    Ii x contents ser-7000 operation manual open plu/item entries .............................................................................................37 g preset plu/item entries ............................................................................................39 g condiment/plu/funct...

  • Page 5

    Ser-7000 operation manual contents x iii split payment .......................................................................................................... 131 g tray subtotal ........................................................................................................... 132 g fore...

  • Page 6

    Iv x contents ser-7000 operation manual definitions ...............................................................................................................194 g plu stock.............................................................................................................................

  • Page 7: Keyboard

    Ser-7000 operation manual keyboard x 1 keyboard about the s er-7000 series the s er-7000 series is offered in two different versions: x the s er-7000 features a flat 160-position keyboard with 107 nlu keys. Because it offers protection from spills, this keyboard works best in restaurants, food servi...

  • Page 8

    2 x keyboard ser-7000 operation manual default keyboard – ser-7000 . 46 76 66 56 1 sbtl 3 2 8 36 26 17 86 %3 106 96 45 75 65 55 4 check 6 5 7 35 25 16 85 %2 105 95 44 74 64 54 7 misc 1 9 8 6 34 24 15 84 %1 104 94 40 70 60 50 cancel enter keyb lvl 1 2 30 20 11 80 tax1 shift 100 90 39 69 59 49 err cor...

  • Page 9: Alpha Overlay

    Ser-7000 operation manual keyboard x 3 alpha overlay 1 sbtl 3 2 %3 4 check 6 5 %2 7 misc 1 9 8 %1 ] [ t i u y trans void enter keyb lvl 1 q r e w o tax1 shift \ p % * & ^ err corr mdse rtrn void item page up ! $ # @ ( price lvl 2 – ) g k j h yes/no recall check page down keyb lvl 2 a f d s l macro 1...

  • Page 10: Default Keyboard - Ser-7040

    4 x keyboard ser-7000 operation manual default keyboard - ser-7040 the s er-7040 keyboard is shown below with the default legends and key assignments. This configuration has 15 keyboard nlu locations and can be expanded to 40 nlu locations. Programmable key locations are shown with a bold border. Ex...

  • Page 11: Key Descriptions

    Ser-7000 operation manual keyboard x 5 key descriptions key description 0 - 9, 00, 000 (numeric keys) used in all modes to enter numeric information such as prices or quantities. Add check use to add multiple guest checks (tracking balances or soft checks) for payment together. See "tray subtl" on p...

  • Page 12

    6 x keyboard ser-7000 operation manual key description cursor control keys ( npmo ) 1. On menu screens, press the up or down keys to move the cursor to the menu item you wish to select. 2. On program screens, press the cursor control keys (up, down, left, right) to move the cursor (highlighted field...

  • Page 13

    Ser-7000 operation manual keyboard x 7 key description guest # use to record the number of guests served by a transaction. The entry may be compulsory. The entry appears on receipts and at the kitchen printer/kvs. Hold use to identify an individual item, or an entire transaction so that the designat...

  • Page 14

    8 x keyboard ser-7000 operation manual key description misc tend # access any of the 16 possible miscellaneous tender functions by entering the tender number (1-16) and pressing the misc tend # key. Modifier 1-10 preceding a plu entry, a modifier key changes a digit of the plu number, causing a diff...

  • Page 15

    Ser-7000 operation manual keyboard x 9 key description park order used in conjunction with a kitchen video system and the serve order function key. Enter a number and press park order to park or "suspend" an order on the video monitor until the order is completely filled. In the case of a drive thro...

  • Page 16

    10 x keyboard ser-7000 operation manual key description receipt on/off press receipt on/off to toggle the receipt function from on to off. You must first have a receipt printer connected, identified to the register, and the print receipt automatically option (see general printing options) turned on....

  • Page 17

    Ser-7000 operation manual keyboard x 11 key description store check 1-4 the check tracking system can maintain only balances (hard check) or entire transactions (soft check) in the register memory. Four different tracking files can be separated to maintain, for example, restaurant checks, call-in or...

  • Page 18

    12 x keyboard ser-7000 operation manual key description waste used to start and end entries of items that are wasted. A waste count is maintained for each item and inventory is adjusted. Wlu use to access a wlu by entering the numeric wlu number and pressing the wlu key. X/time use the x/time key to...

  • Page 19: Display

    Ser-7000 operation manual display x 13 display display adjustments front view by pushing on the bottom or top of the display, you can move the display to a different viewing angle. Contrast adjustment in the reg key lock position, press the page up key repetitively to increase contrast; press the pa...

  • Page 20: Cursor Control (

    14 x display ser-7000 operation manual cursor control ( n p m o ) the cursor control ( n p m o ) keys are used to select an item (on operation screens or wlus) or a field (on program screens). Selecting an item the cursor on the screen is the highlighted item. On the register mode screen, the last i...

  • Page 21

    Ser-7000 operation manual display x 15 page up and page down use the page up and page dn keys to view information that will not display completely on the screen. For example: 1. The display is shown with the maximum of 6 items displayed. 1 p l u # 1 $ 1 . 0 0 1 p l u # 2 $ 2 . 0 0 1 p l u # 3 $ 3 . ...

  • Page 22: Display Messages

    16 x display ser-7000 operation manual display messages age restriction the item cannot be registered due to age verification. Amount required this operation requires an amount entry. Available only in check a guest check must be opened for this operation. Bad value the number entered is wrong. Buff...

  • Page 23

    Ser-7000 operation manual display x 17 eat-in/take-out/drive- thru this operation requires a depression of either the eat-in, take- out, or drive-thru keys. Employee should be different you cannot transfer a check from same employee to same employee. Enter employee code employee is required to sign ...

  • Page 24

    18 x display ser-7000 operation manual multiplication limit exceeded the maximum digits for multiplication (set in general function options) has been exceeded. Negative this sale has gone negative. Negative sales are not allowed. No check # can not find this guest check number. No data plu can not b...

  • Page 25

    Ser-7000 operation manual display x 19 sign off required operation requires the employee to sign off. Scale fail! The register is not able to find the scale. Scale motion scale error; the weight is not stable on the scale. Scale required! This item requires a quantity entry (weight) via the scale ke...

  • Page 26

    20 x display ser-7000 operation manual.

  • Page 27: Operation Sequences

    Ser-7000 operation manual operation sequences x 21 operation sequences control lock i turn the control lock to the reg position to operate the register. Void pgm z x reg off s mode void off reg x z pgm s mode use to void (correct) items outside of a sale. The register is inoperable. (register) use f...

  • Page 28: Employee Sign-On/sign-Off

    22 x operation sequences ser-7000 operation manual employee sign-on/sign-off program notes for clerk operation x choose between "push button", "secret code", "employee number", or "mcr" for the employee sign on method. (see "system option programming/general function options" in the program manual. ...

  • Page 29

    Ser-7000 operation manual operation sequences x 23 push button entry method - stay down l 1 p 0 1 1. The message “enter employee code” displays when the register is in the reg (register) control lock position and is in a signed off condition. L 1 p 0 1 2. Press the employee (1-10) key to sign on. Th...

  • Page 30

    24 x operation sequences ser-7000 operation manual push button entry method - pop-up l 1 p 0 1 1. The message “enter employee code” displays when the register is in the reg (register) control lock position and is in a signed off condition. L 1 p 0 1 2. Press the employee (1-10) key to sign on. The e...

  • Page 31

    Ser-7000 operation manual operation sequences x 25 code entry method - stay-down l 1 p 0 1 1. The message “enter employee code” displays when the register is in the reg (register) control lock position and is in a signed off condition. L 1 p 0 1 2. Enter the employee number, press the emp# key to si...

  • Page 32

    26 x operation sequences ser-7000 operation manual code entry method - pop-up l 1 p 0 1 1. The message “enter employee code” displays when the register is in the reg (register) control lock position and is in a signed off condition. L 1 p 0 1 2. Enter the employee number, press the emp# key to sign ...

  • Page 33

    Ser-7000 operation manual operation sequences x 27 sign off/quit the quit key or the sequence 0 emp# will sign off the current employee. 1. Press quit . The "enter employee code" message displays. Or: 1 p l u # 1 2 $ 1 2 . 0 0 1 p l u # 1 2 $ 1 2 . 0 0 t a x 0 . 0 0 l 1 p 0 1 c a s h 2 4 . 0 0 2. En...

  • Page 34

    28 x operation sequences ser-7000 operation manual training mode - clock-in and sign-on the entire register can be locked into training mode. Turn the key to the x control lock position and select training from the x-mode manager menu. See "x mode procedures" for more information. * * * * * * t r a ...

  • Page 35: Time Clock Procedures

    Ser-7000 operation manual operation sequences x 29 time clock procedures clock-in entry 1. Enter the employee number and press time in/out . T i m e c l o c k - i n # 0 0 1 a n n i e w d a t e : f r i 7 / 1 0 / 2 0 0 3 t i m e 2 0 : 5 5 j o b c o d e : 1 s u m m a r y 1 1 m a n a g e r : - : 2 s e r...

  • Page 36

    30 x operation sequences ser-7000 operation manual clock out for break 1. Enter the employee number and press time in/out . T i m e c l o c k - i n # 0 0 1 a n n i e w d a t e : f r i 7 / 1 0 / 2 0 0 3 t i m e 2 0 : 5 5 j o b c o d e : 1 s u m m a r y 1 1 : o u t f o r b r e a k : - : 2 : o u t : - ...

  • Page 37

    Ser-7000 operation manual operation sequences x 31 clock in from break 1. Enter the employee number and press time clock . T i m e c l o c k - i n # 0 0 1 a n n i e w d a t e : f r i 7 / 1 0 / 2 0 0 3 t i m e 2 0 : 5 5 j o b c o d e : 1 s u m m a r y 1 1 m a n a g e r : - : 2 s e r v e r : - : 3 h e...

  • Page 38

    32 x operation sequences ser-7000 operation manual clock out for the day 1. Enter the employee number and press time in/out . T i m e c l o c k - i n # 0 0 1 a n n i e w d a t e : f r i 7 / 1 0 / 2 0 0 3 t i m e 2 0 : 5 5 j o b c o d e : 1 s u m m a r y 1 1 m a n a g e r : - : 2 s e r v e r : - : 3 ...

  • Page 39: Outside of Sale Functions

    Ser-7000 operation manual operation sequences x 33 outside of sale functions time display d a t e : w e d 0 4 / 2 6 / 2 0 0 4 t i m e : 0 8 : 5 1 : 5 5 a m o p e r a t o r : e m p l o y e e 1 r e g : 0 1 s e r - 7 0 0 0 0 . 9 9 d n o v . 2 6 2 0 0 3 l 1 1. Press x/time to display the time and regist...

  • Page 40

    34 x operation sequences ser-7000 operation manual selecting price levels levels may be set by: x function key x x-mode menu selection x time control function key selection is shown here. 1. Press price lvl# 1 . L 1 p 0 1 2. Press price lvl# 2 . L 1 p 0 2 3. Press price lvl# 5 . L 1 p 0 5 no sale 1....

  • Page 41

    Ser-7000 operation manual operation sequences x 35 received on account (loan) 1. Press the appropriate received on account key, i.E. R/a #1 . R e c d a c c t 1 0.00 0 . 0 0 c a s h 0 . 0 0 c h e c k 0 . 0 0 m i s c t e n d # 0 . 0 0 t o t a l r o l1 cash check misc tend# done r e c d a c c t 1 0.00 ...

  • Page 42

    36 x operation sequences ser-7000 operation manual paid out (pick up) 1. Press the appropriate received on account key, i.E. R/a #1 . P a i d o u t 1 0.00 0 . 0 0 c a s h 0 . 0 0 c h e c k 0 . 0 0 m i s c t e n d # 0 . 0 0 t o t a l r o l1 cash check misc tend# done p a i d o u t 1 0.00 1 0 . 0 0 c ...

  • Page 43: Item Registrations

    Ser-7000 operation manual operation sequences x 37 item registrations open plu/item entries keyboard plu r o l 1 p 0 1 note: to prevent operator confusion, taxes and total information does not appear until the first item is registered. Press clear to clear the display of any previous transaction inf...

  • Page 44

    38 x operation sequences ser-7000 operation manual repeat 1. Enter the amount of the item. 2. Press plu #1 . 3. Press plu #1 again to register the second item. 2 plu #1 $2.46 l 1 p 0 1 t a x 0 . 0 0 t o t a 2 . 4 6 multiplication 1. Enter the quantity. 2. Press x/time . 3. Enter the amount of the it...

  • Page 45

    Ser-7000 operation manual operation sequences x 39 preset plu/item entries keyboard plu 1. Press plu #2 . 1 plu #2 $2.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 2 . 0 0 code entry plu 1. Enter the plu code number. 2. Press plu . 1 plu #11 $11.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 1 1 . 0 0

  • Page 46

    40 x operation sequences ser-7000 operation manual condiment/plu/function entry from a wlu what is a wlu? Wlu stands for “window look up”. A wlu window displays on the operator screen. X a wlu can be triggered by registering a plu that is programmed to activate a wlu, x by pressing a wlu function ke...

  • Page 47

    Ser-7000 operation manual operation sequences x 41 wlu applications a wlu can list plus with condiment status, ordinary plus, and/or functions. X a wlu listing condiments may be linked to an item so that immediately after the item is registered, condiment options for that item are displayed. X a wlu...

  • Page 48

    42 x operation sequences ser-7000 operation manual viewing a wlu in this example a wlu with the title “condiments” is programmed with 13 items. Plu #7 is set to activate the wlu. 1. Press plu #7 . The wlu displays with the first condiment item highlighted. 1 hot dog 1.69 l 1 p 0 1 t a x 0 . 0 0 t o ...

  • Page 49

    Ser-7000 operation manual operation sequences x 43 selecting a single item from a wlu by cursor selection in this example a wlu with the title “condiments” is programmed with 13 items. The wlu is set to close automatically after one item is selected. Plu #7 is set to activate the wlu. 1. Press plu #...

  • Page 50

    44 x operation sequences ser-7000 operation manual selecting a single item from a wlu by numeric selection in this example a wlu with the title “condiments” is programmed with 13 items. The wlu is set to close automatically after one item is selected. Plu #7 is set to activate the wlu. 1. Press plu ...

  • Page 51

    Ser-7000 operation manual operation sequences x 45 selecting multiple items from a wlu - closing with the done key in this example a wlu with the title “condiments” is programmed with 13 items. The wlu is set to allow multiple items selection and can be closed with the done key. Plu #7 is set to act...

  • Page 52

    46 x operation sequences ser-7000 operation manual entering an item from a wlu without opening the wlu window in this example item #10 from wlu #8 is registered without opening the wlu window. 1. Enter an item that is not linked to a wlu. 2. Type 10 , press wlu#8 (or type 8 and press the wlu key.) 1...

  • Page 53

    Ser-7000 operation manual operation sequences x 47 multiplication of condiments in a wlu in this example a wlu with the title “chicken” is programmed with 3 items describing the ways chicken can be prepared. The wlu is set to require eight item choices and item multiplication is set to y(es). Plu #8...

  • Page 54

    48 x operation sequences ser-7000 operation manual 7. Press x/time . 8. Enter 3 . 9. Press enter . (the input qty prompt and wlu window clear when the total quantity required of eight has been fulfilled.).

  • Page 55

    Ser-7000 operation manual operation sequences x 49 multiple wlus a wlu maybe linked to another wlu, so that when the first wlu is completed, the second is automatically displayed. In this example, the first wlu displays the choices of potato for the item. The potato wlu is linked to the soup/salad w...

  • Page 56

    50 x operation sequences ser-7000 operation manual 7. The dressing wlu is closed. 1 p r i m e r i b 9 . 6 9 b a k e d s a l a d f r e n c h l 1 p 0 1 t a x 0 . 0 0 t o t a 9 . 6 9.

  • Page 57

    Ser-7000 operation manual operation sequences x 51 plu registration from window look up (wlu) a wlu can serve as a menu of plus that are not located on the keyboard. In a restaurant, for example, a wine or liquor item list could be on a wlu menu to save space on the keyboard. The capacity of a wlu i...

  • Page 58

    52 x operation sequences ser-7000 operation manual open plu registration from window look up (wlu) 4. If the plu requires an amount entry, a prompt will display. 1 s h r i m p c t l $ 4 . 5 0 l 1 p 0 1 t a x 0 . 0 0 t o t a 4 . 5 0 5. Type the amount, press plu . 1 s h r i m p c t l $ 4 . 5 0 1 o p ...

  • Page 59

    Ser-7000 operation manual operation sequences x 53 price level shift the current price level can be set by an x mode program, by price level key, or automatically by the time of day or day of week. Price levels can be locked into a specific level (stay down) or they can return to a default level aft...

  • Page 60

    54 x operation sequences ser-7000 operation manual scale items the ser-7000 can be interfaced to an electronic scale, allowing direct entry of the item's weight by using the scale key. Scale program notes: x see "p-mode programming", "plu status group" in the program manual . The following options a...

  • Page 61

    Ser-7000 operation manual operation sequences x 55 direct scale entry 1. Place the item on the scale. 2. Press the scale key to display the weight. L 1 p 0 1 3. Register the open or preset plu. 2 . 2 3 l b s @ 1 . 0 0 b a n a n a s $ 2 . 2 3 l 1 p 0 1 t a x 0 . 0 0 t o t a 2 . 2 3 manual weight entr...

  • Page 62

    56 x operation sequences ser-7000 operation manual auto tare weight in this example, the tare weight of 0.10 lbs. Is automatically subtracted when the ice cream plu is registered. 1. Place the item on the scale. 2. Press the scale key to display the weight. L 1 p 0 1 3. Register the open or preset p...

  • Page 63

    Ser-7000 operation manual operation sequences x 57 open tare weight entry 1. Place the item on the scale. L 1 p 0 1 l 1 p 0 1 2. Press 20 . This will call for tare 20, which is an open tare. 3. Press the scale 4. Press the decimal [.], then the numeric 3 . This will enter a tare weight of 0.3 lb. 5....

  • Page 64

    58 x operation sequences ser-7000 operation manual print key the print key allows the operator to send items to the kitchen printer. Use the print key (or label the key grill) to send items wouldn't normally go to a kitchen printer or send items that require special attention. All printer output mad...

  • Page 65

    Ser-7000 operation manual operation sequences x 59 auto grill item some items may be programmed as "auto grill" so they will always be sent to the designated grill printer. The advantage of using auto grill is the item is sent to the printer immediately when the next item is registered, or when the ...

  • Page 66

    60 x operation sequences ser-7000 operation manual promo the promo key allows the operator to account for promotional items (i.E. By two, get one free). This key will remove the cost of the item from the sale, but not the count. In the case of by two, get one free the count remains three items, but ...

  • Page 67

    Ser-7000 operation manual operation sequences x 61 waste the waste key allows control of inventory by accounting for items that must be removed from stock due to spoilage, breakage, or mistakes. The waste key may be under manager control, requiring the control lock to be in the x position. The waste...

  • Page 68

    62 x operation sequences ser-7000 operation manual price inquiry use the price inq key to check the price of an item without registering it. 1. Press price inq . 2. Enter the plu number and press the plu key. L 1 p 0 1 3. Press the plu key again if you wish to register the item. 1 p l u # 1 $ 1 . 0 ...

  • Page 69

    Ser-7000 operation manual operation sequences x 63 food stamp shift note: display (yes or no) of food stamp eligible indicators is controlled by an option flag. In the following examples: x tax 1 is 6% x plu #15 is taxable by tax 1 and is not food stamp eligible x plu #16 is taxable by tax 1 and is ...

  • Page 70

    64 x operation sequences ser-7000 operation manual tax shift and tax exemption note: display (yes or no) of taxable item indicators is controlled by an option flag. See “tax options” in the program manual . In the following examples: x tax 1 is 6%, tax 2 is 10% x plu #11 is nontaxable x plu #12 is t...

  • Page 71

    Ser-7000 operation manual operation sequences x 65 adding tax to a non-taxable item to charge tax 1, press tax shift1 ; to charge tax 2, press tax shift2 ; to charge multiple taxes, press each of the appropriate tax shift keys, 1. Press plu#11 . 2. Press tax shift1 . 3. Press plu#11 . 1 p l u # 1 1 ...

  • Page 72

    66 x operation sequences ser-7000 operation manual 4. Press tax exempt . 1 p l u # 1 2 t x 1 $ 1 2 . 0 0 1 plu #12 t x 1 $12.00 l 1 p 0 1 t a x 0 . 0 0 t o t 2 4 . 0 0 5. Press cash . 1 p l u # 1 2 t x 1 $ 1 2 . 0 0 1 p l u # 1 2 t x 1 $ 1 2 . 0 0 t a x 0 . 0 0 l 1 p 0 1 c a s h 2 4 . 0 0 subtotal.

  • Page 73

    Ser-7000 operation manual operation sequences x 67 tax exemption with tax shift keys 1. Press plu#12 . 2. Press plu#12 . 1 p l u # 1 2 t x 1 $ 1 2 . 0 0 1 plu #12 t x 1 $12.00 l 1 p 0 1 t a x 1 . 4 4 t o t 2 5 . 4 4 3. Press sbtl . 1 p l u # 1 2 t x 1 $ 1 2 . 0 0 1 plu #12 t x 1 $12.00 l 1 p 0 1 t a...

  • Page 74

    68 x operation sequences ser-7000 operation manual canadian donut tax exemption x plu #15 & #16 are taxable and are linked to a status group with the option "eligible for canadian donut law? " set as "y". X the tax-exempt quantity is set at "6". 1. Press plu#15 . 2. Press plu#16 . 3. Press plu#15 . ...

  • Page 75: Corrections

    Ser-7000 operation manual operation sequences x 69 corrections clear 1. Press numeric keys, i.E. 4 , 5 , 6 . L 1 p 0 1 4 5 6 2. Press clear . L 1 p 0 1 error correct 1. Register an item. 1 plu #2 $2.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 2 . 0 0 2. Press err corr . L 1 p 0 1 t a x 0 . 0 0 t o t a 0 . 0 ...

  • Page 76

    70 x operation sequences ser-7000 operation manual void void previous item 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 5 . 0 0 3. Press clear . 4. Press void item . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 5 . 0 0...

  • Page 77

    Ser-7000 operation manual operation sequences x 71 void item with condiments 1. Enter items. 1 h o t d o g $ 1 . 6 9 m u s t a r d 1 med coke $1.00 l 1 p 0 1 t a x e s 0 . 0 0 t o t a l 2 . 6 9 2. Press clear . 3. Press void . 4. Press hot dog . 1 med coke $1.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 1 . 0...

  • Page 78

    72 x operation sequences ser-7000 operation manual cursor void (using cursor up & cursor down) 1. Enter items. 1 h o t d o g $ 1 . 6 9 m u s t a r d 1 h o t d o g $ 1 . 6 9 c a t s u p 1 med coke $1.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 4 . 3 8 2. Use the n or p keys to highlight the item you wish to v...

  • Page 79

    Ser-7000 operation manual operation sequences x 73 cursor void a condiment 1. Enter items. 1 h o t d o g $ 1 . 6 9 m u s t a r d 1 h o t d o g $ 1 . 6 9 c a t s u p 1 med coke $1.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 4 . 3 8 2. Use the n or p keys to highlight the condiment you wish to void 1 h o t d o...

  • Page 80

    74 x operation sequences ser-7000 operation manual transaction void entry of the current time may be required before a transaction void sequence. See “general function options” in the program manual . If time entry is required, the subsequent void operation will adjust the time report for the correc...

  • Page 81

    Ser-7000 operation manual operation sequences x 75.

  • Page 82

    76 x operation sequences ser-7000 operation manual merchandise return 1. Press plu #2 . 1 plu #2 $2.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 2 . 0 0 2. Press mdse rtrn . 1 plu #2 $2.00 l 1 p 0 1 t a x 0 . 0 0 t o t a 2 . 0 0 3. Enter item to be returned. 1 p l u # 2 $ 2 . 0 0 -1 plu #7 -1.00 l 1 p 0 1 t a...

  • Page 83: % Key Operations

    Ser-7000 operation manual operation sequences x 77 % key operations the % (percentage) key is programmable and may be set up to handle a variety of discounts, surcharges or coupons. Up to 10 keys are available, each can: x apply to a sale or an item, x accept an amount entry or calculate a percentag...

  • Page 84

    78 x operation sequences ser-7000 operation manual sale (subtotal) discounts open percentage discount (or overriding a preset percentage) %1 key is programmed as an open percentage discount on the entire sale, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $...

  • Page 85

    Ser-7000 operation manual operation sequences x 79 preset percentage discount %2 key is programmed as a preset (10%) discount on the entire sale, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 3. Press sbtl. 4. P...

  • Page 86

    80 x operation sequences ser-7000 operation manual amount subtotal discount %3 key is programmed as an open amount discount on the entire sale, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 3. Press sbtl. 4. Ent...

  • Page 87

    Ser-7000 operation manual operation sequences x 81 "do it" discount %4 key is programmed as a "do it" entire sale, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 3. Press sbtl . 4. Enter the amount of the tender ...

  • Page 88

    82 x operation sequences ser-7000 operation manual item discounts open percentage discount (or overriding a preset percentage) the %1 key is programmed as an open percentage discount on an item, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 ...

  • Page 89

    Ser-7000 operation manual operation sequences x 83 preset percentage discount the %2 key is programmed as a preset (10%) discount on an item, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 3. Press the %2 key. 1 ...

  • Page 90

    84 x operation sequences ser-7000 operation manual discount on cursor selected item the %3 key is programmed as a preset (10%) discount on an item, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a . . 5 . 3 0 3. Press the ...

  • Page 91

    Ser-7000 operation manual operation sequences x 85 store (item) coupon the %1 key is programmed as an open amount discount on an item (store coupon) , taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 3. Enter the a...

  • Page 92

    86 x operation sequences ser-7000 operation manual surcharges preset % surcharge on an entire sale the %1 key is programmed as a preset (10%) surcharge on the entire sale, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5...

  • Page 93

    Ser-7000 operation manual operation sequences x 87 open % key surcharge (or overriding a preset percentage) the %3 key is programmed as an open percentage surcharge on the entire sale, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . ...

  • Page 94

    88 x operation sequences ser-7000 operation manual preset % surcharge on an item the %2 key is programmed as a preset (10%) surcharge on an item, taxable by tax 1 at 6%. 1. Press plu#2 . 2. Press plu#3 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 3. Press the %2 key...

  • Page 95

    Ser-7000 operation manual operation sequences x 89 age verification sale of age restricted items (i.E. Alcohol, tobacco) can be controlled at the point of sale by forcing to operator to enter a date of birth before a controlled item can be registered. 1. Register an item that has been programmed for...

  • Page 96

    90 x operation sequences ser-7000 operation manual not found plu designed to be used in a scanning system, the not found plu key allows the operator to immediately enter basic plu information for an item that is not in the plu file. If the "not found plu" message displays when a plu is entered (or w...

  • Page 97

    Ser-7000 operation manual operation sequences x 91 5. Enter the primary group link for the plu, press enter . The descriptor entry box displays. L 1 p 0 1 c l e a r d o n e e n t e r 6. Use the alpha keyboard overlay to type the descriptor for the item, press enter. The item is registered. 1 s u m m...

  • Page 98

    92 x operation sequences ser-7000 operation manual guest check operations overview the ser-7000 can employ a manual previous balance, hard check, or soft check system. If manual previous balance is selected, the check balance is not saved in memory and is input manually by the operator (use the manu...

  • Page 99

    Ser-7000 operation manual operation sequences x 93 t b l # ( 1 ) c h e c k # g s t # e m p b a l a n c e 6 10 2 1 5.30 6 1 1 2 1 9 . 5 4 e n t e r d o n e # of guests entry is optional and is controlled by system flag. The number of guests may be required on all transactions or only on tracking tran...

  • Page 100

    94 x operation sequences ser-7000 operation manual manual previous balance notes: neither the new balance or transaction items are stored in memory and neither can be recalled when using manual previous balance posting. You must set memory allocation to “hard” check to post manual balances. Although...

  • Page 101

    Ser-7000 operation manual operation sequences x 95 adding to a check 1. Enter amount, press p/bal . P/bal 5.30 l 1 p 0 1 t a x 0 . 0 0 t o t a 5 . 3 0 2. Enter items. P / b a l 5 . 3 0 1 p l u # 4 $ 4 . 0 0 1 plu #5 $5.00 l 1 p 0 1 t a x 0 . 5 4 t o t 1 4 . 8 4 3. Press store #1 . Paying a check 1. ...

  • Page 102

    96 x operation sequences ser-7000 operation manual p / b a l 1 4 . 8 4 t a x 0 . 0 0 l 1 p 0 1 c a s h 1 0 . 0 0 c h a 4 . 7 0 2. Press cash , or: enter amount and press cash , or press check , or enter amount and press check , or press one of the miscellaneous tender keys, or enter amount and press...

  • Page 103

    Ser-7000 operation manual operation sequences x 97 hard check posting with "hard check" posting, only current balances are stored in memory. Procedures and options relating to beginning , adding to and paying a check are the same on "hard" and "soft" check posting, except it is necessary to print an...

  • Page 104

    98 x operation sequences ser-7000 operation manual soft check posting it is not necessary to print the check at each posting. The print check key will print the check at the designated printer. The print check key can be programmed to automatically service the transaction. Beginning a check c 1 0 0 ...

  • Page 105

    Ser-7000 operation manual operation sequences x 99 4. Enter items. C 1 0 0 / t 2 / g 2 / e m p l o y e e 1 1 p l u # 4 $ 4 . 0 0 1 plu #5 $5.00 l 1 p 0 1 t a x 0 . 5 4 t o t a 9 . 0 0 5. Press the appropriate store check function, i.E. Store #1 . C 1 0 0 / t 2 / g 2 / e m p l o y e e 1 1 p l u # 4 $...

  • Page 106

    100 x operation sequences ser-7000 operation manual 4. Enter items. C 1 0 0 / t 2 / g 2 / e m p l o y e e 1 1 p l u # 4 $ 4 . 0 0 1 p l u # 5 $ 5 . 0 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 8 4 t o t 1 4 . 8 4 5. Pres...

  • Page 107

    Ser-7000 operation manual operation sequences x 101 t b l # ( 1 ) c h e c k # g s t # e m p b a l a n c e 6 10 2 1 10.01 6 1 1 2 1 1 4 . 8 4 e n t e r d o n e if more than one check is open for the table, the checks will be listed: press the n or p keys to select the check you wish to open. 3. Press...

  • Page 108

    102 x operation sequences ser-7000 operation manual 5. Press check , or enter amount and press check . C 1 1 / t 2 / g 2 / e m p l o y e e 1 1 p l u # 2 $ 2 . 0 0 1 p l u # 3 $ 3 . 0 0 1 p l u # 4 $ 4 . 0 0 1 p l u # 5 $ 5 . 0 0 t a x 0 . 8 4 l 1 p 0 1 c h e c k 1 0 . 0 0 a m t 4 . 8 4 or, 5. Option...

  • Page 109

    Ser-7000 operation manual operation sequences x 103 sample print of soft check d a t e 0 2 / 2 7 / 2 0 0 4 f r i t i m e 1 7 : 2 3 r e c a l l c h k 1 # 1 2 3 1 f i l e t m i g n o n t 1 $ 1 4 . 9 9 1 m a r g a r i t a t 1 $ 3 . 7 5 1 t r o u t t 1 $ 1 6 . 9 5 1 p i n a c o l a d a t 1 $ 4 . 0 0 t a...

  • Page 110

    104 x operation sequences ser-7000 operation manual seat # assignment the seat # system may be employed in a soft check system. Its purposes are: x to separate orders by individuals so that orders are identified by individual on kitchen requisitions. X to facilitate separate payments. Seat # entry c...

  • Page 111

    Ser-7000 operation manual operation sequences x 105 5. Enter the seat number for the next item, press the seat # key. C 1 0 0 / t 0 / g 0 / e m p l o y e e 1 1 steak s1 $10.00 l 1 p 0 1 t a x 0 . 6 0 t o t 1 0 . 6 0 6. Enter the next item and its' condiments. C 1 0 0 / t 0 / g 0 / e m p l o y e e 1 ...

  • Page 112

    106 x operation sequences ser-7000 operation manual optional seat # entry x when seat # is not compulsory, press the n or p keys to select a main item (not a condiment). Press seat # , then enter a seat number for that item. X items not assigned to a different seat number will default to seat #1. 1....

  • Page 113

    Ser-7000 operation manual operation sequences x 107 splitting consolidated items for seat assignment when like items are consolidated, press the split item key to separate items for separate seat assignment. 1. Press the n key to select items that are consolidated on the screen. C 1 0 0 / t 0 / g 0 ...

  • Page 114

    108 x operation sequences ser-7000 operation manual c 1 0 0 / t 0 / g 0 / e m p l o y e e 1 seat#01 0.30 $10.00 s e a t # 0 2 0 . 3 0 $ 1 0 . 0 0 l 1 p 0 1 t a x 0 . 3 0 t o t 1 0 . 3 0 3. Press the n or p keys as necessary to select a different seat. Note that the taxes and the total for the seat a...

  • Page 115

    Ser-7000 operation manual operation sequences x 109 hold/print hold this feature is used in a table service restaurant. It prevents kitchen printer /kvs instructions from being sent immediately after items are registered and stored. For example, an employee registers a customer order consisting of a...

  • Page 116

    110 x operation sequences ser-7000 operation manual hold an item 1. Press the n or p keys to position the cursor on the item you wish to hold. C 1 1 / t 2 / g 2 / e m p l o y e e 1 1 s t e a k d i n n e r $ 8 . 0 0 1 s h r i m p a p p $ 3 . 9 5 1 prime rib $9.95 1 o n i o n r i n g $ 2 . 9 5 l 1 p 0...

  • Page 117

    Ser-7000 operation manual operation sequences x 111 print all held items c 1 1 / t 2 / g 2 / e m p l o y e e 1 h 1 steak dinner 8.00 1 s h r i m p a p p 3 . 9 5 h 1 p r i m e r i b 9 . 9 5 1 o n i o n r i n g 2 . 9 5 l 1 p 0 1 t a x 1 . 4 9 t o t 2 6 . 3 4 1. Recall an order with held items. (flag i...

  • Page 118

    112 x operation sequences ser-7000 operation manual print an individual item 1. Recall an order with held items. (flag is set to no to not automatically select held items.) c 1 1 / t 2 / g 2 / e m p l o y e e 1 h 1 s t e a k d i n n e r $ 8 . 0 0 1 s h r i m p a p p $ 3 . 9 5 h 1 p r i m e r i b $ 9...

  • Page 119

    Ser-7000 operation manual operation sequences x 113 display warning to operator tbl#(1) check# gst# time #held 2 11 2 10:18 1 1 1 2 2 1 9 : 3 5 2 e n t e r d o n e 1. Service any check for an employee. If the employee has held items, the following warning is displayed when flag is set to yes . The w...

  • Page 120

    114 x operation sequences ser-7000 operation manual repeat you can repeat the last items posted by using the repeat key. This simplifies registration of another round of drinks. C 1 0 0 / t 0 / g 0 / e m p l o y e e 1 1 s t e a k $ 1 0 . 0 0 1 s e a f o o d $ 1 0 . 0 0 l 1 p 0 1 t a x 1 . 2 0 t o t ...

  • Page 121

    Ser-7000 operation manual operation sequences x 115 c 1 0 0 / t 0 / g 0 / e m p l o y e e 1 1 b e e r $ 2 . 0 0 1 w i n e $ 2 . 5 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 b e e r $ 2 . 0 0 1 w i n e $ 2 . 5 0 r o l 1 p 0 1 t a x 1 . 7 4 t o t 3 0 . 7 4 8. Press repeat . No...

  • Page 122

    116 x operation sequences ser-7000 operation manual transfer table if permitted by authority level programming, an employee is allowed to move a check to a different table by re-entering a different table number. This can be done multiple times, if necessary. 1. Recall a check by entering a table or...

  • Page 123

    Ser-7000 operation manual operation sequences x 117 combine checks for payment 1. Sign on an employee. 2. Press the add check key a d d c h e c k s f o r p a y m e n t t b l c h e c k # e m p l . B a l a n c e l 1 p 0 1 t a x 0 . 0 0 t o t a 0 . 0 0 3. Enter the table # or check # of the first check...

  • Page 124

    118 x operation sequences ser-7000 operation manual transfer check checks can be transferred in two ways: x individually, by signing on a new employee when the check is open. The "automatic transfer check" system flag must be set to y to allow this option. X individually or in groups, from the trans...

  • Page 125

    Ser-7000 operation manual operation sequences x 119 t b l # ( 1 ) c h e c k # g s t # e m p b a l a n c e 6 1 0 2 1 1 0 . 0 1 6 11 2 1 5.00 e n t e r d o n e 7. To transfer a single check, select one check . 8. From the list check screen, press the n or p keys to select a c check. 9. Press enter to ...

  • Page 126: Fast Food Operations

    120 x operation sequences ser-7000 operation manual fast food operations the ser-7000 offers four distinct tracking files. It is possible to use the tracking files for different purposes within the same system. For example, (in a restaurant) one tracking file could be used for check/table tracking, ...

  • Page 127

    Ser-7000 operation manual operation sequences x 121 drive thru store in the following examples, recall check # and store check keys have been programmed with the "drive thru" function. 1. Enter items. 1 h a m b $ 2 . 0 0 1 chick nug $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 2. Press the appropri...

  • Page 128

    122 x operation sequences ser-7000 operation manual 3. Finalize the transaction with cash , check or one of the miscellaneous tender functions. 1 h a m b $ 2 . 0 0 1 c h i c k n u g $ 3 . 0 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 coke $1.00 t a x 0 . 3 6 l 1 p 0 1 c a s h...

  • Page 129

    Ser-7000 operation manual operation sequences x 123 alpha text use to type a name or message that will be associated with a soft check. Press the alpha text key anytime after a check has been opened, then type a message (up to 15 characters) using the alpha keyboard overlay and press enter . The mes...

  • Page 130

    124 x operation sequences ser-7000 operation manual drive thru park enter a number and press park order to park or "suspend" an order on the video monitor until the order is completely filled. In the case of a drive through order that cannot be completed when the customer arrives at the pick-up wind...

  • Page 131: Miscellaneous Operations

    Ser-7000 operation manual operation sequences x 125 miscellaneous operations function key wlu a wlu can serve as a menu of function keys that are not located on the keyboard. For example, manager functions, or different types of discounts and coupons could be kept on a wlu menu to save space on the ...

  • Page 132

    126 x operation sequences ser-7000 operation manual # (non-add) key you can enter a reference number for an item or transaction. For example, you could enter a customer number, drivers license identification number, check number or sku number for an item. 1. Enter a non-adding number (entry limit se...

  • Page 133: Finalizing Transactions

    Ser-7000 operation manual operation sequences x 127 finalizing transactions cash tender 1. Enter items. 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 2. Press cash . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 t a x 0 . 3 0 l 1 p 0 1 c a s h 5 . 3 0 or, enter amount tendered ...

  • Page 134

    128 x operation sequences ser-7000 operation manual 2. Press check . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 t a x 0 . 3 0 l 1 p 0 1 c h e c k 5 . 3 0 c h a n 2 . 0 0 or, enter amount tendered and press check . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 t a x 0 . 3 0 l 1 p 0 1 c h e c k 1 0 . 0 0 c h a n 4 ....

  • Page 135

    Ser-7000 operation manual operation sequences x 129 misc (charge) tender 1. Enter items. 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 l 1 p 0 1 t a x 0 . 3 0 t o t a 5 . 3 0 2. Press the appropriate miscellaneous tender function, i.E. Misc tend1 . 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 t a x 0 . 3 0 l 1 p 0 1...

  • Page 136

    130 x operation sequences ser-7000 operation manual split tender multiple payments can be recorded for a single transaction. Cash, check, and/or misc. Tenders can be recorded in any order, as many times as necessary to pay the entire transaction. 1. Enter items. 1 p l u # 2 $ 2 . 0 0 1 plu #3 $3.00 ...

  • Page 137

    Ser-7000 operation manual operation sequences x 131 split payment 1. Recall the check. C 1 0 0 / t 2 / g 0 / e m p l o y e e 1 2 b e e r 4 . 0 0 2 w i n e 5 . 0 0 l 1 p 0 1 t a x 0 . 5 4 t o t a 9 . 5 4 c 1 0 0 / t 2 / g 0 / e m p l o y e e 1 2 b e e r 4 . 0 0 2 w i n e 5 . 0 0 l 1 p 0 1 t a x 0 . 5...

  • Page 138

    132 x operation sequences ser-7000 operation manual tray subtotal (do not to confuse tray subtotal with add check , which is used to add separate tracking transactions for payment.) if necessary, subtotal discounts can be applied to different segments of the transaction. 1. Enter items. 1 p l u # 2 ...

  • Page 139

    Ser-7000 operation manual operation sequences x 133 5. Pay entire sale with cash , check or by one of the miscellaneous tender functions (charge). 1 p l u # 4 $ 4 . 0 0 1 plu #5 $5.00 t a x 0 . 8 4 l 1 p 0 1 c a s h 1 4 . 8 4 foreign currency subtotal & tender 1. Enter items. 1 p l u # 2 $ 2 . 0 0 1...

  • Page 140

    134 x operation sequences ser-7000 operation manual food stamp subtotal & tender food stamp options include: x the fd/s tend key can be programmed to forgive tax on items paid for with food stamps. X food stamp change of less than $1 can be applied toward the sale or given as change. 1. Enter items....

  • Page 141: Post-Finalization Procedures

    Ser-7000 operation manual operation sequences x 135 post-finalization procedures paid order recall press the paid recall key to view the previous transaction. Press the paid recall key again to view the next previous transaction. Up to 10 preceding transactions (depending upon memory allocation) may...

  • Page 142

    136 x operation sequences ser-7000 operation manual.

  • Page 143: X-Mode Procedures

    Ser-7000 operation manual x-mode procedures x 137 x-mode procedures x-mode manager menu x - m o d e m a n a g e r m e n u 1. Manager operation 2 . X r e p o r t s 3 . T r a i n i n g 4 . S e t d a t e & t i m e 5 . C a s h d e c l a r a t i o n 6 . K e y b o a r d & p r i c e l e v e l 7 . T i m e c...

  • Page 144: Manager Operation

    138 x x-mode procedures ser-7000 operation manual manager operation some functions may be programmed to operate only when the register is in manager operation mode. Manager control of functions inside of a sales transaction if manager control is required to access a function inside of a sale, the me...

  • Page 145: X Reports

    Ser-7000 operation manual x-mode procedures x 139 x reports 1. Select x reports from the x mode manager menu. The x- reports screen displays. X - r e p o r t s l 1 r e p o r t # : 00 x e n t e r r e p o r t n u m b e r – [ e n t e r ] x [ e n t e r ] t o v i e w r e p o r t l i s t x [ e s c ] t o r...

  • Page 146

    140 x x-mode procedures ser-7000 operation manual 1. Financial 31. Checks for track 1 2. Sales by time period 32. Checks for track 2 3. All plus 33. Checks for track 3 4. From/to plus 34. Checks for track 4 5. Plus by group 35. Open check for selected emp. 6. Plus by grp for selected grp 36. Open ch...

  • Page 147

    Ser-7000 operation manual x-mode procedures x 141 3. After selecting a report, the x-report options screen displays. X-report option l1 report#: 1 financial 1. Report type : daily (x1) 2. Irc options : standalone esc enter np done:make report 4. Press the n or p keys to select a field. 5. The arrow ...

  • Page 148: Training

    142 x x-mode procedures ser-7000 operation manual top 20 plus report selection window the report option window for the top 20 plus report is different, as there is an additional option to select the sorting method. This example shows the familiar x- report options screen with the additional option #...

  • Page 149: Set Date & Time

    Ser-7000 operation manual x-mode procedures x 143 set date & time s e t d a t e & t i m e 1 . T i m e : ( 0 0 : 0 0 - 2 3 : 5 9 ) 00:00 2 . D a t e : 0 1 - 0 1 - 9 9 3 . D a t e p r i n t : m m d d y y 1. Select set date & time from the x mode menu. 2. Press the n or p keys to select a field. 3. Typ...

  • Page 150: Cash Declaration

    144 x x-mode procedures ser-7000 operation manual cash declaration see “report options” in the samsung ser-7000 program manual to make cash declaration compulsory. If cash declaration is compulsory, the operator must first enter the cash drawer totals before generating a report that reveals the expe...

  • Page 151: Keyboard & Price Level

    Ser-7000 operation manual x-mode procedures x 145 keyboard & price level the current keyboard level and/or price levels are set with this program. K e y b o a r d & p r i c e l e v e l k e y b o a r d l e v e l : ( 1 - 5 ) 1 p r i c e l e v e l : ( 1 - 2 0 ) 0 1 1. Select keyboard & price level from...

  • Page 152: Time Clock Edit

    146 x x-mode procedures ser-7000 operation manual time clock edit daily, weekly, or period-to-date time clock errors can be corrected with this function. Note: memory must be allocated for z1-z5 reports in order to access data for editing. T i m e c l o c k e d i t 1.X/z1(daily edit 2 . X / z 2 e d ...

  • Page 153

    Ser-7000 operation manual x-mode procedures x 147 x/z1 (daily edit) the x/z1 (daily edit) function allows you to edit actual punch in/out times for the day. (after the z1 time keeping report is taken, only hours worked totals can be edited at the z2-z5 levels.) 1. Select x/z1 (daily edit). 2. At the...

  • Page 154

    148 x x-mode procedures ser-7000 operation manual x/z2 to x/z5 edit note: memory must be allocated for z2-z5 reports in order to access data for editing. T i m e c l o c k e d i t 1. Employee1 2 . E m p l o y e e 2 3 . E m p l o y e e 3 4 . E m p l o y e e 4 5 . E m p l o y e e 5 6 . E m p l o y e e...

  • Page 155: Edit Inventory Item

    Ser-7000 operation manual x-mode procedures x 149 edit inventory item a menu-explosion type inventory system is set up when plus are linked to a recipe. (see “plu status group” in the samsung ser-7000 program manual. ) recipes and their inventory items are set up and maintained from the ingredient i...

  • Page 156

    150 x x-mode procedures ser-7000 operation manual 1. Select edit inventory item from the x-mode manager menu. The edit inventory item# screen displays for the first inventory item. Edit inventory item# 1 bun $ 0.115 actual inventory 00000.000 receipt 00000.000 transfer in 00000.000 transfer out 0000...

  • Page 157: Edit Plu Stock

    Ser-7000 operation manual x-mode procedures x 151 edit plu stock plu stock is a simple inventory system where each whole unit plu activity subtracts a value of "1" from the stock counter. (note that if multiplication or decimal multiplication is used when the plu is registered, the resulting quantit...

  • Page 158

    152 x x-mode procedures ser-7000 operation manual p l u # 00000000000001 s t o c k ( a d d ) d e s c r i p t o r : p l u 1 s t o c k 0 . 0 0 4. The screen displays stock for first plu. Enter the number of the plu you wish to edit, or press the page up or page dn keys until the plu you wish to edit i...

  • Page 159: Drawer Assignment

    Ser-7000 operation manual x-mode procedures x 153 drawer assignment drawer assignment allows you to choose the cash drawer that will open for each employee. If you connect optional multiple drawers, you can select the employee or employees that will work out of each drawer. You can also choose not t...

  • Page 160

    154 x x-mode procedures ser-7000 operation manual.

  • Page 161: Reports & Balancing

    Ser-7000 operation manual reports & balancing x 155 reports & balancing report table the following table summarizes all of the ser-7000 reports, the mode in which they are available and whether the report is available from an individual register or from a group of registers through irc. Report numbe...

  • Page 162

    156 x reports & balancing ser-7000 operation manual report number/name mode available individual/irc 18. Drawer totals x1 - x5 individual/irc 19. Drawer 1/2/3 x1 - x5 individual/irc 20. Labor groups x1/z1-x2/z2 irc 21. Sales and labor % x1 - x5 irc 22. Daily sales x/z individual/irc 23. Groups by ti...

  • Page 163

    Ser-7000 operation manual reports & balancing x 157 report number/name mode available individual/irc 48. Stock by individual group x/z individual/irc 49. Food cost x/z irc 50. Plu minimum stock x/z irc 51. Electronic journal x/z individual 52. String report #1 x1/z1 - x5/z5 individual/irc 53. String...

  • Page 164: Z-Reports

    158 x reports & balancing ser-7000 operation manual z-reports 1. Turn the control lock to the z position to display the z-reports screen. Z - r e p o r t s r e p o r t # : 00 x e n t e r r e p o r t n u m b e r a n d [ e n t e r ] x [ e n t e r ] t o v i e w r e p o r t l i s t e n t e r z - r e p o...

  • Page 165

    Ser-7000 operation manual reports & balancing x 159 1. Financial 31. Checks for track 1 2. Sales by time period 32. Checks for track 2 3. All plus 33. Checks for track 3 4. From/to plus 34. Checks for track 4 5. Plus by group 35. Open check for selected emp. 6. Plus by grp for selected grp 36. Open ...

  • Page 166

    160 x reports & balancing ser-7000 operation manual 3. After selecting a report, the z-report options screen displays. Z-report options report#: 1 financial 1. Report type : daily (z1) 2. Irc options : irc all sc enter np done:make report 4. Press the n or p keys to select a field. 5. The arrow indi...

  • Page 167: Balancing Formulas

    Ser-7000 operation manual reports & balancing x 161 balancing formulas +/- net sales = plu sales total + tax 1 amount + tax 2 amount + tax 3 amount + tax 4 amount + tax 5 amount + tax 6 amount + item coupon total (when net=n) + item percentage discount (when net=n) + sale coupon amounts + sale perce...

  • Page 168

    162 x reports & balancing ser-7000 operation manual.

  • Page 169: Sample Reports

    Ser-7000 operation manual sample reports x 163 sample reports financial report d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 1 2 f i n a n c i a l r e p o r t x 1 r e p o r t 0 0 0 4 d e s c r i p t o r c o u n t t o t a l + p l u l v l 1 t t l 8 3 $ 2 2 3 . 0 5 - p l u l v l 1 t t l 0 $ 0 . 0 0 +...

  • Page 170

    164 x sample reports ser-7000 operation manual - p l u l v l 1 3 t t l 0 $ 0 . 0 0 + p l u l v l 1 4 t t l 0 $ 0 . 0 0 - p l u l v l 1 4 t t l 0 $ 0 . 0 0 + p l u l v l 1 5 t t l 0 $ 0 . 0 0 - p l u l v l 1 5 t t l 0 $ 0 . 0 0 + p l u l v l 1 6 t t l 0 $ 0 . 0 0 - p l u l v l 1 6 t t l 0 $ 0 . 0 0 +...

  • Page 171

    Ser-7000 operation manual sample reports x 165 % 7 0 $ 0 . 0 0 % 8 0 $ 0 . 0 0 % 9 0 $ 0 . 0 0 % 1 0 0 $ 0 . 0 0 n e t s a l e s 2 7 $ 2 3 6 . 2 7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - c r e d i t t a x 1 0 $ 0 . 0 0 c r e d i t t a x 2 0 $ 0 . 0 0 c r e d i t t a x 3 0 $ 0...

  • Page 172

    166 x sample reports ser-7000 operation manual m i s c 6 t e n d 0 $ 0 . 0 0 m i s c 7 t e n d 0 $ 0 . 0 0 m i s c 8 t e n d 0 $ 0 . 0 0 m i s c 9 t e n d 0 $ 0 . 0 0 m i s c 1 0 t e n d 0 $ 0 . 0 0 m i s c 1 1 t e n d 0 $ 0 . 0 0 m i s c 1 2 t e n d 0 $ 0 . 0 0 m i s c 1 3 t e n d 0 $ 0 . 0 0 m i s...

  • Page 173

    Ser-7000 operation manual sample reports x 167 m i s c 1 3 d e c a m t 0 $ 0 . 0 0 m i s c 1 4 d e c a m t 0 $ 0 . 0 0 m i s c 1 5 d e c a m t 0 $ 0 . 0 0 m i s c 1 6 d e c a m t 0 $ 0 . 0 0 c o u p o n s a l e s 0 $ 0 . 0 0 r o u n d t t l 0 $ 0 . 0 0 m & m t t l 0 $ 0 . 0 0 t r a n s f e r t t l 0...

  • Page 174: Sales By Time Period

    168 x sample reports ser-7000 operation manual sales by time period d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 4 3 s a l e s b y t i m e r e p o r t x 1 r e p o r t 0 0 0 1 t i m e p e r i o d # / c u s t o m e r s t o t a l 0 0 : 0 0 - 0 0 : 2 9 1 $ 0 . 0 0 0 0 : 3 0 - 0 0 : 5 9 0 $ 0 . 0 0 0 ...

  • Page 175

    Ser-7000 operation manual sample reports x 169 1 9 : 0 0 - 1 9 : 2 9 0 $ 0 . 0 0 1 9 : 3 0 - 1 9 : 5 9 0 $ 0 . 0 0 2 0 : 0 0 - 2 0 : 2 9 0 $ 0 . 0 0 2 0 : 3 0 - 2 0 : 5 9 0 $ 0 . 0 0 2 1 : 0 0 - 2 1 : 2 9 0 $ 0 . 0 0 2 1 : 3 0 - 2 1 : 5 9 0 $ 0 . 0 0 2 2 : 0 0 - 2 2 : 2 9 0 $ 0 . 0 0 2 2 : 3 0 - 2 2...

  • Page 176: Plu

    170 x sample reports ser-7000 operation manual plu all plus from/to plus plus by group plus by group for selected group top 20 plus plu zero sales plu zero sales by group plu sales by price level d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 2 4 f r o m / t o p l u s r e p o r t x 1 r e p o r t 0 ...

  • Page 177

    Ser-7000 operation manual sample reports x 171 0 2 / 0 0 / 0 0 4 $ 0 . 0 0 p l u 6 0 0 0 0 0 0 0 0 0 0 0 0 0 6 0 1 / 0 0 / 0 0 2 $ 0 . 0 0 r e g l e m o n a d e 0 0 0 0 0 0 0 0 0 0 0 0 0 7 0 4 / 0 0 / 0 0 1 $ 0 . 0 0 s m f r y 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 . 3 4 % 0 2 / 0 0 / 0 0 1 $ 1 . 8 8 r e g f...

  • Page 178

    172 x sample reports ser-7000 operation manual r c o m b o # 3 0 0 0 0 0 0 0 0 0 0 0 0 2 1 2 . 8 9 % 0 1 / 0 0 / 0 0 4 $ 1 5 . 9 6 r c o m b o # 4 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 . 1 7 % 0 1 / 0 0 / 0 0 3 $ 1 1 . 9 7 r c o m b o # 5 0 0 0 0 0 0 0 0 0 0 0 0 2 3 1 . 4 4 % 0 1 / 0 0 / 0 0 2 $ 7 . 9 8 r c...

  • Page 179: Employees

    Ser-7000 operation manual sample reports x 173 employees individual employee employee currently signed on active employee d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 3 2 i n d i v . E m p l o y e e r e p o r t x 1 r e p o r t 0 0 0 1 e m p l o y e e # 1 a m y l . D e s c r i p t o r c o u n t t ...

  • Page 180: Group

    174 x sample reports ser-7000 operation manual group d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 4 7 g r o u p s r e p o r t x 1 r e p o r t 0 0 0 1 # d e s c r i p t o r % c o u n t t o t a l 0 1 g r o u p 1 6 9 . 2 9 1 0 4 $ 3 8 1 . 8 8 0 2 g r o u p 2 2 2 . 7 6 7 2 $ 1 2 5 . 4 4 0 3 g r o u p...

  • Page 181: Drawer Totals

    Ser-7000 operation manual sample reports x 175 drawer totals d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 4 9 d r a w e r t o t a l s r e p o r t x 1 r e p o r t d e s c r i p t o r c o u n t t o t a l r / a 1 0 $ 0 . 0 0 r / a 2 0 $ 0 . 0 0 r / a 3 0 $ 0 . 0 0 r / a 4 0 $ 0 . 0 0 r / a 5 0 $ 0 ....

  • Page 182: Labor Groups

    176 x sample reports ser-7000 operation manual labor groups d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 4 9 l a b o r g r o u p s r e p o r t i r c r e g # 0 1 x 1 r e p o r t 0 0 0 1 d e s c r i p t o r h o u r s / m i n u t e s o w n e r 4 . 1 6 m a n a g e r 4 . 0 0 c o u n t e r 1 2 . 0 0 k ...

  • Page 183: Sales and Labor %

    Ser-7000 operation manual sample reports x 177 sales and labor % d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 1 : 0 6 s a l e s & l a b o r % r e p o r t i r c r e g # 0 1 x 1 r e p o r t 0 0 0 1 t i m e p e r i o d / i t e m 0 0 : 0 0 - 0 0 : 2 9 c u s t : 1 n e t : $ 0 . 0 0 a v / c u s : $ 0 . 0 0...

  • Page 184

    178 x sample reports ser-7000 operation manual s a l e s / m a n h o u r : $ 0 . 0 0 1 4 : 3 0 - 1 4 : 5 9 c u s t : 1 n e t : $ 1 . 0 5 a v / c u s : $ 1 . 0 5 h r s : 0 . 0 0 l b r c s t : $ 0 . 0 0 % / n e t : 0 . 1 7 % l a b o r $ / c u s t : $ 0 . 0 0 s a l e s / m a n h o u r : $ 0 . 0 0 1 8 :...

  • Page 185: Daily Sales

    Ser-7000 operation manual sample reports x 179 daily sales d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 1 : 5 7 d a i l y s a l e s r e p o r t x 2 r e p o r t 0 0 0 1 d a y c o u n t t o t a l 1 1 $ 0 . 0 0 2 3 2 9 $ 3 4 7 . 7 8 2 7 2 6 $ 2 3 6 . 2 7 t o t a l 5 6 $ 5 8 4 . 0 5 m i a k . N o . 0 0 0...

  • Page 186: Groups By Time Period

    180 x sample reports ser-7000 operation manual groups by time period reporting for each time period and each group. (selected groups and periods shown here to provide format.) d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 1 : 4 4 g r o u p s b y t i m e r e p o r t x 1 r e p o r t 0 0 0 1 t i m e p e ...

  • Page 187

    Ser-7000 operation manual sample reports x 181 g r o u p 3 1 $ 3 . 1 4 1 2 : 4 5 - 1 2 : 5 9 - 3 - 2 1 . 0 0 d e s c r i p t o r c o u n t t o t a l s t u f f - 3 - 2 1 . 0 0 1 3 : 0 0 - 1 3 : 1 4 7 7 $ 4 8 8 . 3 0 6 . 3 4 d e s c r i p t o r c o u n t t o t a l s t u f f 7 6 $ 4 8 5 . 1 7 g r o u p...

  • Page 188: Eat-In By Time Periods

    182 x sample reports ser-7000 operation manual eat-in by time periods d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 1 : 2 4 e a t - i n b y t i m e r e p o r t x 1 r e p o r t 0 0 0 1 t i m e p e r i o d # / c u s t o m e r s t o t a l 1 4 : 1 5 - 1 4 : 2 9 3 $ 8 3 . 0 7 1 4 : 3 0 - 1 4 : 4 4 1 $ 4 . ...

  • Page 189: Drive Thru By Time Periods

    Ser-7000 operation manual sample reports x 183 drive thru by time periods d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 1 : 2 4 e a t - i n b y t i m e r e p o r t d r i v e t h r u b y t i m e r e p o r t x 1 r e p o r t 0 0 0 1 t i m e p e r i o d # / c u s t o m e r s t o t a l 1 4 : 1 5 - 1 4 : 2 ...

  • Page 190: Track By Time Periods

    184 x sample reports ser-7000 operation manual track by time periods track 1 by time periods track 2 by time periods track 3 by time periods track 4 by time periods d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 1 : 2 4 t r a c k 1 b y t i m e r e p o r t x 1 r e p o r t 0 0 0 1 t i m e p e r i o d # /...

  • Page 191: Open Check

    Ser-7000 operation manual sample reports x 185 open check open check for track 1 open check for track 2 open check for track 3 open check for track 4 open check for selected employee open check for current employee open check for track 1,2,3,&4 d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 1 : 2 4 o p...

  • Page 192: Product Mix

    186 x sample reports ser-7000 operation manual product mix d a t e 0 2 / 2 0 / 2 0 0 4 f r i t i m e 1 4 : 0 0 p r o d u c t m i x r e p o r t x 1 r e p o r t 0 0 0 1 p r o d u c t / t i m e u n i t # p i e c e c o u n t t o t a l c h i c k e n p c ( c h k n ) 0 7 : 0 0 - 0 7 : 5 9 0 0 0 9 # 0 0 0 7...

  • Page 193: Product Projections

    Ser-7000 operation manual sample reports x 187 product projections d a t e 0 2 / 2 0 / 2 0 0 4 f r i t i m e 1 4 : 0 0 p r o d u c t p r o j e c t r e p o r t x 1 r e p o r t 0 0 0 1 c h i c k e n p c ( c h k n ) f r i t i m e w e e k 1 w e e k 3 a v g w e e k 2 w e e k 4 0 7 : 0 0 - 9 0 2 . 2 0 7 :...

  • Page 194: Station Totals

    188 x sample reports ser-7000 operation manual station totals prints for each register in an irc configuration. D a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 2 : 0 2 s t a t i o n t o t a l s r e p o r t x 1 r e p o r t 0 0 0 1 d e s c r i p t o r c o u n t t o t a l i r c r e g # 0 1 n e t s a l e s ...

  • Page 195: Time Keeping

    Ser-7000 operation manual sample reports x 189 time keeping daily time keeping d a t e 0 1 / 2 7 / 2 0 0 4 w e d t i m e 1 2 : 0 2 t i m e k e e p i n g r e p o r t i r c r e g # 0 1 z 1 r e p o r t 0 0 0 2 e m p # s s n n a m e t i p s - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...

  • Page 196

    190 x sample reports ser-7000 operation manual weekly time keeping/period time keeping d a t e 0 2 / 2 1 / 2 0 0 4 s a t t i m e 1 6 : 2 4 t i m e k e e p i n g r e p o r t i r c r e g # 0 1 z 2 r e p o r t 0 0 0 1 e m p # s s n n a m e t i p s - - - - - - - - - - - - - - - - - - - - - - - - - - - -...

  • Page 197: Shift Report

    Ser-7000 operation manual sample reports x 191 shift report complete financial reporting is available for each of 4 possible shifts. The shift report format is identical to the financial report. See “financial report” on page 163..

  • Page 198: Inventory

    192 x sample reports ser-7000 operation manual inventory the inventory report can only be taken in irc, consolidate all registers mode. There is no inventory reporting by register, only store-wide. An example of the inventory report follows: d a t e 0 2 / 2 1 / 2 0 0 4 s a t t i m e 1 6 : 2 4 i n v ...

  • Page 199

    Ser-7000 operation manual sample reports x 193 f o o d c o s t $ 0 7 . 4 4 0 f o o d c o s t % 1 7 . 7 0 % i n v # 0 0 1 c h e e s e - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - b e g i n n i n g i n v e n t o r y 2 0 0 . 0 0 0 r e c e i p t s 0 0 . 0 0 0 t r a n s f e r i n s 0 0...

  • Page 200

    194 x sample reports ser-7000 operation manual definitions beginning inventory the beginning quantity as entered in p-mode (inventory - register begin quantity), for the first report. Additional reports will get the begin quantity from the end value, from the last “z” reset report. Receipts the rece...

  • Page 201

    Ser-7000 operation manual sample reports x 195 value of inventory the value of inventory items on hand. Value=[(end)*(cost)] variance +/- the varience +/-. Vr+/- =[(t.Use)-(a.Use)] variance cost the varience cost. V.Cst=[(vr+/-)*(cost)] efficiency % the efficiency percentage. Eff.%=[(100)-((t.Use)-(...

  • Page 202: Plu Stock

    196 x sample reports ser-7000 operation manual plu stock plus designated as stock plus (see plu status group programming) will appear on this report. D a t e 0 2 / 2 1 / 2 0 0 4 s a t t i m e 1 6 : 4 7 p l u s t o c k r e p o r t x 1 r e p o r t 0 0 0 1 p l u # d e s c r i p t o r c o u n t 0 0 0 0 ...

  • Page 203: Food Cost

    Ser-7000 operation manual sample reports x 197 food cost plus assigned to a recipe (see plu status group programming) will appear on this report. D a t e 0 2 / 2 1 / 2 0 0 4 s a t t i m e 1 6 : 5 1 f o o d c o s t r e p o r t c o n s o l i d a t e d ( 0 1 ) x 1 r e p o r t 0 0 0 1 h a m b u r g e r ...

  • Page 204: Electronic Journal

    198 x sample reports ser-7000 operation manual e m p l o y e e 1 n o . 0 0 0 0 1 4 r e g 0 1 definitions food cost % ((food cost)\(net sales)*100) usage count (sales count + promo count + waste count) item food cost combined cost of all angredients\recipies associated with the item. Usage cost (usag...

  • Page 205

    Ser-7000 operation manual sample reports x 199 1 p l u 1 0 .0 0 1 p l u 1 0 .0 0 1 p l u 1 0 .0 0 1 p l u 1 0 .0 0 1 p l u 2 t 1 $ 2 .0 6 1 p l u 2 t 1 $ 2 .0 7 1 p l u 2 t 1 $ 2 .0 8 1 p l u 2 t 1 $ 2 .0 9 1 p l u 2 t 1 $ 2 .1 0 i t e m s 1 0 .0 0 s u b t ot a l $ 1 2. 4 0 t a x to t a l $ 0 .6 8 t...

  • Page 206

    200 x sample reports ser-7000 operation manual n o .0 0 0 0 04 r eg 0 1 e t h a n t i m e 0 6 : 18 d a te 03 / 3 1/ 2 0 0 0 f r i 3 pl u 1 $ 6 . 00 i t e m s 3 . 00 su b t o ta l $ 6 . 00 to t a l $ 6 .0 0 ca s h $ 6. 0 0 * o r d er # 01 0 5 * n o .0 0 0 0 05 r eg 0 1 e t h a n t i m e 0 6 : 20

  • Page 207: Not Found Plu Report

    Ser-7000 operation manual sample reports x 201 not found plu report d a t e 0 1 / 3 0 / 2 0 0 4 s a t t i m e 1 0 : 0 9 n o t f o u n d p l u r e p o r t x 1 r e p o r t 0 0 0 1 d e s c r i p t o r n o t f o u n d p l u # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - s u m m i t a ...

  • Page 209: Glossary of Terms

    Ser-7000 operation manual glossary of terms x 203 glossary of terms activity count the activity counter keeps track of the number of times an entry is made on a plu, or function key. Add check the add check function is used to add multiple guest checks (tracking balances or soft checks) for payment ...

  • Page 210

    204 x glossary of terms ser-7000 operation manual auto grill use the auto grill option to send items individual items to the designated kitchen printer. Items are sent with a one item delay (at the next item or at subtotal.) auto scale registrations of plus with auto scale status will automatically ...

  • Page 211

    Ser-7000 operation manual glossary of terms x 205 condiment condiment plus are different from non-condiment plus in the manner they display and print during operations. Non-condiment plus are used for "main" items. Condiment items are indented and displayed/printed below a main item so that condimen...

  • Page 212

    206 x glossary of terms ser-7000 operation manual electronic journal the electronic journal is an area of memory designated to keep a sales journal. The electronic journal can be printed, if necessary, to provide a traditional record of all register activity. Error condition an error condition signa...

  • Page 213

    Ser-7000 operation manual glossary of terms x 207 initial clear the initial clear function allows you to exit any register activity and return to a beginning or cleared state. Any transaction that is in progress will be exited and totals for that transaction will not be updated. Irc inter register c...

  • Page 214

    208 x glossary of terms ser-7000 operation manual memory allocation memory allocation is a program that determines how the system memory is divided to provide the correct features for your application. For example, you may require more or less employee memory, plus, or reporting. Memory allocation a...

  • Page 215

    Ser-7000 operation manual glossary of terms x 209 chicken can be counted when a chicken dinner is sold. The number of units set as the piece count will be reflected in product mix reporting. Plu status link # also referred to as plu status group. The status link # contains the many of the configurab...

  • Page 216

    210 x glossary of terms ser-7000 operation manual receipt a receipt is a printed tape given to a customer as a record of the sale transaction. Recipe # a menu-explosion type inventory system is set up when plus are assigned to a recipe number. Register number the register number is a programmable nu...

  • Page 217

    Ser-7000 operation manual glossary of terms x 211 tare weight a tare is the amount of weight accounted for by the container or packaging. By entering a tare weight (as required by law in some areas) the weight of the container is subtracted and only the true weight of the product is measured on the ...

  • Page 219: Index

    Ser-7000 operation manual index x 213 index # # (non-add) key 124 # of guests 91 #/no sale 8 % % key 75 %1 - %10 9 a add check 5 alpha overlay 3 auto grill item 58 b balancing 153, 159 c canadian donut tax exemption 67 cancel 72 cancel 5 cash 5 cash declaration 142 cash tender 125 cash tip declare 1...

  • Page 220

    214 x index ser-7000 operation manual fd stmp shift 6 fd stmp subttl 6 fd stmp tend 6 finalizing transactions 125 financial report 161 food cost report 195 food stamp 62 food stamp subtotal & tender 132 foreign currency subtotal & tender 131 function key wlu 123 g grill auto item 58 group reports 17...

  • Page 221

    Ser-7000 operation manual index x 215 print hold 107 print hold 9 print screen 9 product mix report 184 product projections report 185 promo 59 promo 9 q quit (function key) 9, 27 r recall paid order 133 recall check # 1-4 10 recd acct 1-5 10 receipt 10 receipt issue 133 receipt on/off 10 received o...

  • Page 222

    216 x index ser-7000 operation manual item with condiments 70 multiple items with different condiments 70 one of multiple items 69 previous item 69 transaction 73 void item 11 w waste 60 waste 12 wlu 40, 42 function key 123 function key 12 plu registration 50, 51 wlus 48 multiple 48 x x reports 137 ...